Samsung Galaxy TAB P1000 Dead Boot Done w/ RIFF - Page 3 - GSM-Forum

Nurettin Duman · 03-31-2011, 14:39

Samsung Galaxy TAB P1000 Dead Boot Done w/ RIFF-ok-ok

P1_20100909.pit
GT-P1000-CSC-TNLJK1.tar.md5
MODEM_P1000XXJID.tar.md5
P1000BOJJ3-REV03-ALL-CL664187.tar.md5
Odin3 v1.7

c8387811 · 04-01-2011, 07:05

I repair P1000 dead boot erro:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung Galaxy Tab]
Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...
ERROR: Failed due to multiple communication errors. Terminating at 0x00000000
why?

jomafi · 04-01-2011, 07:50

In Case of first picture and Tab was recognized by PC only flash PIT-File to go into Bootloader-Mode or flash complete 3-File-Firmware. Jtaging is not neccessary

tunjay-gsm · 04-05-2011, 11:53

thx duman thank u secsesfull reparis info done from rfii working well king off gsm

ryumahon · 04-12-2011, 05:51

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.20, JTAG Manager Version: 1.27
Selected Resurrector: [Samsung Galaxy Tab]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 18 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
Resurrection complete!

thanks riff box!!

excelpass · 04-15-2011, 09:40

what file did u use in odin for flashing?

fun · 04-15-2011, 09:49

Use PDA and don’t extract file from Rar,zip….

RNC_EBM · 04-16-2011, 02:28

Quote:

Originally Posted by excelpass

what file did u use in odin for flashing?

DOWNLOADER:

Odin Multi Downloader v1.7 & 1.82 - I9000, I9003, I9010, I9020, I9023, P1000

FIRMWARE:

EURO
P1000XWJMI
P1000XWJMK

.PIT File

ASIA
P1000DXKM2 with PIT File
P1000ZTKC1 with PIT File

br

RNC_EBM
PASS:836697d9d39d5b1e3dc16

ryumahon · 04-16-2011, 03:19

i used odin 1.17 and flash file from z3x support... contrary to what mr FUN said, i extracted the rar file downloaded from z3x and flashed the it with phone, pda and csc

after that MONEY IN THE BANK!!!!

ReyTech · 04-20-2011, 17:55

@c8387811
have u solved the problem? can u pls share how? as i too am facing the same problem!

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.22, JTAG Manager Version: 1.30
Selected Resurrector: [Samsung Galaxy Tab]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...
ERROR: Failed due to multiple communication errors. Terminating at 0x00000000

any help from moderators will be appreciated!
WBR
ReyTech.

yusufali786 · 04-20-2011, 18:23

try with battery + usb cable

t.bone · 04-23-2011, 12:56

hi guys
please help me i need dcc for galaxy tab p1000 main & spare

t.bone · 04-23-2011, 13:20

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.29
Selected Resurrector: [Samsung Galaxy Tab]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data checksum.

**legija** · 04-23-2011, 15:07

Hi,
What You want to do with the phone ?

ReyTech · 04-25-2011, 17:07

Quote:

Originally Posted by yusufali786

try with battery + usb cable

doesn't work! the same error!
Wbr
reytech

04-01-2011, 07:05	#32 (permalink)
c8387811 Freak Poster Join Date: Jul 2006 Posts: 144 Member: 310550 Status: Offline Thanks Meter: 3	Riff team come in please I repair P1000 dead boot erro: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.21, JTAG Manager Version: 1.29 Selected Resurrector: [Samsung Galaxy Tab] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB) Flashing the dead body... ERROR: Failed due to multiple communication errors. Terminating at 0x00000000 why?

04-12-2011, 05:51	#35 (permalink)
ryumahon No Life Poster Join Date: Apr 2001 Location: Sun Age: 44 Posts: 2,773 Member: 4021 Status: Offline Thanks Meter: 782	galaxy tab successfully revived!!! Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.20, JTAG Manager Version: 1.27 Selected Resurrector: [Samsung Galaxy Tab] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 18 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK Resurrection complete! thanks riff box!!

