***ufc4 updates & support section *** - Page 13 - GSM-Forum

taleb_amine8 · 11-09-2011, 07:36

Thanks yoooooooooooooooooooooooooooooooo

pogs1962 · 11-14-2011, 02:58

sir need all pin-out dct4 and bb5 for ufc4 thanks for help

Gsm-extreme · 11-14-2011, 07:15

Quote:

Originally Posted by pogs1962

sir need all pin-out dct4 and bb5 for ufc4 thanks for help

UFC PINOUT
...............

gsmhuda · 12-01-2011, 15:06

need ufc4 usb driver

Gsm-extreme · 12-01-2011, 16:54

Quote:

Originally Posted by gsmhuda

need ufc4 usb driver

Why you need UFC 4 Driver? or you need Prolific Cable Driver?
Dits GSM Finder

shomyx · 12-30-2011, 07:55

I post this because I'm very afraid that can damage my MT box, I post this on MT box supp forum and they say it probably is some defect on UFC4.
Please can you perform check what is cause of this problem and can I fixed I used UFC4 V2 (connecting cable with switch JAF/ATF MT CYCLONE) on big number of phones and did not noticed this warning till few days ago!!!

This is log from reading phone:
Phone is in: Local mode
Model: RM-588
V ICPR72_10w21/26-05-10/RM-588 (c) Nokia
Production serial number xxxxxxxxx
Product code xxxxxxxx
Module code xxxxxxxx
Basic production code xxxxxxx
Flash code
Order number
Long production SN 0
MCU SW V ICPR72_10w21/26-05-10/RM-588/(c) Nokia
HW 0512
PCI
RFIC 17141716
DSP ICPR72_10w16p1
APE SW Core V 21.0.004
APE Variant V 21.0.004V 21.0.004 21.0.004.471.01
APE Test rm588_ENO_x_09wk43v0.050
Retu 16
Tahvo 22
APE HW 256
APE ADSP SW 256
Content Pack v 001_000/11-05-10/vanilla/RM588
IMEI: xxxxxxxxxxxxxxxxxx
VBat is 7.42V

Vpp pin has 8.10V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
VBat Off
VBat On
VBat is 7.42V

Vpp pin has 7.99V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0

This is log from connected only UFC4 without USB external power supply connected:
VBat is 3.99V

Vpp pin has 3.94V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
VBat Off
VBat On
VBat is 4.00V

Vpp pin has 3.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

This is log with USB external power supply connected on UFC4:
VBat is 5.03V

Vpp pin has 4.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
VBat Off
VBat On
VBat is 5.03V

Vpp pin has 4.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

please help

Gsm-extreme · 12-31-2011, 05:26

Quote:

Originally Posted by shomyx

I post this because I'm very afraid that can damage my MT box, I post this on MT box supp forum and they say it probably is some defect on UFC4.
Please can you perform check what is cause of this problem and can I fixed I used UFC4 V2 (connecting cable with switch JAF/ATF MT CYCLONE) on big number of phones and did not noticed this warning till few days ago!!!

This is log from reading phone:
Phone is in: Local mode
Model: RM-588
V ICPR72_10w21/26-05-10/RM-588 (c) Nokia
Production serial number xxxxxxxxx
Product code xxxxxxxx
Module code xxxxxxxx
Basic production code xxxxxxx
Flash code
Order number
Long production SN 0
MCU SW V ICPR72_10w21/26-05-10/RM-588/(c) Nokia
HW 0512
PCI
RFIC 17141716
DSP ICPR72_10w16p1
APE SW Core V 21.0.004
APE Variant V 21.0.004V 21.0.004 21.0.004.471.01
APE Test rm588_ENO_x_09wk43v0.050
Retu 16
Tahvo 22
APE HW 256
APE ADSP SW 256
Content Pack v 001_000/11-05-10/vanilla/RM588
IMEI: xxxxxxxxxxxxxxxxxx
VBat is 7.42V

Vpp pin has 8.10V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
VBat Off
VBat On
VBat is 7.42V

Vpp pin has 7.99V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0

This is log from connected only UFC4 without USB external power supply connected:
VBat is 3.99V

Vpp pin has 3.94V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
VBat Off
VBat On
VBat is 4.00V

Vpp pin has 3.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

This is log with USB external power supply connected on UFC4:
VBat is 5.03V

Vpp pin has 4.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
VBat Off
VBat On
VBat is 5.03V

Vpp pin has 4.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

please help

How to Use DITS UFC4
UFC4 User Manual v1.2 – English

shomyx · 01-03-2012, 13:22

I work long time with ufc4 jig, I'm not so green with that issue!!! Can you confirm this pinout of cable for ufc4 middle switch on mt box for ufc4 module BLT OCT-26-2010 VER:3.0 or there need to be diferences and where????

