Unbrick dead Samsung GT-i9250 Galaxy Nexus, GT-I9100G , GT-I9300 - Page 4 - GSM-Forum

AndroUser · 06-09-2012, 18:25

Thanks itsalllgood, for your response .
I've installed the drivers in folder 'usb_drv_windows' provided in the zip. It shows up as 'OMAP4460 USB device' in my device manager.
I re-ran the script while it was loading the device, the script runs into the same error
'» Operation FAILED (Remote: : Unknown command dri)'

Question, shouldn't device be listed as OMAP4440? Do I have the wrong drivers?

Please me know if I need to provide any more device details.

Appreciate your help.

itsalllgood · 06-10-2012, 15:17

Quote:

Originally Posted by AndroUser

Thanks itsalllgood, for your response .
I've installed the drivers in folder 'usb_drv_windows' provided in the zip. It shows up as 'OMAP4460 USB device' in my device manager.
I re-ran the script while it was loading the device, the script runs into the same error
'» Operation FAILED (Remote: : Unknown command dri)'

Question, shouldn't device be listed as OMAP4440? Do I have the wrong drivers?

Please me know if I need to provide any more device details.

Appreciate your help.

-----------------
Extract the zip file before you install the driver

AndroUser · 06-10-2012, 15:57

Quote:

Originally Posted by itsalllgood

-----------------
Extract the zip file before you install the driver

Hi itsalllgood,

Files were unzipped locally and driver was installed from unzipped folder. The bat/script was run from within the script folder. Following is the complete output of the script. I tried the script several times by disconnecting and re-connecting the usb cable. It always lead to the same error. Please note my battery is not connected all this while.

» OMAPFlash v4.15 (Aug 12 2011)
» -v
» Entering parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.tx t at line: 1
» -omap 4
» -t 36000
» -p OMAP4460_TUNA_8G_HS_PRO
» -2
» chip_download EMMC Targets\Projects\tuna\MLO_4460_HS_PRO
» chip_download EMMC Targets\Projects\tuna\sbl.img
» command cold_sw_reset
» Leaving parameter file:Targets\Projects\tuna\omap4460_tuna_hs_pro.tx t
» @Targets\Projects\tuna\omap4460_tuna_hs_pro.txt
» Looking for device (omap usb)
» Please turn on device
» Waiting for device (omap usb)
» Found device (omap usb)
» Requesting ASIC id
» AsicId items 05
» AsicId id 01 05 01 44 40 07 01
» AsicId secure_mode 13 02 01 00
» AsicId public_id 12 15 01 31 87 C8 98 34 72 F2 3E BF 8A 12 74 37 BB 2C
43 EE 14 CD 03
» AsicId root_key_hash 14 21 01 67 98 9B 35 54 CC 86 B4 67 32 47 05 36 74 E2
25 F0 9D A3 5C F4 59 B9 C9 3A 13 E0 B9 58 1E 5A BC
» AsicId checksum 15 09 01 22 9E 85 BA DC 58 74 BC
» Searching 2nd for: OMAP4460_TUNA_8G_HS_PRO 444007 01 HS
» Loading second file Targets/2nd-Downloaders/dnld_startup_omap4_hs_8g_es2.s2.signed.2nd.hs_pro
» Entering parameter file

mapflash2nd.txt at line: 46
» -pheriphalboot_reopen
» Reading board configuration file Targets\Configurations\configuration_omap4460_tuna _8g.txt
» Reading definition file .\targets\definitions\definitions_omap4.txt
» -board_config Targets\Configurations\configuration_omap4460_tuna _8g.txt
» Leaving parameter file

mapflash2nd.txt
» Sending size of second file (0x000071B0 bytes)
» Transferring second file to target (0x71B0 bytes)
» Closing boot connection
» Found device (omap usb)
» Waiting for 2nd
» Found 2nd
» Looking for a driver for 'EMMC'
» chip_driver EMMC Targets\Flash-Drivers\emmc_drv.bin sid 0 width 4 delay 9 rpapi_base 0x00030400
» Downloading driver
» Operation FAILED (Remote: : Unknown command dri)
» Elapsed time: 0:23.293
Press any key to continue . . .

Thanks.

tayyab007 · 06-10-2012, 17:17

my i9100g gives logo.jpg draw failed. it is displayed on phone lcd. whats is the problem.

br

asif

itsalllgood · 06-11-2012, 02:23

Download this version:
OMAPFlash_1229_2ndlastt.rar

its the omap for i9000..copy the emmc_drv_ver416.bin and use it instead of the one you have..not sure it would work...but it seems the issue is with the emmc_drv

MUTUAL · 06-11-2012, 05:54

Quote:

Originally Posted by itsalllgood

Download this version:
OMAPFlash_1229_2ndlastt.rar

its the omap for i9000..copy the emmc_drv_ver416.bin and use it instead of the one you have..not sure it would work...but it seems the issue is with the emmc_drv

whats is the password

Masoud.ebi · 06-11-2012, 10:16

Hi

Mr Legija:

For gt-i9100g sleep mode,is it possible to convert Chinese locked bootloader to european or asian with unlocked boot ???

bcoz i repair boot successfully with this tool but already i am in CHINESE LOCKED BOOT & cant flash other fw to this phone (only chinese fw) .

whats a solution ???

tnx .

**legija** · 06-11-2012, 10:33

You can now access it via JTAG and play with it.

