[shomyx]

I post this because I'm very afraid that can damage my MT box, I post this on MT box supp forum and they say it probably is some defect on UFC4.
Please can you perform check what is cause of this problem and can I fixed I used UFC4 V2 (connecting cable with switch JAF/ATF MT CYCLONE) on big number of phones and did not noticed this warning till few days ago!!!

This is log from reading phone:
Phone is in: Local mode
Model: RM-588
V ICPR72_10w21/26-05-10/RM-588 (c) Nokia
Production serial number xxxxxxxxx
Product code xxxxxxxx
Module code xxxxxxxx
Basic production code xxxxxxx
Flash code
Order number
Long production SN 0
MCU SW V ICPR72_10w21/26-05-10/RM-588/(c) Nokia
HW 0512
PCI
RFIC 17141716
DSP ICPR72_10w16p1
APE SW Core V 21.0.004
APE Variant V 21.0.004V 21.0.004 21.0.004.471.01
APE Test rm588_ENO_x_09wk43v0.050
Retu 16
Tahvo 22
APE HW 256
APE ADSP SW 256
Content Pack v 001_000/11-05-10/vanilla/RM588
IMEI: xxxxxxxxxxxxxxxxxx
VBat is 7.42V

Vpp pin has 8.10V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
VBat Off
VBat On
VBat is 7.42V

Vpp pin has 7.99V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0

This is log from connected only UFC4 without USB external power supply connected:
VBat is 3.99V

Vpp pin has 3.94V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
VBat Off
VBat On
VBat is 4.00V

Vpp pin has 3.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0


This is log with USB external power supply connected on UFC4:
VBat is 5.03V

Vpp pin has 4.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
VBat Off
VBat On
VBat is 5.03V

Vpp pin has 4.96V, Active
Shortcut to IO Pin
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0

please help