Successfully Unlocked/Debranding phones w/Octopusbox - Page 120 - GSM-Forum

Dr_Wolodya · 01-30-2012, 18:50

Flashing LG KP500:

Code:

Welcome to Octopus Box LG Software version 2.0.6
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: KP500
Disconnect battery and connect USB cable to phone...
Reading info. Please wait...
IMEI: 352701-03-853927-3
Opening "KP500AT-00-V10n-CIS-XXX-DEC-17-2008.oct"...OK
Writing Firmware...
Writing Firmware done!
Disconnected.

Dr_Wolodya · 02-03-2012, 11:30

Flashing LG KM900:

Code:

Welcome to Octopus Box LG Software version 2.0.6
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: KM900
Disconnect battery and connect USB cable to phone...
Reading info. Please wait...
IMEI: 352154-03-508341-8
Opening "KM900AT-00-V10k-CIS-XXX-MAY-07-2009+0.oct"...OK
Will be written 11 zone(s)
Writing Firmware...
Sending certificate...OK
Writing "psi_large_block_16_bit_paging.flb"...OK
Sending certificate...OK
Writing "slb_large_block_16_bit_paging.flb"...OK
Sending certificate...OK
Writing "MPEH_OPERA_EUROPE_OPEN.fls"...OK
Writing "MPEH_OPERA_EUROPE_OPEN.fls"...OK
Sending certificate...OK
Writing "MPEH_OPERA_EUROPE_OPEN.eep"...OK
Sending certificate...OK
Writing "MPEH_OPERA_EUROPE_OPEN.dsp"...OK
Sending certificate...OK
Writing "ua_large_block_16_bit_paging.flb"...OK
Sending certificate...OK
Writing "OPERA_EUROPE_OPEN-ROOT.dfat"...OK
Sending certificate...OK
Writing "OPERA_EUROPE_OPEN-CUST.dfat"...OK
Sending certificate...OK
Writing "OPERA_EUROPE_OPEN-USER.dfat"...OK
Sending certificate...OK
Writing "a250_single_image.fls"...OK
Writing Firmware done!
Disconnected.

champions1 · 02-03-2012, 15:53

Welcome to Octopus Box LG Software version 2.0.5
--------------------------------------------------------------------------------
Platform: LG MTK
Selected port: COM45
Selected baudrate: 115200
Selected model: C360
Please, disconnect battery and connect cable...
Phone found.
Setting power state...OK
Prepairing loader...OK
Sending loader...OK
Synchronizing with loader...OK
Detecting NOR flash chip...OK
Detecting NAND flash chip...OK
Reading info...OK
Setting baudrate...OK
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 358331-04-070963-3
Bluetooth address: F0:1C:13:A3:B7:84
NAND flash chip: Hynix
NAND size: 256 Mb
NAND page size: 2048 b
NAND spare size: 64 b
NAND pages per block: 64
--------------------------------------------------------------------------------
Reading codes...OK
NCK: 7173 0430 3202 1978
NSCK: 3565 4126 2653 2593
SPCK: 1192 3714 7591 4522
CCK: 1616 5140 5057 4941
SIM: 3167 9010 0648 4286
To finish the operation, please perform the following steps:
1. Insert the original SIM card or Motorola Test card and type 2945#*360#
2. Enter code.
--------------------------------------------------------------------------------
Platform: LG MTK
Selected port: COM45
Selected baudrate: 115200
Selected model: C360
Please, disconnect battery and connect cable...
Phone found.
Setting power state...OK
Prepairing loader...OK
Sending loader...OK
Synchronizing with loader...OK
Detecting NOR flash chip...OK
Detecting NAND flash chip...OK
Reading info...OK
Setting baudrate...OK
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 358331-04-038154-0
Bluetooth address: 70:05:14:F8:40:85
NAND flash chip: Hynix
NAND size: 256 Mb
NAND page size: 2048 b
NAND spare size: 64 b
NAND pages per block: 64
--------------------------------------------------------------------------------
Reading codes...OK
NCK: 7002 2572 8960 5450
NSCK: 3638 0049 6443 9752
SPCK: 2821 9034 2117 1608
CCK: 8618 4933 5548 5424
SIM: 9810 0268 2748 6655
To finish the operation, please perform the following steps:
1. Insert the original SIM card or Motorola Test card and type 2945#*360#
2. Enter code.

regards,

champions.

