[ modified ] my new cylcone

[RNC_EBM]

Originally Posted by renegade

Hehe, nice work RNC_EBM...
And you could also build a TMA adapter inside your box using the rear 9v connector (since VPP is not needed) so you can give extra power for N95 8gb, etc.
This will eliminate the wires from an external TMA, which can cause problems sometimes.



B.R.
Renegade

NO NEED TMA COZ MY CABLE [ Universal Multi PRO 3 ] IS POWERFUL, NO NEED EXTERNAL SUPPLY


br

[RNC_EBM]

HERE'S MY UNIVERSAL PIN ADAPTER




br

[Swazi_Gsm]

good work man keep it up

[.:houssam:.]

hhhhhhhhhhh very brainy

[twentyonecell]

my box old pcb how to modif



thx

[ken_jez]

astig bossing.. ur da best

[RNC_EBM]

Originally Posted by twentyonecell

my box old pcb how to modif



thx

the SERVICE PORT HAS 10 PINS.

= u need 1P2T slide switch ( 3 terminal )

1 2 3

1 - goes to PIN 3 of the SERVICE PORT
2 - goes to PIN 9 of the SERVICE PORT
3 - this is DEFAULT CONNECTED to PIN 9


so FIND PIN 9 LINE in CUT IT, THE LINE YOU CUT DIRECTLY TO PIN 9 MUST BE SOLDER TO SLIDE SWITCH PIN 2, and the other CUTTED LINE GOES TO SLIDE SWITCH PIN 3.

so, when the SWITCH SLIDE:
1 & 2 - BB5 Connection
2 & 3 - DCT4 Connection


WARNING ! ! ! ! !

MAKE AT YOU OWN RISK . . . . . . .

REMEMBER, IF YOUR CYCLONE BOX DAMAGE COZ OF THIS MODIFICATION, DON'T ACCUSE ME, ACCUSE YOURSELF.


br



DO IT FOR THE FIRST TIME, FAILURE IS NOT AN OPTION

[RNC_EBM]

Originally Posted by oraj

nice idea for long lasting casing box need to find another casing for my cyclone.....

if you want to change the CASING, THE BEST CASING I CAN SAY IS
THE PHOENIX BLACK BOX 2 AKA PBB2, it is already painted with black & it has already SCREW.


br

[sharef]

Originally Posted by renegade

Hehe, nice work RNC_EBM...
And you could also build a TMA adapter inside your box using the rear 9v connector (since VPP is not needed) so you can give extra power for N95 8gb, etc.
This will eliminate the wires from an external TMA, which can cause problems sometimes.



B.R.
Renegade

hi renegade nis to see you i m very hapy to see you

[RNC_EBM]

>>> THE ORIGINAL <<<

>>> LIKE NO OTHER <<<

BEST REGARD

>>> DO IT FOR THE FIRST TIME, FAILURE IS NOT AN OPTION <<<

[Dbubblegumz]

sir..pleasse your have schematic for modif box this project.!

with picture l no see any more detail sircuit your make jumper........

1 & 2 - BB5 Connection
2 & 3 - DCT4 Connection


what make it simple.





thank

[RNC_EBM]

Originally Posted by Dbubblegumz

sir..pleasse your have schematic for modif box this project.!

with picture l no see any more detail sircuit your make jumper........

1 & 2 - BB5 Connection
2 & 3 - DCT4 Connection


what make it simple.





thank

with picture l no see any more detail sircuit your make jumper

SEE GREEN (1), RED (2) & BLUE (3)


what make it simple

YOU CAN'T FOLLOW PROCEDURE

NOTE:

IF you CAN'T follow procedure THEN IT'S NOT SIMPLE, BUT IF YOU CAN THEN IT'S SIMPLE


br

[RNC_EBM]

Originally Posted by Dbubblegumz

sir..pleasse your have schematic for modif box this project.!

with picture l no see any more detail sircuit your make jumper........

1 & 2 - BB5 Connection
2 & 3 - DCT4 Connection


what make it simple.





thank

i forgot, I DON'T HAVE ANY SCHEMATIC.

BUT IF YOU CAN READ CIRCUIT, YOU CAN MAKE SCHEMATIC, BUT I ONLY READ & MAKE MODIFICATION, THAT'S ALL.


br

[Dbubblegumz]

Originally Posted by RNC_EBM

i forgot, I DON'T HAVE ANY SCHEMATIC.

BUT IF YOU CAN READ CIRCUIT, YOU CAN MAKE SCHEMATIC, BUT I ONLY READ & MAKE MODIFICATION, THAT'S ALL.


br

no problems......l am should try.

and I would tell you.if I be solved........




thank

[ayhen42]

i love this word

MAKE AT YOU OWN RISK . . . . . . .

REMEMBER, IF YOUR CYCLONE BOX DAMAGE COZ OF THIS MODIFICATION, DON'T ACCUSE ME, ACCUSE YOURSELF.

you are great sir rnc_ebm
sir did you have full schematic hihihiihi about your modification