2760 Rm-391 v 6.83 no network after unlock - GSM-Forum

urecel · 01-12-2010, 21:06

unlocked pm backup, and write back, but still no network

Rey_negro · 01-12-2010, 21:38

this is a problem with the path, the box apply a 3162 path in a 3168 mcu, fot that the phone become no network...

BR

Celhack · 01-12-2010, 21:43

Quote:

Originally Posted by Rey_negro

this is a problem with the path, the box apply a 3162 path in a 3168 mcu, fot that the phone become no network...

BR

Do you know if firmware in suport is 3162 too, or is 3168 original 06.83?

Orange_Dominica · 01-15-2010, 15:25

Hi...

If you flash UPP 3162 in a UPP 3168 product...then it wont boot.

The Downgrade-Upgrade is sucessfull if the phone boots.

The problem is the cyclone patch for 2760 UPP 3168....its not put in the correct area.

Notice that everyone has signal problems with the Cyclone patch
GSM ...800..1.9...900...1.8... North American + Euro.

:smokin

Celhack · 01-15-2010, 22:58

Quote:

Originally Posted by Orange_Dominica

Hi...

If you flash UPP 3162 in a UPP 3168 product...then it wont boot.

The Downgrade-Upgrade is sucessfull if the phone boots.

The problem is the cyclone patch for 2760 UPP 3168....its not put in the correct area.

Notice that everyone has signal problems with the Cyclone patch
GSM ...800..1.9...900...1.8... North American + Euro.

:smokin

Flash file in support is not 3162 is 3168, when you flash and 3168 sl2 with 3162 sl1 firmware your phone become sl1. I test flash in support area and phone is not sl1 it still in dct4 sl2.

Rey_negro · 01-15-2010, 23:17

Quote:

Flash file in support is not 3162 is 3168, when you flash and 3168 sl2 with 3162 sl1 firmware your phone become sl1. I test flash in support area and phone is not sl1 it still in dct4 sl2.

I said is a problem with the path, not with the flash...

01-12-2010, 21:06	#1 (permalink)
urecel No Life Poster Join Date: Jun 2007 Age: 37 Posts: 798 Member: 520810 Status: Offline Thanks Meter: 231	2760 Rm-391 v 6.83 no network after unlock unlocked pm backup, and write back, but still no network

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I need new update for pacth unlock 2760H RM-391 v.6.83 and 2610b RH-87 v7.04a	anthonny78	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	0	02-09-2010 08:32
2760 ver 6.83 no network after unlock.	gorgans	Cyclonebox	17	01-03-2010 19:24
2760h RM-391 version 6.83 unsupported ASICS	Unlockemall	Cyclonebox	13	12-30-2009 17:23
rm-391 version 6.83 flashfile	CuLo	Cyclonebox	0	11-27-2009 10:51

01-12-2010, 21:38	#2 (permalink)
Rey_negro Freak Poster Join Date: Dec 2006 Posts: 229 Member: 417512 Status: Offline Thanks Meter: 46	this is a problem with the path, the box apply a 3162 path in a 3168 mcu, fot that the phone become no network... BR

01-15-2010, 15:25	#4 (permalink)
Orange_Dominica No Life Poster Join Date: Oct 2004 Location: Dominica, West Indies Age: 63 Posts: 646 Member: 88701 Status: Offline Thanks Meter: 381	Hi... If you flash UPP 3162 in a UPP 3168 product...then it wont boot. The Downgrade-Upgrade is sucessfull if the phone boots. The problem is the cyclone patch for 2760 UPP 3168....its not put in the correct area. Notice that everyone has signal problems with the Cyclone patch GSM ...800..1.9...900...1.8... North American + Euro. :smokin