Dr_Wolodya · 02-03-2012, 16:18

Converting LG A110 to LG GS101 for language changing:

Code:

Platform: LG Infineon
Selected port: COM3
Selected baudrate: 921600
Selected model: GS101
Please, disconnect battery and connect cable...
Phone found.
Sending preloader...OK
Sending loader...OK
Reading info. Please wait...
Flash ID: 20002888
Flash type: ST
IMEI: 354615-04-139946-7
Opening "GS101AT-00-V10a-CIS-XXX-OCT-27-2010+0.oct"...OK
Erasing. Please wait...OK
Writing Firmware...OK
Writing Firmware done!
Disconnected.

GSMaxx · 02-04-2012, 08:24

SGS II 4G T989 T-mobile - android v2.3.5

Code:

-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM41
Selected model: SGH-T989
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM44
Mode: Normal
Phone model: SGH-T989
Phone IMEI: 357930-04-xxxxxx-x
SW Version: T989UVKID/T989UVKID
HW Version: REV0.1
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM44
Selected model: SGH-T989
Mode: Normal
Phone model: SGH-T989
Phone IMEI: 357930-04-xxxxxx-x
SW Version: T989UVKID/T989UVKID
HW Version: REV0.1
Unlocking phone...
Switching to emergency mode
Phone found 
Deactiveting MSL...
Deactiveting MSL OK
Disconect phone and type *#9090# select USB mode
type *#7284# and select Modem
Reboot phone and connect switched On phone to USB cable
Searching for phone. Please wait...
Incorrect IMEI
SW Version: T989UVKID/T989UVKID
HW Version: None
Found phone on COM44
Phone is successfully unlocked
Please, restart phone to apply changes

Dilip_Nath · 02-04-2012, 09:21

Code:

Welcome to Octopus Box LG Software version 2.0.5
--------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port: 
Selected baudrate: 0
Selected model: GW300FD
Disconnect battery and connect USB cable to phone...OK
Sending preloader...OK
Reconnecting phone...OK
Sending loader...OK
Reading info...OK
IMEI: 352969-04-170124-4
Bluetooth address: 5C:17:D3:C9:F9:D3
NAND flash ID: ECB1
NAND flash chip: Samsung
Unlocking...
Reading security area...OK
Writing security area...OK
Phone successfully unlocked!

..::Rizwan::.. · 02-04-2012, 12:51

Welcome to Octopus Box LG Software version 2.0.6
--------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port: COM88
Selected baudrate: 921600
Selected model: GM205
Please reconnect battery...
Phone found.
Sending loader...OK
Reading info...
Flash ID: 8988
Flash type: Intel
IMEI: 359931-03-065776-4
Backuping EEPROM...OK
Backup saved to
"GM205-359931030657764_04-02-2012_16-28-46"
Reading security area...OK
Writing security area...OK
Phone succesfully unlocked!

Dr_Wolodya · 02-04-2012, 14:52

Unlocking LG KP235:

Code:

Platform: LG Analog Devices
Selected port: COM3
Selected baudrate: 921600
Selected model: KP235
Please reconnect battery, press and hold power button...
Phone found.
Sending loader...OK
Release power button.
Reading info...
Flash ID: 8988
Flash type: Intel
IMEI: 352127-02-498837-5
Backuping Calibration data...OK
Unlocking...
Phone succesfully unlocked!

