6600s unlock problem
 

6600S UNLOCK PROBLEM

BB5 Unlock Started...
MCU Version V 06.14
MCU Date 30-03-09
Product RM-414
Manufacturer (c) Nokia
IMEI 356383028654374
Mastercode 7743314444
Simlock Server SIMLOCK SERVER
Simlock Key 2341000000000000
Simlock Profile 8000000000000002
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23410F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1570010195E05850907BA483B0E1FBDA41940989
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_ROM_ID: 273F6D55DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x0001003F00008A21, AMD, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 10
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: A4B03CEB0AC8A915C4ECE9894BC44D6CE68F3AA4
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
BB5 Unlock Failed -> Unsupported Rootkey Hash, this is critical



ANYBODY CAN SAY WHERE THE FAULT

thes phone is Not supported now .
go here for more info .
http://forum.gsmhosting.com/vbb/showthread.php?t=799283

6600s is not supported by any box at the moment

Simply not supported with Cyclone Box at this moment.

Please take a look at supported phone list before try unknown model.

have you heard about Genie Universal ?

not supported yet...wait for update

Simply not supported with Cyclone Box at this moment.

Please wait for next updat