GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Octopus/Octoplus > Octopus LG/Octoplus LG
Reload this Page Successfully Unlocked/Debranding phones w/Octopusbox
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source


Reply
Page 384 of 423 « First 284334374381382383 384 385386387394 Last »
 
LinkBack Thread Tools Display Modes
Old 11-19-2018, 07:41   #5746 (permalink)
No Life Poster
 
..:::GSM CLUB™:::..'s Avatar
 
Join Date: Sep 2008
Location: Bd,Dhaka,GSM CLUB
Age: 38
Posts: 1,002
Member: 859030
Status: Offline
Sonork: 100.1619336
Thanks Meter: 435
Donate money to this user
Thumbs up V521 Reset FRP successfully done

Welcome to Octoplus/Octopus Box LG Software version 2.8.9.8
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM1
Selected model: V521
Reading info...
Could not detect mode!
Performed by 2.8.9.8 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM391
Selected model: V521
Reading info...
Model ID: LG-V521
IMEI: 356286-07-223995-2
Android version: 6.0.1
Battery level: 13%
SW Version: V52110b
Mode: Emergency
Initializing flash...OK
Platform: msm8952
SW version: LGV521AT-01-V10b-310-260-APR-17-2016-ARB00+0
Android version: 6.0.1
LAF Version: 1.1
Product ID: CW85S161017001066
IMEI: 356286-07-223995-2
Target operator: TMO
Hardware: rev_10
Performed by 2.8.9.8 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM391
Selected model: V521
Please, put the phone into download mode manually (Power phone OFF
(reconnect battery), press and hold "Vol+" button and connect the cable
(or P999 cable)).
Reading info...
Model ID: LG-V521
IMEI: 356286-07-223995-2
Android version: 6.0.1
Battery level: 14%
SW Version: V52110b
Mode: Emergency
Initializing flash...OK
Platform: msm8952
SW version: LGV521AT-01-V10b-310-260-APR-17-2016-ARB00+0
Android version: 6.0.1
LAF Version: 1.1
Product ID: CW85S161017001066
IMEI: 356286-07-223995-2
Target operator: TMO
Hardware: rev_10
Reading partitions...OK
Detecting writing method...OK
Resetting FRP Lock...OK
Resetting FRP lock successfully completed!
If the phone hang on logo or is restarting afetr performing the operation,
please re-flash it using the same or higher version of firmware
Performed by 2.8.9.8 Software version.
Last edited by Octopus box; 11-19-2018 at 07:50.
  Reply With Quote
The Following User Says Thank You to ..:::GSM CLUB™:::.. For This Useful Post:
Old 11-19-2018, 15:14   #5747 (permalink)
Product Supporter
 
