GT-I9300 Unbrick SD Card cloned..! - GSM-Forum

iqballk · 03-30-2013, 09:11

hi to all..

nowadays.. we can find a bin called "GT_I9300_unbrick_sdcard_head.bin" that can be cloned via linux. but.. unfortunately can't find a windows based cloning method.

but have found a cloning prog called HDDRAW Copy .

i appreciate if anyone can create a compressed image of his I9300 unbrick sdcard from this tool.
so..we all can repair dead boot of i9300 without a working phone.

thanks nd regards..

iqballk · 04-10-2013, 08:49

Finally.. have managed to create an Unbrick SD image..

here's a full dump of 4GB card, first completely cleaned, and then flashed with unbricking S-Boot.

* download this tiny i9300.7z file.. (883kb).

* extract using 7zip.. (beware, file inside archive is 4GB big).

* use HDDRawCopy from previous post to burn i9300.img (3.72GB) to a 4gb SD.

regards..

simo_scorpion · 04-18-2013, 19:45

is this work by any one.....................

ViperGSM · 04-19-2013, 17:37

19.4.2013. 18:18:12
19.4.2013. 18:18:12 HDD Raw Copy Tool 1.02; HDDGURU: Laptop and Desktop Hard Disk Drives, Tests, Software, Firmware, Tools, Data Recovery, HDD Repair
19.4.2013. 18:18:12
19.4.2013. 18:18:12 * * * * * IMPORTANT: DURING THE DUPLICATION PROCESS
19.4.2013. 18:18:12 ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN!
19.4.2013. 18:18:12
19.4.2013. 18:18:12 Source: [0] RAW i9300.img [3995,07 MB]
19.4.2013. 18:18:12 Target: [2] Generic STORAGE DEVICE 0272 [3965,19 MB]
19.4.2013. 18:18:17 Locking device...
19.4.2013. 18:18:17 Copying...
19.4.2013. 18:35:59 Write Error occurred at offset 3,964,600,320 (23)
19.4.2013. 18:35:59 Cannot write to target, aborting...
19.4.2013. 18:35:59 Average speed: 3,7 MB/s
19.4.2013. 18:35:59 Operation terminated at offset 3,964,600,320 LBA 7,743,360

debeliamark · 04-20-2013, 04:15

Quote:

Originally Posted by ViperGSM

19.4.2013. 18:18:12
19.4.2013. 18:18:12 HDD Raw Copy Tool 1.02; HDDGURU: Laptop and Desktop Hard Disk Drives, Tests, Software, Firmware, Tools, Data Recovery, HDD Repair
19.4.2013. 18:18:12
19.4.2013. 18:18:12 * * * * * IMPORTANT: DURING THE DUPLICATION PROCESS
19.4.2013. 18:18:12 ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN!
19.4.2013. 18:18:12
19.4.2013. 18:18:12 Source: [0] RAW i9300.img [3995,07 MB]
19.4.2013. 18:18:12 Target: [2] Generic STORAGE DEVICE 0272 [3965,19 MB]
19.4.2013. 18:18:17 Locking device...
19.4.2013. 18:18:17 Copying...
19.4.2013. 18:35:59 Write Error occurred at offset 3,964,600,320 (23)
19.4.2013. 18:35:59 Cannot write to target, aborting...
19.4.2013. 18:35:59 Average speed: 3,7 MB/s
19.4.2013. 18:35:59 Operation terminated at offset 3,964,600,320 LBA 7,743,360

There a lot of other tools that can do the job. Catch me on Skype ot ICQ - will explane you

ViperGSM · 04-20-2013, 12:00

I found the problem with card cloning, this img file is larger than 4gb sd card

P.S. thanks anyway

mentari · 04-20-2013, 13:54

viper gsm how u solve it thanks

ViperGSM · 04-20-2013, 14:02

i used 8gb sd card ( or 16gb ) but didn't managed to revive my i9300, nothing happens when i press power on and disconnect shortenning after 3-6 seconds... LCD remains black

GSMJordan · 04-21-2013, 09:58

Quote:

Originally Posted by ViperGSM

i used 8gb sd card ( or 16gb ) but didn't managed to revive my i9300, nothing happens when i press power on and disconnect shortenning after 3-6 seconds... LCD remains black

me to same problem, plz how test it

sloba · 05-16-2013, 18:16

for me,screen comes on,but sd card download fail

MOBINEC · 05-23-2013, 18:31

5/23/2013 7:17:07 PM ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN!
5/23/2013 7:17:07 PM
5/23/2013 7:17:07 PM Source: [0] RAW i9300.img [3995.07 MB]
5/23/2013 7:17:07 PM Target: [2] ChipsBnk Flash Disk 4082 [7948.2 MB]
5/23/2013 7:17:11 PM Locking device...
5/23/2013 7:17:12 PM Copying...
5/23/2013 7:27:46 PM Average speed: 6.3 MB/s
5/23/2013 7:27:46 PM Task complete.

not working

banalven1 · 05-28-2013, 02:24

anyone successful unbrick i9300 with this sd card clone method ?

sakoou · 06-04-2013, 10:04

Quote:

Originally Posted by banalven1

anyone successful unbrick i9300 with this sd card clone method ?