Masoud.ebi · 06-11-2012, 15:05

Which xloader i have select ? Xloader + or Xloader -

tnx

itsalllgood · 06-12-2012, 09:19

Mr. legija..been following this post for some times trying to get my phone back to life.. my phone came with the Canadian yakjuux firmware and I have posted the results before..do you think the omap flash is not working for me because of the omap4460 version since the older versions had incompatibility issues with some commands....or do i have a different set of hardware.. how do u think i should go about it if i use jtag..

bilkurd · 06-13-2012, 09:00

Quote:

Originally Posted by legija

https://rapidshare.com/files/1168981...Flash_tuna.zip

GT-I9250:
Just execute *.bat file from this package.
Installing drivers first would be pretty smart idea too.

Enjoy !

Edit:

For i9100G phones which have ID 0xFFFFFFFE, download this archive, unpack and run *.bat file from root folder:

Thanks to R3IS

https://rapidshare.com/files/3960209...9_2ndlastt.rar

thanks mate i using my nexus 9250 again .) just tried few times and worked finally thanks

...

*Diablo* · 06-14-2012, 13:02

Quote:

Originally Posted by MUTUAL

i m stil waiting for answer can some one tell me what to do? i have dead i9520 i can connect but always give error saying
EMMC eMMC DRIVER DEINIT COMPLETE
» Download failed (final data response error): Remote: : Driver init error 0x00F
F8080 - MMC CONFIG FAILURE
» Elapsed time: 0:05.453 (8730 bytes/s)
» Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE)

» Elapsed time: 0:18.531
Press any key to continue . . .

did you solved ?
have same problem but address different

MUTUAL · 06-15-2012, 00:27

Quote:

Originally Posted by *Diablo*

did you solved ?
have same problem but address different

no i did not no one tell me what to do now stil stuck same probelm

Mohsin-* · 06-15-2012, 21:59

with out Battery Program Run ok and Repair Done ,but nothing on LCD
With Battery i able see Download Screen but Phone Stuck there no Ask drivers ETC ,

can any one Help in Repair ?

KIKO_GSM · 06-17-2012, 09:31

add more coming soon here sir

http://forum.gsmhosting.com/vbb/f634...-here-1491725/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17
I am looking for information about GSM-CABLES.NE	DUPOND	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	08-03-1999 15:29
Selling original Nokia DAU9P cable	TheDon	Main Sales Section	0	07-21-1999 15:44
8810 mbus-cable	zfrank	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-19-1999 13:12

06-09-2012, 18:25	#46 (permalink)
AndroUser Junior Member Join Date: Jun 2012 Posts: 3 Member: 1769757 Status: Offline Thanks Meter: 0	Thanks itsalllgood, for your response . I've installed the drivers in folder 'usb_drv_windows' provided in the zip. It shows up as 'OMAP4460 USB device' in my device manager. I re-ran the script while it was loading the device, the script runs into the same error '» Operation FAILED (Remote: : Unknown command dri)' Question, shouldn't device be listed as OMAP4440? Do I have the wrong drivers? Please me know if I need to provide any more device details. Appreciate your help.

06-10-2012, 17:17	#49 (permalink)
tayyab007 No Life Poster Join Date: Mar 2007 Location: Saudi Arabia Posts: 549 Member: 476075 Status: Offline Sonork: na Thanks Meter: 40	my i9100g gives logo.jpg draw failed. it is displayed on phone lcd. whats is the problem. br asif

06-11-2012, 02:23	#50 (permalink)
itsalllgood Junior Member Join Date: Apr 2012 Posts: 19 Member: 1752435 Status: Offline Thanks Meter: 1	Download this version: OMAPFlash_1229_2ndlastt.rar its the omap for i9000..copy the emmc_drv_ver416.bin and use it instead of the one you have..not sure it would work...but it seems the issue is with the emmc_drv

06-11-2012, 10:16	#52 (permalink)
Masoud.ebi Banned Join Date: Aug 2005 Posts: 94 Member: 172448 Status: Offline Thanks Meter: 5	Hi Mr Legija: For gt-i9100g sleep mode,is it possible to convert Chinese locked bootloader to european or asian with unlocked boot ??? bcoz i repair boot successfully with this tool but already i am in CHINESE LOCKED BOOT & cant flash other fw to this phone (only chinese fw) . whats a solution ??? tnx .

06-11-2012, 10:33	#53 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	You can now access it via JTAG and play with it.

06-11-2012, 15:05	#54 (permalink)
Masoud.ebi Banned Join Date: Aug 2005 Posts: 94 Member: 172448 Status: Offline Thanks Meter: 5	Which xloader i have select ? Xloader + or Xloader - tnx

06-12-2012, 09:19	#55 (permalink)
itsalllgood Junior Member Join Date: Apr 2012 Posts: 19 Member: 1752435 Status: Offline Thanks Meter: 1	Mr. legija..been following this post for some times trying to get my phone back to life.. my phone came with the Canadian yakjuux firmware and I have posted the results before..do you think the omap flash is not working for me because of the omap4460 version since the older versions had incompatibility issues with some commands....or do i have a different set of hardware.. how do u think i should go about it if i use jtag..

06-15-2012, 21:59	#59 (permalink)
Mohsin-* No Life Poster Join Date: Dec 2006 Location: Pakistan/UAE/WorldWide Posts: 8,288 Member: 417298 Status: Offline Sonork: 100.1578269 Thanks Meter: 18,268	with out Battery Program Run ok and Repair Done ,but nothing on LCD With Battery i able see Download Screen but Phone Stuck there no Ask drivers ETC , can any one Help in Repair ?

06-17-2012, 09:31	#60 (permalink)
KIKO_GSM Temporary banned !! Join Date: Nov 2009 Location: P.H Age: 38 Posts: 1,069 Member: 1151970 Status: Offline Sonork: 100.1597000 Thanks Meter: 378	add more coming soon here sir http://forum.gsmhosting.com/vbb/f634...-here-1491725/