agtel chetak spd sc6620-200g FLIGHT MODE - GSM-Forum

satrughna · 10-16-2011, 09:01

ANY ONE HAVE SOLUTION FOR Agtel chetak spd sc6620-200g FLIGHT MODE

I HAVE GPG DRAGON HERE IS LOG :

CPU: SC6620-200G Flash: User-defined how to solve?

Initializing...
DA_LIB_VER_3.6.0.2
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM46
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000105A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Unknow Manufacturer ID, Flash does not exist or failed to initialize H/W.
CPU: SC6620-200G Flash: NOR_UNKNOWN
setting the Flash Parameters...
Settings have been completed!
CPU: SC6620-200G Flash: User-defined
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Error: Erase Flash
?

MY PROBLEM NOT SOLVED

ANY OTHER WAY TO REMOVE FLIGHT MODE , I MEAN ANY CODE?

THANKS

**Mcnbox** · 10-16-2011, 19:23

I can tell you Mcnpro Box full supported SC6620-200G CPU

Best regards

Mcnbox

JONONItelecom™ · 10-17-2011, 10:29

Quote:

Originally Posted by satrughna

ANY ONE HAVE SOLUTION FOR Agtel chetak spd sc6620-200g FLIGHT MODE

I HAVE GPG DRAGON HERE IS LOG :

CPU: SC6620-200G Flash: User-defined how to solve?

Initializing...
DA_LIB_VER_3.6.0.2
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM46
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000105A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Unknow Manufacturer ID, Flash does not exist or failed to initialize H/W.
CPU: SC6620-200G Flash: NOR_UNKNOWN
setting the Flash Parameters...
Settings have been completed!
CPU: SC6620-200G Flash: User-defined
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Error: Erase Flash
?

MY PROBLEM NOT SOLVED

ANY OTHER WAY TO REMOVE FLIGHT MODE , I MEAN ANY CODE?

THANKS

with same working phone and write this phone your problem solved

satrughna · 10-19-2011, 05:35

flash write not support yet by gpg

sr8787 · 11-09-2011, 12:58

Just Format it with Avator box

anil.prajapati · 11-09-2011, 13:14

Quote:

Originally Posted by sr8787

Just Format it with Avator box

avator not support for flashing or formate

guddu ahmad · 11-09-2011, 17:00

Quote:

Originally Posted by satrughna

ANY ONE HAVE SOLUTION FOR Agtel chetak spd sc6620-200g FLIGHT MODE

I HAVE GPG DRAGON HERE IS LOG :

CPU: SC6620-200G Flash: User-defined how to solve?

Initializing...
DA_LIB_VER_3.6.0.2
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM46
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000105A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Unknow Manufacturer ID, Flash does not exist or failed to initialize H/W.
CPU: SC6620-200G Flash: NOR_UNKNOWN
setting the Flash Parameters...
Settings have been completed!
CPU: SC6620-200G Flash: User-defined
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Error: Erase Flash
?

MY PROBLEM NOT SOLVED

ANY OTHER WAY TO REMOVE FLIGHT MODE , I MEAN ANY CODE?

THANKS

bro. chek this code...........
*#3643366#
not work then
rehet cpu & flash ic and formate

saniamirza · 11-10-2011, 14:33

Quote:

Originally Posted by guddu ahmad

bro. chek this code...........
*#3643366#
not work then
rehet cpu & flash ic and formate

brother in which box you format this ic.plz tell me, and flight mode is a software problem not hardware.

madni shah · 11-11-2011, 04:30

@satrughna
Currently this Cpu SC6620-200G is not fully supported with any box,
if your phone is showing setting option read flash using expert mode http://forum.gsmhosting.com/vbb/7878873-post2.html get privacy protect code and try to do factory defaults !!

satrughna · 11-11-2011, 05:12

ha ha nothing working

all box failed this time

Initializing...
DA_LIB_VER_3.6.7.1
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000105A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_MX25U3235E
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
Error: Get Flash die baseaddress

GPGDragon Help · 11-11-2011, 08:33

Quote:

Originally Posted by satrughna

ha ha nothing working

all box failed this time

Initializing...
DA_LIB_VER_3.6.7.1
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000105A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_MX25U3235E
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
Error: Get Flash die baseaddress

GPGDragon Ver 2.10.rar
Download this one
second,select rate to 115200 then working,I has test

satrughna · 11-11-2011, 12:31

Quote:

Originally Posted by GPGDragon Help

GPGDragon Ver 2.10.rar
Download this one
second,select rate to 115200 then working,I has test

Absolutely not working

Initializing...
DA_LIB_VER_3.6.8.5
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000105A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_MX25U3235E
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Error: Unknow Signature. Failed to locate the user data partition.

