Who have issue with "Autoupdate", Update fw, Server busy itc.. Loock here

[unmonje]

Originally Posted by allumts

This solution is only for Atf seen in "USB Serial Converter A to B" it's .ept, (EEPROM) File faulting and can repair with Mprogr.

This isn't you case, you have Firmware Update issue!!!!

NOTE: Try to Uninstall with "Revo Unistaller" ATF SW and all it's component installed, DELETE TOTALLY "ATF FOLDER" then launch the Setup.exe 12.60>Close Av and Fw first>Update Fw, (not restore Box), if get error, Add Line in HOSTS line.

IMPORTANT: Make Sure you are using "Primary Directory" like C:// using Primary Port of you PC w/o any HUB or other Running BOX....

POST Screenshoot of you "Device Manager" open with showing USB port


You Error is very Strange: 2010-00000y

Try in this mode, if not solve i see how can help you in Win 7 32 Bit machine...

BR

i stay in 32 bit win 7 machine i do:
-Uninstall with "Revo Unistaller"
-delete atf folder in root directory in c://
-reboot pc
-install v12.60
-reboot pc
-connect box and install drivers manually from C:\AdvanceBox Turbo Flasher\Driver\ATF_NEW_DRIVERS (i use ftdibus.inf)
-open v12.60 and install drivers shenzhen
-reboot pc
-update firmware -> (query result - not found)

machine whitout AV - use rear ports directly from mother board

[allumts]

Ok, drivers seem all ok, only need of see directly what is wrong....not for last this Box can have issue....but want to do one try...(only for this time, clear for all), contact me in my Skype, (loock my profile), sending Add request with the reason ...otherwise Not accept you...too much spammers ask of to be added...

BR

[allumts]

Never can working, ATF NET 49 credits was Faulting....so when have same problem above after tryed my procedure and tryed in all mode, all you know of ceck you "ATF NET" Credits, must be 49 credits showing for use and Update Firmware!!!!

-update firmware -> (query result - not found)

Buy ATF NET activaction, solved!!!!

Br
allumts

[Fakolujo]

Thanks a lot my box with error connection is okay after almost a year of waiting

[allumts]

Originally Posted by Fakolujo

Thanks a lot my box with error connection is okay after almost a year of waiting

So, is Full working this Easy procedure, Right?

Many user are waiting only answer of Support for Not read this easy procedure.... Good work @Fakolujo

Br

allumts

[karwanyhata]

hi please i have same issue this is my sn AA4F2C59

[allumts]

Originally Posted by karwanyhata

hi please i have same issue this is my sn AA4F2C59

Hello, why post this question when in First post i've posted Full Solution?

Threads Read from First post NOT from Last.

BR

[shameer86]

why atf support side flash files are not downloading??

[anasshe]

and what about this

================================================
Advance Turbo Flasher Found 
================================================

Driver Version : 00021216

Library Version : 00030211

Box Type : AdvanceBox Turbo

Box Firmware : LogiCore 11.0.10

Software Version : v12.67

AdvanceBox SN : E1C5F6309EFF65D39675AD7A

Box Status : NOT ACTIVATED

================================================
Please Activate your Box 
================================================

* Follow these Instructions 
1. Disconnect any phones connected to ATF Box 
2. Go to "Product Support Tab" 
3. Go to "Box Tools" Section 
4. Fill in the Required Information 
5. Click "Activate Box" button 

================================================
Box Successfully Initialized 
================================================

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done


i try restore firmware and update same thing



Your Box Distributor/Reseller has requested that your Box should be Disabled.
Please Contact your Box Distributor/Reseller and settle the Problem.

If you think you are getting this Message by Mistake, please visit ATF Support:
Advance-Box - GSM-Forum

[pausky]

Originally Posted by mctsofpr

Remove/Uninstall any older Version next Install Full v12.50 or v12.60

If you tried already to Update your FW and got Error Server Connection. Select The ATF Network First Icon on Top Left. If you read carefully to the Box on your Right Low Corner you see a Bar Button which Read "Add ATF Servers to Windows hosts File" Click on it. Close your ATF Software. Unplug and Replug your ATF and Reopen software try again FW Update. This is at the Easy Way To Go. If you want to be more on the Hard Way then go Manually as My Partner here already say how to edit hosts file in Windows. WARNING!! WARNING!! WARNING!!: Be sure no AntiVirus or Firewall is active while you update your ATF Module Firmware.

BRs,

mctsofpr

tnx for this... really useful

[allumts]

Originally Posted by anasshe

and what about this

I see is very Clear that you Reseller/Distributor have selled you one Atf WITHOUTH any Activaction or have Cheated you asking of Block you serial.

Can post here Name of this reseller????

IMPORTANT: When buy ATF also in trusted site like "Amazon", loock carefully what Model you are purchasing, old Big Atf Yellow coming W/O any Activaction, must need of buy "ATF NET" (49 credits), for Active this.

Atf Nitro/Light coming with ATF NET incluse

ATF GOLD coming with ATF NET and JTAG Active.

So, contact you reseller and ask for Refund or for "ATF NET" Activaction.

Br
allumts

[anasshe]

Originally Posted by allumts

I see is very Clear that you Reseller/Distributor have selled you one Atf WITHOUTH any Activaction or have Cheated you asking of Block you serial.

Can post here Name of this reseller????

IMPORTANT: When buy ATF also in trusted site like "Amazon", loock carefully what Model you are purchasing, old Big Atf Yellow coming W/O any Activaction, must need of buy "ATF NET" (49 credits), for Active this.

Atf Nitro/Light coming with ATF NET incluse

ATF GOLD coming with ATF NET and JTAG Active.

So, contact you reseller and ask for Refund or for "ATF NET" Activaction.

Br
allumts

i buy it from china

Reseller: gsm-surces

it was working well

[allumts]

Originally Posted by anasshe

i buy it from china

Reseller: gsm-surces

it was working well

I cannot know what have done you reseller, but if first was working good, it's very clear:

Your Box Distributor/Reseller has requested that your Box should be Disabled.
Please Contact your Box Distributor/Reseller and settle the Problem.

So contact you reseller, reason can be many, like money Not paid to Atf, or other things...contact this reseller.

[anasshe]

Originally Posted by allumts

I cannot know what have done you reseller, but if first was working good, it's very clear:


So contact you reseller, reason can be many, like money Not paid to Atf, or other things...contact this reseller.

i m from syria and it was working after last update it stop

[karwanyhata]

Originally Posted by pausky

tnx for this... really useful

that was very good thanks alot