joey9891 · 02-05-2012, 19:29

Welcome to Octopus Box LG Software version 2.0.6
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM8
Selected model: GD510
This action requires COM cable!
Phone and phone lights should be powered ON
Reading phone info...Failed!
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM8
Selected model: GD510
This action requires COM cable!
Phone and phone lights should be powered ON
Reading phone info...Failed!
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM8
Selected baudrate: 921600
Selected model: GD510
Please reconnect battery, press and hold power button...
Phone found.
Release power button.
Sending loader...OK
Reading info. Please wait...
IMEI: 359930-03-267880-2
Reading codes. Please wait...
Backup saved to
"GD510-359930032678802_05-02-2012_14-23-24.eep"
--------------------------------------------------------------------------------
NCK : 1490 6832 4117 0499
NSCK : 9450 5276 7945 3724
SPCK : 8959 8293 9856 6088
CCK : 3514 6803 1905 2905
SIM : 3207 1212 5389 5732
MCC: 302 (Canada)
MNC: 72
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*510#
2. Go to menu>Settings>Security>SIMLOCK and enter the code.

amyll · 02-06-2012, 02:39

gs290 yellow screen solved

To finish the operation, please perform the following steps:
1. Press "Disconnect"
2. Power phone ON (Please hold the power button for 30 sec)
3. Restore the original IMEI using the "IMEI fix" option.
4. If after repairing EEPROM phone will have Yellow/Blue screen, please
re-flash phone with the latest firmware from the support area.
Reading info. Please wait...
IMEI: 359132-03-449987-9
Disconnected.
--------------------------------------------------------------------------------
Platform: LG Infineon
Selected port: COM6
Selected baudrate: 921600
Selected model: GS290
Detecting phone...
Detected phone in normal mode!
Trying to connect in flash mode..
Phone found.
Sending loader...OK
Reading info. Please wait...
IMEI: 359132-03-449987-9
Opening "GS290AT-00-V10d-EUR-XXX-MAR-11-2010+0.oct"...OK
Writing Firmware...
Writing Firmware done!
Disconnected.

gsm_links · 02-07-2012, 15:27

Wbr

s n hasan

haigoshi · 02-08-2012, 12:35

Welcome to Octopus Box LG Software version 2.0.6
--------------------------------------------------------------------------------

Mode: Normal
Phone model: SW400809
SW Version: M6281A-KLUZ-4.0.9530T
IMEI: 354247-02-170393-8
Firmware compiled date: Jan 07 2008
Firmware compiled time: 19:00:00
Firmware released date: Oct 02 2008
Firmware released time: 11:02:32
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM23
Selected model: SH400
Mode: Normal
Phone model: SW400809
SW Version: M6281A-KLUZ-4.0.9530T
IMEI: 354247-02-170393-8
Checking security...OK
Prepairing loader...OK
Sending loader...OK
Searching signatures...
Signature #1...OK, not patched
Patching...
Signature #1...OK
Phone successfully unlocked!
Rebooting phone...

dapx · 02-09-2012, 23:22

Hi, I new User of the Great Box....
It is my 1º Unlock with Octopus... Thanks

Code:

Welcome to Octopus Box LG Software version 2.0.6
--------------------------------------------------------------------------
Platform: LG Infineon
Selected port: USB
Selected model: T500
Disconnect battery and connect USB cable to phone...OK
Sending preloader...OK
Sending loader...OK
Initializing flash...OK
Flash ID: ADBA
Flash Vendor: Hynix
Reading info...
IMEI: 357350-04-3
Bluetooth address: F0:1C:13:A6:CC:F1
Firmware version: V10a
Locks: Network Lock
MCC=214 (Spain)
MNC=07 (movistar (Telefónica Móviles España))
Selecting output file...OK
Destination file: "T500_357350043_09-02-2012_17-29-27.EEP"
Reading EEPROM...OK
Selecting output file...OK
Destination file: "T500_357350043_09-02-2012_17-29-33.ful"
Reading Full flash...OK
Unlocking...
Reading EEPROM...OK
Backup saved to "T500_357350043_09-02-2012_19-13-31.EEP"
Reading security area...OK
Writing security area...OK
Writing EEPROM...OK
Phone successfully unlocked!

