help needed.k800 gone dead by bad flasing - GSM-Forum

RAND CELLULAR · 09-04-2007, 16:25

i am trying to recover a dead k800....plz help...here is the post...

System diagnostics passed.
Version 12.00 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...

[ --- Detach Phone --- ]
Terminating threads...
Terminating threads...
All threads terminated.
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Primary certificate not found.
Phone CID: 52
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "K800i_CXC1250211_Vodafone_R1CE001_Red52.ck8sw "
Waiting for flash file to load...
Preparing to program flash...
Programming flash...

when i try flashing it says
rror flashing block at address: 0x44140000
Script error: Flash error [12.00.78]

hicvb7 · 09-04-2007, 16:48

attach phone
unlock rsa
flash main
flash fs
customise
restore firmware

***THE CLASH*** · 09-04-2007, 17:00

its a cid 52 there is no unlock RSA for this..
Try a different flash file and be sure your phones battery is fully charged..

Nurettin Duman · 09-04-2007, 17:08

Quote:

Originally Posted by THE CLASH

its a cid 52 there is no unlock RSA for this..
Try a different flash file and be sure your phones battery is fully charged..

yes 1000%ok
phones battery is fully charged..

RAND CELLULAR · 09-04-2007, 17:09

phone battery is charged....tried flashing with 2 cid 52 flash files....still no go

Nurettin Duman · 09-04-2007, 17:13

Eprom raparier buton

RAND CELLULAR · 09-04-2007, 18:03

failed to repaie erom...

gprsman · 09-04-2007, 18:25

Quote:

Originally Posted by RAND CELLULAR

i am trying to recover a dead k800....plz help...here is the post...

System diagnostics passed.
Version 12.00 ready!
Do NOT connect the phone at this time!

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...

[ --- Detach Phone --- ]
Terminating threads...
Terminating threads...
All threads terminated.
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via SEMC DCU-60...
Connect the phone while holding its C button!
USB connection established.
Baseband chip ID: 0x9900
Protocol version: 3.1
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 0s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49
Primary certificate not found.
Phone CID: 52
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "K800i_CXC1250211_Vodafone_R1CE001_Red52.ck8sw "
Waiting for flash file to load...
Preparing to program flash...
Programming flash...

when i try flashing it says
rror flashing block at address: 0x44140000
Script error: Flash error [12.00.78]

Test other firmware

luzer · 09-04-2007, 22:46

"Error flashing block at address:" - why?

gprsman · 09-05-2007, 10:51

Quote:

Originally Posted by luzer

"Error flashing block at address:" - why?

Very important thanks luzer

db2020 no tp ... guide/faq please cruiser team update for db2020 thanks.

vanbasten · 09-05-2007, 16:23

after attach phone, only have flash tab, there is no security tab. in my case how to unlock RSA?
thx
BR
Vanbasten

badillo · 09-06-2007, 04:48

Quote:

Originally Posted by vanbasten

after attach phone, only have flash tab, there is no security tab. in my case how to unlock RSA?
thx
BR
Vanbasten

you can`t unlock RSA in DB2020 CID52

09-04-2007, 16:25	#1 (permalink)
RAND CELLULAR Freak Poster Join Date: Mar 2006 Posts: 216 Member: 238559 Status: Offline Thanks: 2 Thanked 2 Times in 1 Post	help needed.k800 gone dead by bad flasing i am trying to recover a dead k800....plz help...here is the post... System diagnostics passed. Version 12.00 ready! Do NOT connect the phone at this time! [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x9900 Protocol version: 3.1 Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_... [ --- Detach Phone --- ] Terminating threads... Terminating threads... All threads terminated. All threads terminated. [ --- Attach to Phone --- ] Connecting via SEMC DCU-60... Connect the phone while holding its C button! USB connection established. Baseband chip ID: 0x9900 Protocol version: 3.1 Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 0s Initializing phone hardware... Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_... Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 49 Primary certificate not found. Phone CID: 52 RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Flash Main Firmware --- ] Flash file: "K800i_CXC1250211_Vodafone_R1CE001_Red52.ck8sw " Waiting for flash file to load... Preparing to program flash... Programming flash... when i try flashing it says rror flashing block at address: 0x44140000 Script error: Flash error [12.00.78]

09-05-2007, 16:23	#11 (permalink)
vanbasten Junior Member Join Date: Apr 2006 Posts: 38 Member: 266574 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	how to unlock RSA after attach phone, only have flash tab, there is no security tab. in my case how to unlock RSA? thx BR Vanbasten

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
URGENT HELP NEEDED W810i GONE HAYWIRE	Auto1	Cruiser Suite	44	11-20-2006 18:13
cx65 dead by bad testpoint????? URGNT	Z-RocK	S-Gold Based Phones	3	08-29-2006 00:05
E 365 Dead By Bad Unlock	PILONCILLO	ODM (Original Design Manufacturing)	1	08-28-2004 08:43
help me !!! siemens a50 dead after bad flash	dragoss	Phone Unlocking Codes & Maps	4	06-29-2003 20:59
REPAIR DEAD GD 90 DEAD BYE BAD FLASING	coolgsm2000	Panasonic	2	11-25-2001 23:22

09-04-2007, 16:48	#2 (permalink)
hicvb7 No Life Poster Join Date: Apr 2007 Location: 18/9 Posts: 743 Member: 483440 Status: Offline Sonork: 1577958 Thanks: 257 Thanked 130 Times in 72 Posts	attach phone unlock rsa flash main flash fs customise restore firmware

09-04-2007, 17:00	#3 (permalink)
*THE CLASH* Super Moderator Join Date: Aug 2005 Location: UK.. Age: 47 Posts: 4,415 Member: 173077 Status: Offline Sonork: 100.1594293 Thanks: 0 Thanked 769 Times in 397 Posts	its a cid 52 there is no unlock RSA for this.. Try a different flash file and be sure your phones battery is fully charged..

09-04-2007, 17:09	#5 (permalink)
RAND CELLULAR Freak Poster Join Date: Mar 2006 Posts: 216 Member: 238559 Status: Offline Thanks: 2 Thanked 2 Times in 1 Post	phone battery is charged....tried flashing with 2 cid 52 flash files....still no go

09-04-2007, 17:13	#6 (permalink)
Nurettin Duman No Life Poster Join Date: Feb 2005 Location: Turkiye :GsmdunyasıTeam® Age: 42 Posts: 2,776 Member: 115596 Status: Offline Thanks: 382 Thanked 1,082 Times in 373 Posts	Eprom raparier buton

09-04-2007, 18:03	#7 (permalink)
RAND CELLULAR Freak Poster Join Date: Mar 2006 Posts: 216 Member: 238559 Status: Offline Thanks: 2 Thanked 2 Times in 1 Post	failed to repaie erom...

09-04-2007, 22:46	#9 (permalink)
luzer No Life Poster Join Date: Nov 2003 Posts: 2,344 Member: 44659 Status: Offline Thanks: 15 Thanked 250 Times in 148 Posts	"Error flashing block at address:" - why?