dr_moosavi's Avatar
 
Join Date: Jul 2008
Location: iran-shiraz
Posts: 730
Member: 814775
Status: Offline
Sonork: 100.1587334
Thanks Meter: 973
H960A FRP Lock successfully reseted
H960A FRP Lock
Code:
1/19/2018 1:25:08 AM > Checking data...11/19/2018 1:25:09 AM > OK
11/19/2018 1:25:09 AM > Platform: LG Qualcomm
11/19/2018 1:25:09 AM > Selected port: COM5
11/19/2018 1:25:09 AM > Selected model: H960A
11/19/2018 1:25:09 AM > Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
11/19/2018 1:25:09 AM > Reading info...
11/19/2018 1:25:11 AM > Model ID: LG-H960A
11/19/2018 1:25:11 AM > IMEI: 356210-07-xxxxxx-9
11/19/2018 1:25:11 AM > Android version: 7.0
11/19/2018 1:25:11 AM > Battery level: 95%
11/19/2018 1:25:11 AM > SW Version: 11/19/2018 1:25:11 AM > H96030c
11/19/2018 1:25:11 AM > Mode: Emergency
11/19/2018 1:25:11 AM > Initializing flash...11/19/2018 1:25:13 AM > OK
11/19/2018 1:25:14 AM > Platform: msm8992
11/19/2018 1:25:14 AM > SW version: 11/19/2018 1:25:14 AM > LGH960AAT-00-V30c-EUR-XX-MAR-23-2018+0
11/19/2018 1:25:14 AM > Android version: 7.0
11/19/2018 1:25:14 AM > LAF Version: 1.1
11/19/2018 1:25:14 AM > Product ID: YE02S160112001031
11/19/2018 1:25:14 AM > IMEI: 356210-07-024596-9
11/19/2018 1:25:14 AM > Target operator: GLOBAL
11/19/2018 1:25:14 AM > Hardware: rev_10
11/19/2018 1:25:14 AM > Reset FRP operation for H960A will delete all user data on the phone (contacts, pictures and others)! 
Do You want to continue?
11/19/2018 1:25:17 AM > Reading partitions...11/19/2018 1:25:18 AM > OK
11/19/2018 1:25:18 AM > Detecting writing method...11/19/2018 1:25:18 AM > OK
11/19/2018 1:25:18 AM > Resetting FRP Lock...
11/19/2018 1:25:18 AM > Writing loader...
11/19/2018 1:25:18 AM > Step 1...
11/19/2018 1:25:18 AM > Step 2...
11/19/2018 1:25:18 AM > Step 3...
11/19/2018 1:25:18 AM > Step 4...
11/19/2018 1:25:18 AM > Step 5...
11/19/2018 1:25:18 AM > Step 6...
11/19/2018 1:25:18 AM > Step 7...
11/19/2018 1:25:18 AM > Step 8...
11/19/2018 1:25:18 AM > Step 9...
11/19/2018 1:25:18 AM > Step 10...11/19/2018 1:25:19 AM > OK
11/19/2018 1:25:19 AM > Writing userdata...
11/19/2018 1:25:34 AM > Writing cmd...
11/19/2018 1:25:34 AM > reading cmd...
11/19/2018 1:25:34 AM > Read: EXEC...11/19/2018 1:25:34 AM > OK
11/19/2018 1:25:34 AM > Formating encrypt...11/19/2018 1:25:38 AM > OK
11/19/2018 1:25:38 AM > Restoring loader...11/19/2018 1:25:38 AM > OK
11/19/2018 1:25:38 AM > Resetting FRP lock successfully completed!
11/19/2018 1:25:39 AM > Rebooting phone...
11/19/2018 1:25:39 AM > To complete the operation, please make Factory Reset (Go to "Settings" -> "General" -> "Backup & reset" -> "Factory data reset", press "Reset phone" and "Erase everything" buttons).
11/19/2018 1:25:39 AM > Performed by 2.8.9.8 Software version.
11/19/2018 1:25:39 AM > Elapsed Time: 12:00:32 AM
  Reply With Quote
The Following User Says Thank You to dr_moosavi For This Useful Post:
Old 11-19-2018, 16:09   #5748 (permalink)
Freak Poster
 
Join Date: Feb 2007
Location: usa
Posts: 240
Member: 444048
Status: Offline
Thanks Meter: 52
H811 (V20v) successfully unlocked
Welcome to Octoplus/Octopus Box LG Software version 2.8.9.8
--------------------------------------------------------------------------------
Connecting to server ...OK