haigoshi · 02-10-2012, 17:24

KH1800M Hangon logo and restart Flash ,unlock ok
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM43
Selected model: KH1800M
Mode: Emergency
--------------------------------------------------------------------------------
Opening "KW18M807_00.oct"...OK
Writing Firmware...
Erasing EFS...OK
Writing MIBIB...OK
Writing QCSBL...OK
Writing OEMSBL1...OK
Writing OEMSBL2...OK
Writing AMSS...OK
Writing FAT...OK
Writing EFS2...OK
Phone startup...OK
Repairing NVM...OK
Writing Firmware done!
Rebooting phone...
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM43
Selected model: KH1800M
Mode: Normal
Phone model: KW18M807
SW Version: M6281A-KLVZ-4.0.9530T
IMEI: 354243-02-409575-2
Bluetooth address: 00:00:00:00:00:00
Checking security...OK
Prepairing loader...OK
Sending loader...OK
Searching signatures...
Signature #1...OK, not patched
Patching...
Signature #1...OK
Phone successfully unlocked!
Rebooting phone...

anrmobile · 02-11-2012, 13:26

Welcome to Octopus Box LG Software version 2.0.6
--------------------------------------------------------------------------------
Platform: LG SEMC
Selected port: COM3
Selected baudrate: 921600
Selected model: GR500
Use Testpoint/Jumper: No
--------------------------------------------------------------------------------
For correct working the battery must be fully charged!
Please, reconnect battery, press and hold camera button and connect
USB cable.
If phone not connected, connect (solder) jumper according to picture
("Show testpoint" button).
Starting...
Phone found!
Chip ID: 0xD9000401FFFFFFFF
Chipset: DB3200
BootROM mode detected
Sending ACC preloader...OK
Sending APP preloader...OK
CID: 54
IMEI: 354324-03-251887-6
Color: Red
Sending ACC production loader...OK
Sending APP production loader...OK
Opening "GR500-GDFS-FIX.GDFS"...OK
APP GDFS blocks count: 217
ACC GDFS blocks count: 1048
Writing APP GDFS...
Writing APP GDFS done!
Writing ACC GDFS...
Writing ACC GDFS done!
Disconnected.

02-03-2012, 15:53	#1788 (permalink)
champions1 Freak Poster Join Date: Nov 2009 Location: U.K (leeds) Posts: 137 Member: 1157490 Status: Offline Sonork: 100.1638346 Thanks Meter: 74	LG-C360 successfully unlocked. Welcome to Octopus Box LG Software version 2.0.5 -------------------------------------------------------------------------------- Platform: LG MTK Selected port: COM45 Selected baudrate: 115200 Selected model: C360 Please, disconnect battery and connect cable... Phone found. Setting power state...OK Prepairing loader...OK Sending loader...OK Synchronizing with loader...OK Detecting NOR flash chip...OK Detecting NAND flash chip...OK Reading info...OK Setting baudrate...OK Checking security...OK -------------------------------------------------------------------------------- IMEI: 358331-04-070963-3 Bluetooth address: F0:1C:13:A3:B7:84 NAND flash chip: Hynix NAND size: 256 Mb NAND page size: 2048 b NAND spare size: 64 b NAND pages per block: 64 -------------------------------------------------------------------------------- Reading codes...OK NCK: 7173 0430 3202 1978 NSCK: 3565 4126 2653 2593 SPCK: 1192 3714 7591 4522 CCK: 1616 5140 5057 4941 SIM: 3167 9010 0648 4286 To finish the operation, please perform the following steps: 1. Insert the original SIM card or Motorola Test card and type 2945#360# 2. Enter code. -------------------------------------------------------------------------------- Platform: LG MTK Selected port: COM45 Selected baudrate: 115200 Selected model: C360 Please, disconnect battery and connect cable... Phone found. Setting power state...OK Prepairing loader...OK Sending loader...OK Synchronizing with loader...OK Detecting NOR flash chip...OK Detecting NAND flash chip...OK Reading info...OK Setting baudrate...OK Checking security...OK -------------------------------------------------------------------------------- IMEI: 358331-04-038154-0 Bluetooth address: 70:05:14:F8:40:85 NAND flash chip: Hynix NAND size: 256 Mb NAND page size: 2048 b NAND spare size: 64 b NAND pages per block: 64 -------------------------------------------------------------------------------- Reading codes...OK NCK: 7002 2572 8960 5450 NSCK: 3638 0049 6443 9752 SPCK: 2821 9034 2117 1608 CCK: 8618 4933 5548 5424 SIM: 9810 0268 2748 6655 To finish the operation, please perform the following steps: 1. Insert the original SIM card or Motorola Test card and type 2945#360# 2. Enter code. regards, champions.