Yes it work fine for me 100%
Best special thinks at iqballk for previous post and solution....

so..we all can repair dead boot of i9300 without a working phone.

sakoou · 06-04-2013, 12:01

How to recover S3 I9300 dead boot

I tested and it work fine for me

The things you will need:
First , to make GT-I9300 Unbrick SD Card cloned

i used the method of iqballk ;

* download this tiny i9300.7z file.. (883kb).

* extract using 7zip...

* use HDDRAW Copy to burn i9300.img (3.72GB) to a 4gb SD card.
For me;i used 4GB SD card completely cleaned
After successful burn sd card clone ;
Disassemble the S3 I9300 Dead

Insert SD card cloned to PBA

Connect the PBA with rj45 c3300K (C3303K UART Auto Ignition! it's use to repair I9300 imei) and connect rj45 to the box (for me i connected to riff box rj45)
insert battery

Short R313 resistance.(HQ uses tweezers to short the resistance)

Turn on the PBA, and REMOVE THE SHORT between 3 to 6 seconds from turning on the PBA.
After approximately 5 seconds, you can see message on the LCD boot recovery was succeeded

Turn off the pba, and remove SD Card.
Assemble the phone, and enter download mode.Download Full S/W including PIT, PDA, CSC and PHONE with ODIN.

Here is how i repaired my S3 I9300 without normal I9300

mojodojo · 06-04-2013, 20:51

Will this work with any other box like ns pro or z3x with rj45 cable uart connected to box ?

Thanks

03-30-2013, 09:11	#1 (permalink)
iqballk No Life Poster Join Date: Jul 2002 Location: sri lanka Age: 33 Posts: 1,386 Member: 13932 Status: Offline Sonork: 100.1609876 Thanks Meter: 396	GT-I9300 Unbrick SD Card cloned..! hi to all.. nowadays.. we can find a bin called "GT_I9300_unbrick_sdcard_head.bin" that can be cloned via linux. but.. unfortunately can't find a windows based cloning method. but have found a cloning prog called HDDRAW Copy . i appreciate if anyone can create a compressed image of his I9300 unbrick sdcard from this tool. so..we all can repair dead boot of i9300 without a working phone. thanks nd regards..

06-04-2013, 20:51	#15 (permalink)
mojodojo Freak Poster Join Date: Jul 2006 Posts: 428 Member: 319138 Status: Offline Thanks Meter: 24	will it work with other box's Will this work with any other box like ns pro or z3x with rj45 cable uart connected to box ? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-10-2013, 08:49	#2 (permalink)
iqballk No Life Poster Join Date: Jul 2002 Location: sri lanka Age: 33 Posts: 1,386 Member: 13932 Status: Offline Sonork: 100.1609876 Thanks Meter: 396	Finally.. have managed to create an Unbrick SD image.. here's a full dump of 4GB card, first completely cleaned, and then flashed with unbricking S-Boot. * download this tiny i9300.7z file.. (883kb). * extract using 7zip.. (beware, file inside archive is 4GB big). * use HDDRawCopy from previous post to burn i9300.img (3.72GB) to a 4gb SD. regards..

04-18-2013, 19:45	#3 (permalink)
simo_scorpion Freak Poster Join Date: Mar 2004 Location: Austria Age: 39 Posts: 245 Member: 57712 Status: Offline Thanks Meter: 28	is this work by any one.....................

