Samsung SC-03E (Docomo Galaxy S III) Easy to Unlock "READ CODE" only

[lanmmt]

Samsung SC-03E (Docomo Galaxy S III) Unlock Done

Procedure : I

To connect SC-03E phone you have to perform the following steps:

1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value
8. Go to "Qualcomm USB Settings"

9. Select "RNDIS+DM+MODEM".
10. Close window.
11. Go to dial window.
12. Press "Read Info" in software.

Procedure : II

1. Enter "*#7284#" number.
2. Set "USB" radio button to "PDA" value.




3. select (check) "Manual select" option and try again with each COM port



READ CODE DONE




DONE

[no1tkt]

Welcome to Octopus Box Samsung software version 1.8.3
-----------------------------------------------------------------------------------

To connect SC-03E phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Close window.
11. Go to dial window.
12. Press "Read Info" in software.
-------------------------------------------------------------
Platform: Samsung Android
Selected port: COM148
Selected model: SC-03E
Mode: Normal
Phone model: ACEFWMAZ
Warning: Selected model (SC-03E) differs from the detected one
(ACEFWMAZ)!
Firmware compiled date: Nov 20 2012
Firmware compiled time: 00:00:00
Firmware released date: Feb 8 2013
Firmware released time: 08:46:08
Phone IMEI: 353986-05-024742-1
SW Version: M9615A-CEFWMAZM-2.0.146012
Unlocking phone...
Phone is successfully unlocked
Please, restart the phone to apply changes

[ashok_duseja]

it is right way to read code for sc-03 by octopus
To connect SC-03E phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "DM+MODEM+ADB"and tab OK.
10.Next type *#9090# on phone
11.Salect DM/DUN over HSIC
12.wait for phone to resrart
13. select (check) "Manual select" option and try again with each COM port
12. Press "Read Info" in software.

[Vansy]

Samsung SC-03E (Docomo Galaxy S III) ,
when key in *#9090# or *#7284*
nothing happen, how to unlock it ?
I tried with uart or usb don't detect



I needed help please

BR

[Octopus box]

Try to re-flash your phone and repeat the operation.

[Vansy]

I have re-flash ready but still the same, I have 2 phnones the same problem

[Octopus box]

Currently we don't know another way how to connect your device. Try to search and write different firmwares and try again...

[ZiDanRO]

Originally Posted by Vansy

Samsung SC-03E (Docomo Galaxy S III) ,
when key in *#9090# or *#7284*
nothing happen, how to unlock it ?
I tried with uart or usb don't detect

I needed help please

BR

Bro, do a factory reset and when you configure your phone DON'T use Docomo Launcher, USE the TW Launcher. That is why your codes don't work.
No need to flash.

Also check you IMEI, if you don't have IMEI then this is another motive to not work *#9090#

[vikassoni]

Samsung SC-03E (Docomo Galaxy S III)
how to repair Unknown baseband and also IMEI repair.
*#9090# code not working, only blank screen.
how to fix it.

[Octopus box]

Most likely, phopne's EFS is damaged. Octopus/Octoplus Software currently doesn't support Repair EFS for this device.

[jawed_ali]

Many time try imei rep but its say phone emergency how to solve my phone is rooted any buddy help me

[Octopus box]

its say phone emergency

This means the phone is not connected correctly and doesn't answer to Software requests (CMDs). To connect the phone, carefully perform all steps from the first post above:

1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Close window.
11. Go to dial window.
12. Press "Read Info" in software.

[iPhoneUnlocke]

change ypur keypad to samsung keypad

[jawed_ali]

i am all ready chk all cmd even i try all its same problem

i need remortly help hoe can i do this 3 days itry but not done

[Octopus box]

What is the IMEI in your device, what is the phone's baseband exactly? Try to re-flash the phone and then connect again. Post here full Software log.