FROM MT BOX---TO UFC4 MODULE
1-----------------6--VBAT
2-----------------7
3-----------------5--GND
4-----------------10
5-----------------8
6-----------------9
7-----------------3
8-NOT CONNECT--*
9-----------------4
10-NOT CONNECT-*
*-NOT CONNECT--1--BSI

this is what I read with multimeter zero ohm

MY MT BOX is ok tested with uf4 v1 (two main cable) from other user ---no shortcut to IO issue. I have blueprint of mt-box main cable for ufc v1 and compared wit this upper pinout there is some differences:
QUOTE BLUEPRINT

1--YELLOW
2--RED
3--7
4--9
5--3
6--1
7--2
8--5
9--6
10-4

dharyadi · 01-03-2012, 14:48

please update DITS-UFC4 Slave JIGS Compactibility
i need pinout for c2-00

DITS · 04-25-2012, 10:08

friendstelecom · 04-26-2012, 10:28

pls make pdf file...

GsmExpertz.Clt · 04-26-2012, 12:01

please provide xlsheet or pdf

thanks

DeyviBox · 05-21-2012, 01:54

nokia c1-01 schematics

rm-608

.:iTRi:. · 06-04-2012, 18:31

x1-01 NOKIA 100 101 = JIG DCT4I

chorcha89 · 11-15-2012, 19:20

I have JTAG Adapter with 26 UFC4 I connect and I do not recognize any phone, I work with cyclone

12-30-2011, 07:55	#186 (permalink)
shomyx Freak Poster Join Date: Jun 2009 Posts: 232 Member: 1062029 Status: Offline Thanks: 40 Thanked 40 Times in 22 Posts	about shotcuton IO Pin ob MT box I post this because I'm very afraid that can damage my MT box, I post this on MT box supp forum and they say it probably is some defect on UFC4. Please can you perform check what is cause of this problem and can I fixed I used UFC4 V2 (connecting cable with switch JAF/ATF MT CYCLONE) on big number of phones and did not noticed this warning till few days ago!!! This is log from reading phone: Phone is in: Local mode Model: RM-588 V ICPR72_10w21/26-05-10/RM-588 (c) Nokia Production serial number xxxxxxxxx Product code xxxxxxxx Module code xxxxxxxx Basic production code xxxxxxx Flash code Order number Long production SN 0 MCU SW V ICPR72_10w21/26-05-10/RM-588/(c) Nokia HW 0512 PCI RFIC 17141716 DSP ICPR72_10w16p1 APE SW Core V 21.0.004 APE Variant V 21.0.004V 21.0.004 21.0.004.471.01 APE Test rm588_ENO_x_09wk43v0.050 Retu 16 Tahvo 22 APE HW 256 APE ADSP SW 256 Content Pack v 001_000/11-05-10/vanilla/RM588 IMEI: xxxxxxxxxxxxxxxxxx VBat is 7.42V Vpp pin has 8.10V, Active Shortcut to IO Pin Pins: Mbus 1, Box Tx 1, Box Rx 1, Bsi 0 VBat Off VBat On VBat is 7.42V Vpp pin has 7.99V, Active Shortcut to IO Pin Pins: Mbus 1, Box Tx 1, Box Rx 1, Bsi 0 This is log from connected only UFC4 without USB external power supply connected: VBat is 3.99V Vpp pin has 3.94V, Active Shortcut to IO Pin Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 VBat Off VBat On VBat is 4.00V Vpp pin has 3.96V, Active Shortcut to IO Pin Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 This is log with USB external power supply connected on UFC4: VBat is 5.03V Vpp pin has 4.96V, Active Shortcut to IO Pin Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 VBat Off VBat On VBat is 5.03V Vpp pin has 4.96V, Active Shortcut to IO Pin Pins: Mbus 1, Box Tx 1, Box Rx 0, Bsi 0 please help