Authorizing...OK
Checking balance...OK
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM528
Selected model: H811
Reading info...
Model ID: LG-H811
IMEI: 35911
Android version: 6.0
Battery level: 100%
SW Version: H81120v
Mode: Normal
Firmware compiled date: Jan 04 2017
Firmware compiled time: 07:00:00
Firmware released date: Apr 25 2017
Firmware released time: 10:25:33
SW Version: MPSS.BO.2.5.c3-00109-M8992FAAAANAZM-1.83273.1
IMEI: 359105-06-SPC: 000000
Performed by 2.8.9.8 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM528
Selected model: H811
Reading info...
Model ID: LG-H811
IMEI: 359
Android version: 6.0
Battery level: 100%
SW Version: H81120v
Mode: Normal
Firmware compiled date: Jan 04 2017
Firmware compiled time: 07:00:00
Firmware released date: Apr 25 2017
Firmware released time: 10:25:33
SW Version: MPSS.BO.2.5.c3-00109-M8992FAAAANAZM-1.83273.1
IMEI: 35912-
SPC: 000000
Checking root access...
Initializing ADB...OK
ADB Server was found. Trying to kill...
Waiting for phone...Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in
PC Device Manager.
Performed by 2.8.9.8 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM528
Selected model: H811
Reading info...
Model ID: LG-H811
IMEI: 3591
Android version: 6.0
Battery level: 100%
SW Version: H81120v
Mode: Normal
Firmware compiled date: Jan 04 2017
Firmware compiled time: 07:00:00
Firmware released date: Apr 25 2017
Firmware released time: 10:25:33
SW Version: MPSS.BO.2.5.c3-00109-M8992FAAAANAZM-1.83273.1
IMEI: 35910
SPC: 000000
Checking root access...
Initializing ADB...OK
Waiting for phone...OK
Phone is already rooted.
--------------------------------------------------------------------------------
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 300 credits.
To perform "Unlock" operation you need to have 100 credits.
Sending exploit...OK
Executing exploit...OK
Sending data to server...OK
Calculating. Please Wait...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.8.9.8 Software version.
Last edited by Octopus box; 11-19-2018 at 17:36.
  Reply With Quote
The Following User Says Thank You to hussein1 For This Useful Post:
Old 11-19-2018, 17:05   #5749 (permalink)
Banned
 
Join Date: Jan 2017
Location: Algeria DZ
Posts: 1,666
Member: 2669781
Status: Offline
Thanks Meter: 1,839
Thumbs up D855_{BOOT AREA REPAIR}_Successfully done
full logs of the operation
Quote:
Code:
model settings:
Interface : Usb
brand     : Lg
model     : D855
srf       : C:/program files (x86)/octoplus pro jtag software/firmwarefolder/lg_d855_usb.srf
core      : Qualcomm msm8974ac
loader    : Lg_loader_v1

connecting...
Cpu name     : Qualcomm msm8974ac 
flash id     : 450001 
device       : Sandisk emmc sdw16g
page size    : 512 b
block size   : 512 b
block count  : 30777344
size         : 14.68 gb (15028.00 mb)
connect successful.
---------------------------------------------------------------
sw: 1.6.7; fw: .
Repairing from file "c:/program files (x86)/octoplus pro jtag software/firmwarefolder/lg_d855_usb.srf".
Write data verification is disabled.
Writing gpt partition...	Done.
Writing sbl1 partition...	Done.
Writing dbi partition...	Done.
Writing ddr partition...	Done.
Writing aboot partition...	Done.
Writing rpm partition...	Done.
Writing tz partition...	Done.
Writing pad partition...	Done.
Writing boot partition...	Done.
Writing misc partition...	Done.
Writing laf partition...	Done.

Smart repair is successfully complete.
Sw: 1.6.7; fw: .
Disconnected.
full flash and update to d855 v30o:
Code:
--------------------------------------------------------------------------------
checking data...ok
platform: Lg qualcomm
selected port: Com330
selected model: D855
reading info...
Could not detect mode!
Performed by 2.8.9 software version.
--------------------------------------------------------------------------------
checking data...ok
platform: Lg qualcomm
selected port: Com582
selected model: D855
reading info...
Mode: Emergency
initializing flash...ok
platform: Msm8974
sw version: Lgd855at-00-v20f-cis-xx-dec-22-2014-16g+0
android version: 5.0
laf version: 1.1
product id: Pt02s140617002080
imei: 354153-06-296035-5
target operator: Global
hardware: Rev_10
--------------------------------------------------------------------------------
writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean pc (without any installed drivers for other qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
opening "d85530o_00_0425.oct"...ok
setting options...ok
reading partitions...ok
formating userdata...ok
formating encrypt...ok
writing primarygpt...ok
writing modem...ok
writing sbl1...ok
writing dbi...ok
writing aboot...ok
writing rpm...ok
writing tz...ok
writing boot...ok
writing persist...ok
writing recovery...ok
writing laf...ok
writing factory...ok
writing system...ok
writing cust...ok
writing backupgpt...ok
reading partitions...ok
formating rct...ok
formating mpt...ok
finalizing...ok
writing firmware done!
Performed by 2.8.9 software version.
--------------------------------------------------------------------------------
Last edited by Octopus box; 11-19-2018 at 17:38.
  Reply With Quote
The Following User Says Thank You to lyes_albert For This Useful Post:
Old 11-20-2018, 11:21   #5750 (permalink)
Banned
 