04-19-2013, 17:37	#4 (permalink)
ViperGSM No Life Poster Join Date: Jan 2004 Location: Serbia Age: 34 Posts: 850 Member: 49634 Status: Offline Sonork: 100.1671023 Thanks Meter: 64	19.4.2013. 18:18:12 19.4.2013. 18:18:12 HDD Raw Copy Tool 1.02; HDDGURU: Laptop and Desktop Hard Disk Drives, Tests, Software, Firmware, Tools, Data Recovery, HDD Repair 19.4.2013. 18:18:12 19.4.2013. 18:18:12 * * * * * IMPORTANT: DURING THE DUPLICATION PROCESS 19.4.2013. 18:18:12 ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN! 19.4.2013. 18:18:12 19.4.2013. 18:18:12 Source: [0] RAW i9300.img [3995,07 MB] 19.4.2013. 18:18:12 Target: [2] Generic STORAGE DEVICE 0272 [3965,19 MB] 19.4.2013. 18:18:17 Locking device... 19.4.2013. 18:18:17 Copying... 19.4.2013. 18:35:59 Write Error occurred at offset 3,964,600,320 (23) 19.4.2013. 18:35:59 Cannot write to target, aborting... 19.4.2013. 18:35:59 Average speed: 3,7 MB/s 19.4.2013. 18:35:59 Operation terminated at offset 3,964,600,320 LBA 7,743,360

04-20-2013, 12:00	#6 (permalink)
ViperGSM No Life Poster Join Date: Jan 2004 Location: Serbia Age: 34 Posts: 850 Member: 49634 Status: Offline Sonork: 100.1671023 Thanks Meter: 64	I found the problem with card cloning, this img file is larger than 4gb sd card P.S. thanks anyway

04-20-2013, 13:54	#7 (permalink)
mentari No Life Poster Join Date: Sep 2003 Age: 37 Posts: 619 Member: 39948 Status: Offline Thanks Meter: 67	viper gsm how u solve it thanks

04-20-2013, 14:02	#8 (permalink)
ViperGSM No Life Poster Join Date: Jan 2004 Location: Serbia Age: 34 Posts: 850 Member: 49634 Status: Offline Sonork: 100.1671023 Thanks Meter: 64	i used 8gb sd card ( or 16gb ) but didn't managed to revive my i9300, nothing happens when i press power on and disconnect shortenning after 3-6 seconds... LCD remains black

05-16-2013, 18:16	#10 (permalink)
sloba Freak Poster Join Date: Nov 1999 Location: Serbia Age: 46 Posts: 266 Member: 685 Status: Offline Thanks Meter: 23	for me,screen comes on,but sd card download fail

05-23-2013, 18:31	#11 (permalink)
MOBINEC Insane Poster Join Date: Mar 2011 Location: Macedonia Posts: 63 Member: 1534323 Status: Offline Sonork: 578316251 Thanks Meter: 5	5/23/2013 7:17:07 PM ALL DATA ON TARGET WILL BE IRREVERSIBLY OVERWRITTEN! 5/23/2013 7:17:07 PM 5/23/2013 7:17:07 PM Source: [0] RAW i9300.img [3995.07 MB] 5/23/2013 7:17:07 PM Target: [2] ChipsBnk Flash Disk 4082 [7948.2 MB] 5/23/2013 7:17:11 PM Locking device... 5/23/2013 7:17:12 PM Copying... 5/23/2013 7:27:46 PM Average speed: 6.3 MB/s 5/23/2013 7:27:46 PM Task complete. not working

05-28-2013, 02:24	#12 (permalink)
banalven1 Freak Poster Join Date: Nov 2005 Location: Malaysia Age: 37 Posts: 451 Member: 202941 Status: Offline Thanks Meter: 82	anyone successful unbrick i9300 with this sd card clone method ?

06-04-2013, 12:01	#14 (permalink)
sakoou Insane Poster Join Date: Oct 2010 Posts: 77 Member: 1410502 Status: Offline Sonork: 100.1645892 Thanks Meter: 26	How to recover S3 I9300 dead boot I tested and it work fine for me The things you will need: First , to make GT-I9300 Unbrick SD Card cloned i used the method of iqballk ; * download this tiny i9300.7z file.. (883kb). * extract using 7zip... * use HDDRAW Copy to burn i9300.img (3.72GB) to a 4gb SD card. For me;i used 4GB SD card completely cleaned After successful burn sd card clone ; Disassemble the S3 I9300 Dead Insert SD card cloned to PBA Connect the PBA with rj45 c3300K (C3303K UART Auto Ignition! it's use to repair I9300 imei) and connect rj45 to the box (for me i connected to riff box rj45) insert battery Short R313 resistance.(HQ uses tweezers to short the resistance) Turn on the PBA, and REMOVE THE SHORT between 3 to 6 seconds from turning on the PBA. After approximately 5 seconds, you can see message on the LCD boot recovery was succeeded Turn off the pba, and remove SD Card. Assemble the phone, and enter download mode.Download Full S/W including PIT, PDA, CSC and PHONE with ODIN. Here is how i repaired my S3 I9300 without normal I9300