Problems detecting UC-10 universal cable and cruiser - GSM-Forum

ronzinio · 06-14-2006, 07:57

I am having some problems connecting my w800 via UC-10 universal cable. If I have to disconnect the cable from my laptop for some reason the cable won't autodetect.

Temporarily I am using a 9v battery while I await my power supply which is hooked upto the cable. I have flashed about 3-4 phones using this battery.

Is there like a guaranteed 100% way of always detecting this cable?

The driver are installed properly and are working.

My method is:

1. Plug in dongle
2. Plug in cable with battery connected (this is the point where the cable should be detected within the cruiser program right?
3. Connect to phone without the fully-charged battery (when I connect the cable with the phones battery already in the phone. The phone would start to charge or start to vibrate constantly.)
4. RESCAN PORTS in the cruiser menu. (but still the cable is not automatically detect)

What am I doing wrong?

pf0813 · 06-15-2006, 12:05

http://www.mycruiser.org/support.php?dir=/Software_GSM download corect driver

06-14-2006, 07:57	#1 (permalink)
ronzinio Insane Poster Join Date: Jul 2005 Location: London, UK Age: 38 Posts: 91 Member: 164504 Status: Offline Thanks Meter: 17	Problems detecting UC-10 universal cable and cruiser I am having some problems connecting my w800 via UC-10 universal cable. If I have to disconnect the cable from my laptop for some reason the cable won't autodetect. Temporarily I am using a 9v battery while I await my power supply which is hooked upto the cable. I have flashed about 3-4 phones using this battery. Is there like a guaranteed 100% way of always detecting this cable? The driver are installed properly and are working. My method is: 1. Plug in dongle 2. Plug in cable with battery connected (this is the point where the cable should be detected within the cruiser program right? 3. Connect to phone without the fully-charged battery (when I connect the cable with the phones battery already in the phone. The phone would start to charge or start to vibrate constantly.) 4. RESCAN PORTS in the cruiser menu. (but still the cable is not automatically detect) What am I doing wrong?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
schematic cable UC-10 Universal Cable	pepenk	Cruiser Suite	4	10-16-2014 20:09
Problem using uc-10	badillo	Cruiser Suite	3	03-17-2007 21:57
"The actual cable type is: UC-10 Universal Cable - Refusing to continue..."	James_S	Cruiser Suite	1	02-11-2006 23:52
Need drivers for UC-10 USB cable	msa	Cruiser Suite	21	07-15-2005 00:55

06-15-2006, 12:05	#2 (permalink)
pf0813 Freak Poster Join Date: Feb 2005 Age: 42 Posts: 104 Member: 121575 Status: Offline Thanks Meter: 1	http://www.mycruiser.org/support.php?dir=/Software_GSM download corect driver