Join Date: Jan 2017
Location: Algeria DZ
Posts: 1,666
Member: 2669781
Status: Offline
Thanks Meter: 1,839
LG V10_{HANG AT LOGO}_Successfully Solved
Full logs of the operation/

Code:
20/11/2018 11:06:21 > --------------------------------------------------------------------------------
20/11/2018 11:06:21 > Checking data...20/11/2018 11:06:21 > OK
20/11/2018 11:06:21 > Platform: LG Qualcomm
20/11/2018 11:06:21 > Selected port: COM587
20/11/2018 11:06:21 > Selected model: H900
20/11/2018 11:06:21 > Reading info...
20/11/2018 11:06:24 > Model ID: LG-H900
20/11/2018 11:06:24 > IMEI: 
20/11/2018 11:06:24 > Android version: 
20/11/2018 11:06:24 > Battery level: 100%
20/11/2018 11:06:24 > SW Version: 20/11/2018 11:06:24 > H90021w
20/11/2018 11:06:26 > Mode: Emergency
20/11/2018 11:06:26 > Initializing flash...20/11/2018 11:06:27 > OK
20/11/2018 11:06:28 > Platform: msm8992
20/11/2018 11:06:28 > SW version: 20/11/2018 11:06:28 > 
20/11/2018 11:06:28 > Android version: 6.0
20/11/2018 11:06:29 > LAF Version: 1.1
20/11/2018 11:06:29 > Product ID: 
20/11/2018 11:06:29 > IMEI: 
20/11/2018 11:06:29 > Target operator: ATT
20/11/2018 11:06:29 > Hardware: rev_10
20/11/2018 11:06:29 > Opening "WEB_H90021w_00_0921.kdz"...20/11/2018 11:06:29 > OK
20/11/2018 11:06:29 > Firmware version: H90021w
20/11/2018 11:06:29 > Firmware model: LG-H900
20/11/2018 11:06:29 > Firmware type: 0100
20/11/2018 11:06:29 > --------------------------------------------------------------------------------
20/11/2018 11:06:29 > Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
20/11/2018 11:06:29 > --------------------------------------------------------------------------------
20/11/2018 11:06:31 > Prepairing firmware...20/11/2018 11:06:32 > OK
20/11/2018 11:06:32 > Setting options...20/11/2018 11:06:34 > OK
20/11/2018 11:06:34 > Reading partitions...20/11/2018 11:06:35 > OK
20/11/2018 11:06:35 > Formating USERDATA...20/11/2018 11:06:39 > OK
20/11/2018 11:06:39 > Formating ENCRYPT...20/11/2018 11:06:43 > OK
20/11/2018 11:06:43 > Writing 1/67 PrimaryGPT_0.bin...20/11/2018 11:06:43 > OK
20/11/2018 11:06:43 > Writing 2/67 modem_16384.bin...20/11/2018 11:06:52 > OK
20/11/2018 11:06:52 > Writing 3/67 pmic_196608.bin...20/11/2018 11:06:52 > OK
20/11/2018 11:06:52 > Writing 4/67 sbl1_197632.bin...20/11/2018 11:06:52 > OK
20/11/2018 11:06:52 > Writing 5/67 tz_199680.bin...20/11/2018 11:06:53 > OK
20/11/2018 11:06:53 > Writing 6/67 sdi_201728.bin...20/11/2018 11:06:53 > OK
20/11/2018 11:06:53 > Writing 7/67 hyp_202752.bin...20/11/2018 11:06:53 > OK