Initializing...
DA_LIB_VER_3.6.8.5
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000105A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_MX25U3235E
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
Error: Get Flash die baseaddress
Failed to auto format.

only fake solution

madni shah · 11-11-2011, 14:21

Satrughna

Quote:

Absolutely not working

Quote:

only fake solution

bro auto format will be support soon,now you can solve your problem by flashing only Gpg dragon can flash your phone get flash file and flash your phone sure your problem will be solved.here is tested report.

http://forum.gsmhosting.com/vbb/f646...0-ver-1374234/

satrughna · 11-11-2011, 16:22

so this is not called solution

now where can i arrange similar handset?

better we dont talk more on this topic.

guddu ahmad · 11-11-2011, 18:37

Quote:

Originally Posted by satrughna

so this is not called solution

now where can i arrange similar handset?

better we dont talk more on this topic.

bro. update fermwear 1.58 100% work 6610 6620 cpu
plz try this.................

10-16-2011, 09:01	#1 (permalink)
satrughna No Life Poster Join Date: Sep 2010 Posts: 532 Member: 1404245 Status: Offline Thanks Meter: 73	agtel chetak spd sc6620-200g FLIGHT MODE ANY ONE HAVE SOLUTION FOR Agtel chetak spd sc6620-200g FLIGHT MODE I HAVE GPG DRAGON HERE IS LOG : CPU: SC6620-200G Flash: User-defined how to solve? Initializing... DA_LIB_VER_3.6.0.2 It is sensing the pinout fast... D-=6 D+=5 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM46 Connected...sending boot... FDL test...OK ArmBootMode: 6610000000105A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 ok Reading phone HW info... Unknow Manufacturer ID, Flash does not exist or failed to initialize H/W. CPU: SC6620-200G Flash: NOR_UNKNOWN setting the Flash Parameters... Settings have been completed! CPU: SC6620-200G Flash: User-defined Unlocking all blocks before program/erase... Unlock Done. Analyzing FileSystem... Done. Reset the user data area... Error: Erase Flash ? MY PROBLEM NOT SOLVED ANY OTHER WAY TO REMOVE FLIGHT MODE , I MEAN ANY CODE? THANKS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3210 Vibra-Mode with pclocals	mongoq	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-23-2001 15:54
Test mode	ericctc	Motorola Old Legacy (EMMI)	0	07-24-2000 07:22
Clone mode with PIC16C84 - need work HEX file	MP	Motorola Old Legacy (EMMI)	5	06-26-2000 12:17
Clone mode on d520	tomi_no	Motorola Old Legacy (EMMI)	1	05-23-2000 23:35

10-16-2011, 19:23	#2 (permalink)
Mcnbox Product Manager Join Date: Mar 2008 Posts: 1,891 Member: 726283 Status: Offline Sonork: 100.76027 Thanks Meter: 7,616	I can tell you Mcnpro Box full supported SC6620-200G CPU Best regards Mcnbox

10-19-2011, 05:35	#4 (permalink)
satrughna No Life Poster Join Date: Sep 2010 Posts: 532 Member: 1404245 Status: Offline Thanks Meter: 73	flash write not support yet by gpg

11-09-2011, 12:58	#5 (permalink)
sr8787 No Life Poster Join Date: Jun 2008 Location: Punjabi University India Posts: 1,473 Member: 788946 Status: Offline Sonork: 100.1682685 Thanks Meter: 502	Just Format it with Avator box

11-11-2011, 04:30	#9 (permalink)
madni shah No Life Poster Join Date: Jan 2009 Location: ---- Age: 35 Posts: 1,230 Member: 959010 Status: Offline Sonork: 100.1602440 Thanks Meter: 445	@satrughna Currently this Cpu SC6620-200G is not fully supported with any box, if your phone is showing setting option read flash using expert mode http://forum.gsmhosting.com/vbb/7878873-post2.html get privacy protect code and try to do factory defaults !!

11-11-2011, 05:12	#10 (permalink)
satrughna No Life Poster Join Date: Sep 2010 Posts: 532 Member: 1404245 Status: Offline Thanks Meter: 73	ha ha nothing working all box failed this time Initializing... DA_LIB_VER_3.6.7.1 It is sensing the pinout fast... D-=6 D+=5 Searching commport...please wait... Connecting... Spd USB-to-Serial=COM5 Connected...sending boot... FDL test...OK ArmBootMode: 6610000000105A00_01 Wait for init Commzero Security Engine... Done. Loading bootloader... Done. Changing baudrate... Set baudrate to 921600 is ok Reading phone HW info... Read info is done. CPU: SC6610/20 Flash: SF_MX25U3235E setting the Flash Parameters... Settings have been completed! setting the Serial Flash Parameters... Settings have been completed! Reading FileSystem info... Error: Get Flash die baseaddress

11-11-2011, 16:22	#14 (permalink)
satrughna No Life Poster Join Date: Sep 2010 Posts: 532 Member: 1404245 Status: Offline Thanks Meter: 73	so this is not called solution now where can i arrange similar handset? better we dont talk more on this topic.