04-23-2011, 12:56	#42 (permalink)
t.bone Junior Member Join Date: Aug 2006 Posts: 4 Member: 329471 Status: Offline Thanks Meter: 0	need dcc for p1000 hi guys please help me i need dcc for galaxy tab p1000 main & spare

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
nokia 5110 dead	alpha	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	02-28-2001 11:59
8810 & 8210 Phone NOT respond! (Load Boot data)	AboAli	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	02-25-2001 14:47
F_loaders.bin and Boot.bin .. .	micklong	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	01-29-2001 14:49
Phone not respond! (Load boot data) Need a help !	SashaM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	01-23-2001 02:10
6150 V5.20 WANTED --- DEAD OR ALIVE --- IT'S BETTER ALIVE ! ;)))	tcamilo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	12-19-1999 22:30

04-01-2011, 07:50	#33 (permalink)
jomafi Freak Poster Join Date: Sep 2007 Posts: 443 Member: 596972 Status: Offline Sonork: 100.1591686 Thanks Meter: 55	In Case of first picture and Tab was recognized by PC only flash PIT-File to go into Bootloader-Mode or flash complete 3-File-Firmware. Jtaging is not neccessary

04-05-2011, 11:53	#34 (permalink)
tunjay-gsm No Life Poster Join Date: Aug 2006 Location: melbourne australia thailand Age: 48 Posts: 746 Member: 338192 Status: Offline Sonork: 1678261 Thanks Meter: 154	thx duman thank u secsesfull reparis info done from rfii working well king off gsm

04-15-2011, 09:40	#36 (permalink)
excelpass Freak Poster Join Date: Dec 2003 Age: 52 Posts: 488 Member: 47532 Status: Offline Thanks Meter: 18	what file did u use in odin for flashing?

04-15-2011, 09:49	#37 (permalink)
fun No Life Poster Join Date: Feb 2005 Location: Ireland Posts: 1,396 Member: 117145 Status: Offline Sonork: 1617520 Thanks Meter: 382	Use PDA and don’t extract file from Rar,zip….

04-16-2011, 03:19	#39 (permalink)
ryumahon No Life Poster Join Date: Apr 2001 Location: Sun Age: 44 Posts: 2,773 Member: 4021 Status: Offline Thanks Meter: 782	i used odin 1.17 and flash file from z3x support... contrary to what mr FUN said, i extracted the rar file downloaded from z3x and flashed the it with phone, pda and csc after that MONEY IN THE BANK!!!!

04-20-2011, 17:55	#40 (permalink)
ReyTech No Life Poster Join Date: Apr 2005 Location: india Posts: 1,410 Member: 135945 Status: Offline Thanks Meter: 85	@c8387811 have u solved the problem? can u pls share how? as i too am facing the same problem! Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.22, JTAG Manager Version: 1.30 Selected Resurrector: [Samsung Galaxy Tab] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB) Flashing the dead body... ERROR: Failed due to multiple communication errors. Terminating at 0x00000000 any help from moderators will be appreciated! WBR ReyTech.

04-20-2011, 18:23	#41 (permalink)
yusufali786 No Life Poster Join Date: Apr 2006 Location: Rajasthan (Kota) Posts: 733 Member: 265606 Status: Offline Sonork: 1603113 Thanks Meter: 460	try with battery + usb cable

04-23-2011, 13:20	#43 (permalink)
t.bone Junior Member Join Date: Aug 2006 Posts: 4 Member: 329471 Status: Offline Thanks Meter: 0	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.29 Selected Resurrector: [Samsung Galaxy Tab] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...FAILED ERROR: Wrong DCC data checksum.

04-23-2011, 15:07	#44 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, What You want to do with the phone ?