N82-1 rm-313 white screen after flashing !!

[ojail]

Nokia N82-1 rm-313 after a successful flash it did not boot and stuck on a black screen, so what I did was:

• Backup : ((RPL + PP +PM))
• did a full erase and re-flashed the phone again
• restored the: ((RPL + PP + PM))
• repair super dongle
• repair simlock SL1 and SL2
• and repaired the SX4

but it's stuck on a white screen ...
please help
this is my scan:

================================================
             Basic Phone Information             
================================================
MCU Version: V 06wk41v51 28-01-08 RM-313 (c) Nokia
IMEI Plain : 358984013230134
IMEI Spare : A358984013230130
IMEI SV    : 33589840132301304F
Phone Model: Nokia N82
Category   : Classic Phone
Phone Type : RM-313
================================================
            Extended Phone Information           
================================================
Product Serial Number: 0
Long Production SN   : 0
MCU SW Version       : V 06wk41v51 28-01-08 RM-313 (c) Nokia
RFIC Version         : 17141715
DSP Version          : mc_3131_ICPR62_2008w04
Content              : V 019 09-12-08 u01 RM-313
APE BT Version       : HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
Content Pack Version : V 019 09-12-08 u01 RM-313
AHNE Version         : 11
APE SW Core Version  : 35.0.002
APE Test Version     : rm313_eno_2008wk06updv0.030
RETU Version         : 15
TAHVO Version        : 22
APE HW Version       : 1
APE ADSP SW Version  : 256
Wireless LAN ID      : 00:1D:FD:7E:FF:C4
Bluetooth ID         : 00:1D:FD:8B:34:C4
CS Type              : GSM850, GSM900, GSM1800, GSM1900, WCDMA I
================================================
               Simlock Information               
================================================
CONFIG KEY    :  0000000000000000
PROVIDER KEY  :  2440700000000000
NETWORK NAME  :  Nokia Default;Finland
LOCK COUNTERS :  KEYPRESS 0/3,  FBUS 0/10
SIMLOCK TABLE :
   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE :  Not Locked
SIMLOCK_TYPE             : PA_SL2
SIMLOCK_TEST             : PASSED
SECURITY_TEST           : PASSED
SECURITY_CODE          : 12345
PHONE_MODE              : TEST
DCC ID                          : NOT USED
 
======================================================
Selected VPL File:
RM313_0560981_35.0.002_001.vpl
======================================================
Variant Details     : RM-313 TURKEY
Software Version : 35.0.002
Product Type       : RM-313
Product Code      : 0560981
Variant Version    : 001

[unlock.mk]

If there is no LOCAL MODE or TEST MODE display on screen, when you working on it, or when the phone is attached on box, then, try to change display to see if your N82 lcd display is ok. I would do the same thing first

[gsm_new1]

@ojail

bro ur set is ok with software. but try to flash with downgrade version.

erase ur set and flash with 31.0.16 version and then restore the rpl and pm.

and repair the s.d and check ur set. f still same problem then its will be the hardware problem.

bro

[ojail]

Originally Posted by unlock.mk

If there is no LOCAL MODE or TEST MODE display on screen, when you working on it, or when the phone is attached on box, then, try to change display to see if your N82 lcd display is ok. I would do the same thing first

while reseting user data the screen shows Test Mode
and the screen was OK before the first flash

[m.aminhaqjoo]

Brother post here the flash log and the screenshot of your ATF soft we should know that which file you flashed with.

[..::Angel::..]

@ojail

Use this solution by AdvanceBox: http://forum.gsmhosting.com/vbb/7746277-post16.html

BR