02-04-2012, 12:51	#1792 (permalink)
..::Rizwan::.. No Life Poster Join Date: May 2008 Location: P@Ki$t@n Posts: 3,165 Member: 777415 Status: Offline Sonork: 1589702 Thanks Meter: 1,420	Lg GM 205 Unlock Done Welcome to Octopus Box LG Software version 2.0.6 -------------------------------------------------------------------------------- Platform: LG Analog Devices Selected port: COM88 Selected baudrate: 921600 Selected model: GM205 Please reconnect battery... Phone found. Sending loader...OK Reading info... Flash ID: 8988 Flash type: Intel IMEI: 359931-03-065776-4 Backuping EEPROM...OK Backup saved to "GM205-359931030657764_04-02-2012_16-28-46" Reading security area...OK Writing security area...OK Phone succesfully unlocked!

02-05-2012, 19:29	#1794 (permalink)
joey9891 Freak Poster Join Date: Feb 2011 Location: in the darkness Posts: 442 Member: 1516808 Status: Offline Thanks Meter: 95	GD510 Unlocked Welcome to Octopus Box LG Software version 2.0.6 -------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM8 Selected model: GD510 This action requires COM cable! Phone and phone lights should be powered ON Reading phone info...Failed! -------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM8 Selected model: GD510 This action requires COM cable! Phone and phone lights should be powered ON Reading phone info...Failed! -------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM8 Selected baudrate: 921600 Selected model: GD510 Please reconnect battery, press and hold power button... Phone found. Release power button. Sending loader...OK Reading info. Please wait... IMEI: 359930-03-267880-2 Reading codes. Please wait... Backup saved to "GD510-359930032678802_05-02-2012_14-23-24.eep" -------------------------------------------------------------------------------- NCK : 1490 6832 4117 0499 NSCK : 9450 5276 7945 3724 SPCK : 8959 8293 9856 6088 CCK : 3514 6803 1905 2905 SIM : 3207 1212 5389 5732 MCC: 302 (Canada) MNC: 72 To finish the operation, please perform the following steps: 1. Insert the original SIM card and type 2945#*510# 2. Go to menu>Settings>Security>SIMLOCK and enter the code.

02-07-2012, 15:27	#1796 (permalink)
gsm_links No Life Poster Join Date: Aug 2007 Location: India\China Posts: 1,340 Member: 561947 Status: Offline Sonork: 100.1580399 Thanks Meter: 948	lg android p500 unlock successfully Wbr s n hasan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Post here successfully unlocked a2 phones	3lsheikh	SETool2	10	03-04-2011 02:48
Successfully Unlock Z240 Phone Freeze	jhepoy_org	UST Pro II	13	12-02-2009 06:03
Successfully unlock BB5 phones with bb5king	Mjabbar	BB5KING	0	11-29-2008 14:13
Successfully unlock BB5 phones with bb5king	Mjabbar	BB5KING	2	11-26-2008 11:54
PB2 - Successfully unlocked LG phones CU/KU ...	DOUHAL	PolarBox 3	72	11-05-2008 18:21

02-06-2012, 02:39	#1795 (permalink)
amyll No Life Poster Join Date: May 2007 Location: Islamic city of Marawi Posts: 620 Member: 502507 Status: Offline Sonork: 100.1648947 Thanks Meter: 154	gs290 yellow screen solved To finish the operation, please perform the following steps: 1. Press "Disconnect" 2. Power phone ON (Please hold the power button for 30 sec) 3. Restore the original IMEI using the "IMEI fix" option. 4. If after repairing EEPROM phone will have Yellow/Blue screen, please re-flash phone with the latest firmware from the support area. Reading info. Please wait... IMEI: 359132-03-449987-9 Disconnected. -------------------------------------------------------------------------------- Platform: LG Infineon Selected port: COM6 Selected baudrate: 921600 Selected model: GS290 Detecting phone... Detected phone in normal mode! Trying to connect in flash mode.. Phone found. Sending loader...OK Reading info. Please wait... IMEI: 359132-03-449987-9 Opening "GS290AT-00-V10d-EUR-XXX-MAR-11-2010+0.oct"...OK Writing Firmware... Writing Firmware done! Disconnected.