01-03-2012, 13:22	#188 (permalink)
shomyx Freak Poster Join Date: Jun 2009 Posts: 232 Member: 1062029 Status: Offline Thanks: 40 Thanked 40 Times in 22 Posts	I work long time with ufc4 jig, I'm not so green with that issue!!! Can you confirm this pinout of cable for ufc4 middle switch on mt box for ufc4 module BLT OCT-26-2010 VER:3.0 or there need to be diferences and where???? FROM MT BOX---TO UFC4 MODULE 1-----------------6--VBAT 2-----------------7 3-----------------5--GND 4-----------------10 5-----------------8 6-----------------9 7-----------------3 8-NOT CONNECT--* 9-----------------4 10-NOT CONNECT-* -NOT CONNECT--1--BSI this is what I read with multimeter zero ohm MY MT BOX is ok tested with uf4 v1 (two main cable) from other user ---no shortcut to IO issue. I have blueprint of mt-box main cable for ufc v1 and compared wit this upper pinout there is some differences: QUOTE BLUEPRINT 1--YELLOW 2--RED 3--7 4--9 5--3 6--1 7--2 8--5 9--6 10-4 Last edited by shomyx; 01-03-2012 at 13:30.*

04-25-2012, 10:08	#190 (permalink)
DITS No Life Poster Join Date: Sep 2009 Location: Shenzhen Posts: 1,397 Member: 1123681 Status: Offline Sonork: 100.1000 Thanks: 678 Thanked 6,870 Times in 804 Posts	Ufc4 Jig compbatibilty list updated 25-4-2012

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Phone Stuff for FREE & KEy-GEn For Logo Editor !	BoNtEk - ThA WtC MeMbA	Nokia Multimedia	10	03-11-2013 15:27
Upload & Download Eprom	Lousangeles	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	09-16-2011 13:43
About 5110 & Winlock	GByte9	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	11-08-1999 02:54
Nokia 5110 & 6110 Schemics	MyKy	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	08-06-1999 08:36

11-09-2011, 07:36	#181 (permalink)
taleb_amine8 Freak Poster Join Date: Jan 2006 Location: ALGERIA Age: 30 Posts: 368 Member: 223552 Status: Offline Sonork: 100.1615627 Thanks: 113 Thanked 51 Times in 36 Posts	Thanks yoooooooooooooooooooooooooooooooo

11-14-2011, 02:58	#182 (permalink)
pogs1962 Freak Poster Join Date: Feb 2008 Posts: 99 Member: 703094 Status: Offline Thanks: 249 Thanked 16 Times in 11 Posts	sir need all pin-out dct4 and bb5 for ufc4 thanks for help

12-01-2011, 15:06	#184 (permalink)
gsmhuda Freak Poster Join Date: Nov 2010 Location: cox's bazar bangladesh Posts: 153 Member: 1453066 Status: Offline Thanks: 7 Thanked 23 Times in 14 Posts	need ufc4 usb driver

01-03-2012, 14:48	#189 (permalink)
dharyadi No Life Poster Join Date: Oct 2006 Age: 34 Posts: 615 Member: 369678 Status: Offline Thanks: 82 Thanked 184 Times in 91 Posts	please update DITS-UFC4 Slave JIGS Compactibility i need pinout for c2-00

04-26-2012, 10:28	#191 (permalink)
friendstelecom Freak Poster Join Date: Aug 2007 Posts: 169 Member: 564792 Status: Offline Thanks: 29 Thanked 9 Times in 8 Posts	pls make pdf file...

04-26-2012, 12:01	#192 (permalink)
GsmExpertz.Clt No Life Poster Join Date: Jul 2004 Location: GsmExpertz Clt Kerala India Age: 35 Posts: 536 Member: 74036 Status: Offline Sonork: 100.1601291 Thanks: 47 Thanked 28 Times in 23 Posts	please provide xlsheet or pdf thanks

05-21-2012, 01:54	#193 (permalink)
DeyviBox Freak Poster Join Date: Aug 2011 Posts: 122 Member: 1637268 Status: Offline Sonork: 1606882 Thanks: 177 Thanked 9 Times in 8 Posts	nokia c1-01 schematics rm-608

06-04-2012, 18:31	#194 (permalink)
.:iTRi:. No Life Poster Join Date: Mar 2006 Location: .:iTRi:. Posts: 1,072 Member: 240068 Status: Online Thanks: 248 Thanked 161 Times in 101 Posts	x1-01 NOKIA 100 101 = JIG DCT4I

11-15-2012, 19:20	#195 (permalink)
chorcha89 Crazy Poster Join Date: Jul 2011 Posts: 54 Member: 1623058 Status: Offline Sonork: chorcha89 Thanks: 36 Thanked 0 Times in 0 Posts	I have JTAG Adapter with 26 UFC4 I connect and I do not recognize any phone, I work with cyclone