C1-01 local mode after flash..(solved) - GSM-Forum

Ram ALgo · 06-21-2011, 09:11

hello team.

i already flash phone w/ 3 different version,same product on navi.

phone still on local mode.

Code:

Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Proceeding with Recovery Mode...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Recovery Mode Failed, storing Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Backing up simlock...
[Nokia C1-01 USB Phonet]: Port opened OK!
MCU Version    V 03.35
MCU Date    02-12-10
Product        RM-607 (Nokia C1-01)
Manufacturer    (c) Nokia            
IMEI        357419041781023
Mastercode    5066372460
Simlock backup problem -> Failed to read PM 308, this is critical
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm607__03.30.mcusw (XGold2)...
Checking rm607__03.30.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
[Nokia C1-01 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.37_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00EC2400, Samsung, Size: 64MBytes
Processing "rm607__03.30.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4007FFFF...
Flashing at 0x40040000...
Flashed 262144 bytes OK
Erasing 0x40080000-0x4009FFFF...
Flashing at 0x40080000...
Flashed 131072 bytes OK
Erasing 0x400A0000-0x4019FFFF...
Flashing at 0x400A0000...
Flashed 1048576 bytes OK
Erasing 0x40400000-0x41BFFFFF...
Flashing at 0x40400000...
Flashed 24641536 bytes OK
Processing rm607__03.30.ppm_t (XGold2)...
Checking rm607__03.30.ppm_t...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_t.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41C00000-0x421FFFFF...
Flashing at 0x41C00000...
Flashed 4014668 bytes OK
Processing rm607__03.30.image_t_0596359 (XGold2)...
Checking rm607__03.30.image_t_0596359...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_t_0596359.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x42200000-0x43E5FFFF...
Flashing at 0x42200000...
Flashed 11927552 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia C1-01 USB Phonet]: Port opened OK!
[Nokia C1-01 USB Phonet]: Port opened OK!
[Nokia C1-01 USB Phonet]: Port opened OK!
[Nokia C1-01 USB Phonet]: Port opened OK!
[Nokia C1-01 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia C1-01 USB Phonet]: Port opened OK!
MCU Version    V 03.30
MCU Date    17-11-10
Product        RM-607 (Nokia C1-01)
Manufacturer    (c) Nokia            
IMEI        357419041781023
Mastercode    5066372460
IMEI Spare    3A75140914870102
IMEI SV        3375140914870102F4000000
PPM        V 03.30, 17-11-10, RM-607, (c) Nokia            , T
CNT        Content: t_0596359, V 03.30, 17-11-10, RM-607, (c) Nokia            
PSN        9038654AI
Product Code    0596359
Module Code    0204427
Basic Product Code    0585582
PSD        0000000000000000
LPSN        0
HW        2003
RFIC        96
LCD        TPO
BT        19b5-22012
Asic        11
HW Signature    356BC68C024D2236
Simlock Server    SIMLOCK SERVER
Simlock Key    0010100000000000
Simlock Profile    800000000003000B
Simlock Aux    000B0000
Simlock IMEI    00003574190417810200
Simlock Key Cnt    0
Simlock FBUS Cnt    0
Simlock [1,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [1,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [1,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [1,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [1,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [2,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [2,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [2,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [2,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [2,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [3,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [3,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [3,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [3,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [3,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [4,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [4,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [4,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [4,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [4,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [5,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [5,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [5,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [5,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [5,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [6,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [6,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [6,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [6,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [6,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [7,1]    State: OPENED    Type: MCC-MNC    Data: FFFFFF
Simlock [7,2]    State: OPENED    Type: GID    Data: FFFF
Simlock [7,3]    State: OPENED    Type: GID    Data: FFFF
Simlock [7,4]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Simlock [7,5]    State: OPENED    Type: IMSI    Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

SELFTEST

Quote:

Selftests to proceed: 23
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Failed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_LCD_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_LPRF_IF_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_BT_WAKEUP_TEST
Passed ST_HOOKINT_TEST
Passed ST_BTEMP_TEST
Passed ST_INTERNAL_ANTENNA_TEST
Passed ST_CHIPSET_API_RFPA_TEST
Passed ST_SLEEP_CLOCK_FREQ_TEST
Passed ST_KEYB_LINE_TEST
Failed ST_ADC_IF_TEST
Passed ST_MEMORY_CARD_IF_TEST
Passed ST_RF_PLL_TEST
Failed ST_CDSP_TX_RX_LOOP_BACK_TEST
Failed ST_FEM_CURRENT_TEST
Passed ST_SECURITY_FUSE_TEST
Selftests done, Tests total: 23, Tests passed: 19, Tests not passed: 4

here's my backup pm
RM-607_357419041781023_6212011_34735 PM.zip

please help.

juliusorbiso · 06-21-2011, 10:07

find the BSI line and remove dual resistor

Mr.3. · 06-21-2011, 10:19

what was problem before you flash?

