5800 SD repair problem. - GSM-Forum

hugmax · 03-10-2010, 15:27

Info from analyze phone.

Code:

Started Phone Security Analysis...
MCU Version	V ICPR72_09w20.12
MCU Date	10-09-09
Product		RM-356
Manufacturer	(c) Nokia
IMEI		358247031292456
Mastercode	2052733114
Reading Security Block...
Security block OK and saved to "RM-356_358247031292456_10032010_151709.SecurityBlock.PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
"1AD0000AA84F8B5250177E8D97A5E94602F68593.C00013DF" Exists, That is good...
Checking SUPERDONGLE...
Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)
Checking MCU&DSP TIMESTAMPS...
Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)
Checking CMLA KEYS...
Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
Failed to decode Security Section, Box Reported: Security Section Checksum Error (decryption fails?)
Analyze finished!

I have full RPL from phone.

Info and Selftest

Code:

All initialized - Ready to work
MCU Version	V ICPR72_09w20.12
MCU Date	10-09-09
Product		RM-356
Manufacturer	(c) Nokia
IMEI		358247031292456
Mastercode	2052733114
IMEI Spare	3A85420713924205
IMEI SV		3385420713924245F8000000
CNT		v 31.0.008_020_xxx_U01, 18-08-09, vanilla, RM356
PSN		MLI150912
Product Code	0582512
Basic Product Code	0584472
PSD		0000000000000000
LPSN		0
WLAN MAC	A87E333823A2
APE SW		V 31.0.101
APE Variant	V 31.0.101V 31.0.101 V 31.0.101 
APE Test		eno_version
APE HW		256
APE ADSP	256
RETU		16
TAHVO		22
AHNE		11
HW		1101
RFIC		17141715
DSP		ICPR72_09w19_1
Simlock Server	SIMLOCK SERVER
Simlock Key	2440700000000000
Simlock Profile	8000000000000006
Simlock Key Cnt	0
Simlock FBUS Cnt	0
Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
Selftests to proceed: 50
Passed		ST_TAHVOINT_TEST
Passed		ST_UEM_CBUS_IF_TEST
Passed		ST_EAR_DATA_LOOP_TEST
Passed		ST_SIM_CLK_LOOP_TEST
Passed		ST_SIM_IO_CTRL_LOOP_TEST
Passed		ST_SIM_LOCK_TEST
Passed		ST_SECURITY_TEST
Passed		ST_PWR_KEY_TEST
Passed		ST_CURRENT_CONS_TEST
Passed		ST_BACKUP_BATT_TEST
Passed		ST_RADIO_TEST
Passed		ST_HOOKINT_TEST
Passed		ST_BTEMP_TEST
Passed		ST_MBUS_RX_TX_LOOP_TEST
Passed		ST_AMB_LIGHT_SENSOR_TEST
Passed		ST_IIC_TEST
Passed		ST_EXT_DEVICE_TEST
Passed		ST_CDSP_SLEEPCLK_FREQ_TEST
Passed		ST_CDSP_SLEEPCLOCK_FREQ_TEST
Passed		ST_CDSP_RF_BB_IF_TEST
Passed		ST_CDSP_RF_SUPPLY_TEST
Passed		ST_CDSP_TX_IQ_TEST
Passed		ST_CDSP_TXC_DATA_TEST
Passed		ST_CDSP_PWR_DETECTOR_BIAS_TEST
Passed		ST_CDSP_RX_PLL_PHASE_LOCK_TEST
Passed		ST_CDSP_TX_PLL_PHASE_LOCK_TEST
Failed to make Selftests -> Phone is not responding for Selftest Request

SD Repair:

Code:

All initialized - Ready to work
SX4 Authorization / SD Repair Procedure Started....
"1AD0000AA84F8B5250177E8D97A5E94602F68593.C00013DF" Exists, That is good...
MCU Version	V ICPR72_09w20.12
MCU Date	10-09-09
Product		RM-356
Manufacturer	(c) Nokia
IMEI		358247031292456
Mastercode	2052733114
Reading Security Block...
Security block OK and saved to "RM-356_358247031292456_10032010_152645.SecurityBlock.PM"
Superdongle Key is probably CORRUPTED, Writing custom keys...
Received SD Keys from box, writing to phone...
Superdongle Key ACCEPTED OK !
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
WRITE NOW VIRGIN SX4 PM which CONTAINS PM FIELDS 1 and 309!

It is not writing
What should I do now?

cemalefendi · 03-10-2010, 16:59

just write pm (1 & 309)

harisa · 03-10-2010, 17:07

just use mxkey and take info.if its pm is protected.then wait for next update.

alkhaleejmobile · 03-10-2010, 17:27

when u write the pm, which error,,u got plz post the error,,

hugmax · 03-10-2010, 17:58

I forgot the pm writing ( I did it, but didnt post it)... but I flashed again but this time using v40 after I post this and everything is fine.

Quote:

just use mxkey and take info.if its pm is protected.then wait for next update.

this is cyclone section, mxkey´s sx4 is not working so you cannot repair SD... if I wanted to use mxkey (I have and I had) I would, but today I want to use cyclone.

alkhaleejmobile · 03-10-2010, 18:28

ok ,man ,now u happy, u can do sd, repair ,with cyclone,,,,don,t worry,,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7210c SD repair problem....	ASHRIFF	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	7	03-15-2010 10:06
5130 sd repair problem[FIXED,SERVER PROBLEM]	khokonhajigonj	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	10	02-28-2010 16:44
5800 SD repair	xim360	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	1	02-12-2010 08:05
5220xm sd repair !!! Problem !!!	raselopu	MT-BOX	3	01-27-2010 13:38
5800 v31 unlock an sd repair possible by new update???????	shahinahmed007	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	2	01-26-2010 07:50

03-10-2010, 16:59	#2 (permalink)
cemalefendi No Life Poster Join Date: Nov 2006 Location: turkey Posts: 768 Member: 384775 Status: Offline Sonork: 100.1605469 Thanks Meter: 159	just write pm (1 & 309)

03-10-2010, 17:07	#3 (permalink)
harisa Freak Poster Join Date: Sep 2004 Location: PAKISTAN Age: 52 Posts: 261 Member: 81821 Status: Offline Thanks Meter: 14	just use mxkey and take info.if its pm is protected.then wait for next update.

03-10-2010, 17:27	#4 (permalink)
alkhaleejmobile No Life Poster Join Date: Nov 2008 Location: saudi arabia Posts: 3,840 Member: 904809 Status: Offline Sonork: 100.1615464 Thanks Meter: 738	when u write the pm, which error,,u got plz post the error,,

03-10-2010, 18:28	#6 (permalink)
alkhaleejmobile No Life Poster Join Date: Nov 2008 Location: saudi arabia Posts: 3,840 Member: 904809 Status: Offline Sonork: 100.1615464 Thanks Meter: 738	ok ,man ,now u happy, u can do sd, repair ,with cyclone,,,,don,t worry,,