02-08-2012, 12:35	#1797 (permalink)
haigoshi Freak Poster Join Date: May 2007 Location: SL3 averages 13min/code Age: 44 Posts: 236 Member: 501129 Status: Offline Thanks Meter: 63	Welcome to Octopus Box LG Software version 2.0.6 -------------------------------------------------------------------------------- Mode: Normal Phone model: SW400809 SW Version: M6281A-KLUZ-4.0.9530T IMEI: 354247-02-170393-8 Firmware compiled date: Jan 07 2008 Firmware compiled time: 19:00:00 Firmware released date: Oct 02 2008 Firmware released time: 11:02:32 -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM23 Selected model: SH400 Mode: Normal Phone model: SW400809 SW Version: M6281A-KLUZ-4.0.9530T IMEI: 354247-02-170393-8 Checking security...OK Prepairing loader...OK Sending loader...OK Searching signatures... Signature #1...OK, not patched Patching... Signature #1...OK Phone successfully unlocked! Rebooting phone...

02-10-2012, 17:24	#1799 (permalink)
haigoshi Freak Poster Join Date: May 2007 Location: SL3 averages 13min/code Age: 44 Posts: 236 Member: 501129 Status: Offline Thanks Meter: 63	*KH1800M Hangon logo and restart Flash ,unlock ok* -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM43 Selected model: KH1800M Mode: Emergency -------------------------------------------------------------------------------- Opening "KW18M807_00.oct"...OK Writing Firmware... Erasing EFS...OK Writing MIBIB...OK Writing QCSBL...OK Writing OEMSBL1...OK Writing OEMSBL2...OK Writing AMSS...OK Writing FAT...OK Writing EFS2...OK Phone startup...OK Repairing NVM...OK Writing Firmware done! Rebooting phone... -------------------------------------------------------------------------------- Platform: LG Qualcomm Selected port: COM43 Selected model: KH1800M Mode: Normal Phone model: KW18M807 SW Version: M6281A-KLVZ-4.0.9530T IMEI: 354243-02-409575-2 Bluetooth address: 00:00:00:00:00:00 Checking security...OK Prepairing loader...OK Sending loader...OK Searching signatures... Signature #1...OK, not patched Patching... Signature #1...OK Phone successfully unlocked! Rebooting phone...

02-11-2012, 13:26	#1800 (permalink)
anrmobile No Life Poster Join Date: Oct 2011 Location: online Posts: 871 Member: 1680232 Status: Offline Sonork: 100.1611221 Thanks Meter: 227	Welcome to Octopus Box LG Software version 2.0.6 -------------------------------------------------------------------------------- Platform: LG SEMC Selected port: COM3 Selected baudrate: 921600 Selected model: GR500 Use Testpoint/Jumper: No -------------------------------------------------------------------------------- For correct working the battery must be fully charged! Please, reconnect battery, press and hold camera button and connect USB cable. If phone not connected, connect (solder) jumper according to picture ("Show testpoint" button). Starting... Phone found! Chip ID: 0xD9000401FFFFFFFF Chipset: DB3200 BootROM mode detected Sending ACC preloader...OK Sending APP preloader...OK CID: 54 IMEI: 354324-03-251887-6 Color: Red Sending ACC production loader...OK Sending APP production loader...OK Opening "GR500-GDFS-FIX.GDFS"...OK APP GDFS blocks count: 217 ACC GDFS blocks count: 1048 Writing APP GDFS... Writing APP GDFS done! Writing ACC GDFS... Writing ACC GDFS done! Disconnected.