Ram ALgo · 06-21-2011, 10:19

Quote:

Originally Posted by juliusorbiso

find the BSI line and remove dual resistor

phone is working,only asking sec. code.

sure its hardware?

please advise...

NADEEM GONDAL · 06-21-2011, 10:39

yes is Sure HW issue ..
do as said for those resistors else ..Check the battery terminals.

karwos · 06-21-2011, 13:04

Your phone have hardware problem.

Mr.3. · 06-22-2011, 14:30

try with same product code ..............

karwos · 06-23-2011, 13:49

Quote:

Originally Posted by Ram ALgo

phone is working,only asking sec. code.

sure its hardware?

please advise...

So Read security code and enter it.

Ram ALgo · 06-24-2011, 06:11

problem solved

i try with other box also same problem.

i do hardware also.

but in phoenix works perfect,phone working again.

anyway thanks for reply.

Mr.3. · 06-24-2011, 10:40

Quote:

Originally Posted by Ram ALgo

problem solved

i try with other box also same problem.

i do hardware also.

but in phoenix works perfect,phone working again.

anyway thanks for reply.

did you try with same product code with cyclone?

Ram ALgo · 06-24-2011, 12:04

Quote:

Originally Posted by Mr.3.

did you try with same product code with cyclone?

yes,it is written in post no. 1.

Quote:

i already flash phone w/ 3 different version,same product[code]on navi.

i try this firmware 3.30,3.35 and 4.40 with same product code.

again,here's the selftest after phone was ok.

Quote:

Selftests to proceed: 23
Passed ST_SIM_LOCK_TEST
Passed ST_SECURITY_TEST
Passed ST_PWR_KEY_TEST
Passed ST_CURRENT_CONS_TEST
Passed ST_SIM_CLK_LOOP_TEST
Passed ST_LCD_TEST
Passed ST_LPRF_AUDIO_LINES_TEST
Passed ST_LPRF_IF_TEST
Passed ST_KEYBOARD_STUCK_TEST
Passed ST_CAMERA_IF_TEST
Passed ST_BT_WAKEUP_TEST
Passed ST_HOOKINT_TEST
Passed ST_BTEMP_TEST
Passed ST_INTERNAL_ANTENNA_TEST
Passed ST_CHIPSET_API_RFPA_TEST
Passed ST_SLEEP_CLOCK_FREQ_TEST
Passed ST_KEYB_LINE_TEST
Passed ST_ADC_IF_TEST
Passed ST_MEMORY_CARD_IF_TEST
Passed ST_RF_PLL_TEST
Failed ST_CDSP_TX_RX_LOOP_BACK_TEST
Failed ST_FEM_CURRENT_TEST
Passed ST_SECURITY_FUSE_TEST
Selftests done, Tests total: 23, Tests passed: 21, Tests not passed: 2

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41

06-21-2011, 10:07	#2 (permalink)
juliusorbiso Freak Poster Join Date: Oct 2008 Age: 40 Posts: 458 Member: 884522 Status: Offline Sonork: 05261983 Thanks Meter: 87	find the BSI line and remove dual resistor

06-21-2011, 10:19	#3 (permalink)
Mr.3. No Life Poster Join Date: Feb 2009 Location: CMB/Ceylon Posts: 8,096 Member: 962029 Status: Offline Sonork: OEM Lock : ON Thanks Meter: 4,127	what was problem before you flash?

06-21-2011, 10:39	#5 (permalink)
NADEEM GONDAL No Life Poster Join Date: Aug 2007 Location: England Posts: 3,691 Member: 575900 Status: Offline Thanks Meter: 3,177	yes is Sure HW issue .. do as said for those resistors else ..Check the battery terminals.

06-21-2011, 13:04	#6 (permalink)
karwos No Life Poster Join Date: Feb 2005 Location: Poland Age: 34 Posts: 4,943 Member: 117496 Status: Offline Sonork: 100.83919 Thanks Meter: 22,689	Your phone have hardware problem.

06-22-2011, 14:30	#7 (permalink)
Mr.3. No Life Poster Join Date: Feb 2009 Location: CMB/Ceylon Posts: 8,096 Member: 962029 Status: Offline Sonork: OEM Lock : ON Thanks Meter: 4,127	try with same product code ..............

06-24-2011, 06:11	#9 (permalink)
Ram ALgo Freak Poster Join Date: Jul 2010 Posts: 110 Member: 1341521 Status: Offline Thanks Meter: 37	problem solved i try with other box also same problem. i do hardware also. but in phoenix works perfect,phone working again. anyway thanks for reply.