20/11/2018 11:06:53 > Writing 8/67 rpm_203776.bin...20/11/2018 11:06:53 > OK
20/11/2018 11:06:53 > Writing 9/67 aboot_204800.bin...20/11/2018 11:06:53 > OK
20/11/2018 11:06:53 > Writing 10/67 sbl1bak_208896.bin...20/11/2018 11:06:54 > OK
20/11/2018 11:06:54 > Writing 11/67 pmicbak_210944.bin...20/11/2018 11:06:54 > OK
20/11/2018 11:06:54 > Writing 12/67 hypbak_211968.bin...20/11/2018 11:06:54 > OK
20/11/2018 11:06:54 > Writing 13/67 tzbak_212992.bin...20/11/2018 11:06:54 > OK
20/11/2018 11:06:54 > Writing 14/67 rpmbak_215040.bin...20/11/2018 11:06:54 > OK
20/11/2018 11:06:54 > Writing 15/67 abootbak_216064.bin...20/11/2018 11:06:55 > OK
20/11/2018 11:06:55 > Writing 16/67 sdibak_220160.bin...20/11/2018 11:06:55 > OK
20/11/2018 11:06:55 > Writing 17/67 persist_278528.bin...20/11/2018 11:06:55 > OK
20/11/2018 11:06:55 > Writing 18/67 sec_360448.bin...20/11/2018 11:06:56 > OK
20/11/2018 11:06:56 > Writing 20/67 laf_376832.bin...20/11/2018 11:07:00 > OK
20/11/2018 11:07:00 > Writing 21/67 boot_475136.bin...20/11/2018 11:07:05 > OK
20/11/2018 11:07:05 > Writing 22/67 recovery_557056.bin...20/11/2018 11:07:10 > OK
20/11/2018 11:07:10 > Writing 23/67 raw_resources_737280.bin...20/11/2018 11:07:10 > OK
20/11/2018 11:07:10 > Writing 24/67 raw_resourcesbak_745472.bin...20/11/2018 11:07:11 > OK
20/11/2018 11:07:11 > Writing 25/67 factory_753664.bin...20/11/2018 11:07:11 > OK
20/11/2018 11:07:11 > Writing 26/67 system_901120.bin...20/11/2018 11:07:26 > OK
20/11/2018 11:07:26 > Writing 27/67 system_1165448.bin...20/11/2018 11:07:41 > OK
20/11/2018 11:07:41 > Writing 28/67 system_1429456.bin...20/11/2018 11:07:56 > OK
20/11/2018 11:07:56 > Writing 29/67 system_1689736.bin...20/11/2018 11:07:56 > OK
20/11/2018 11:07:56 > Writing 30/67 system_1693784.bin...20/11/2018 11:08:10 > OK
20/11/2018 11:08:10 > Writing 31/67 system_1953744.bin...20/11/2018 11:08:25 > OK
20/11/2018 11:08:25 > Writing 32/67 system_2214024.bin...20/11/2018 11:08:25 > OK
20/11/2018 11:08:25 > Writing 33/67 system_2218072.bin...20/11/2018 11:08:40 > OK
20/11/2018 11:08:40 > Writing 34/67 system_2478032.bin...20/11/2018 11:08:55 > OK
20/11/2018 11:08:55 > Writing 35/67 system_2738312.bin...20/11/2018 11:08:55 > OK
20/11/2018 11:08:55 > Writing 36/67 system_2742360.bin...20/11/2018 11:09:10 > OK
20/11/2018 11:09:10 > Writing 37/67 system_3002320.bin...20/11/2018 11:09:24 > OK
20/11/2018 11:09:24 > Writing 38/67 system_3262600.bin...20/11/2018 11:09:24 > OK
20/11/2018 11:09:24 > Writing 39/67 system_3266648.bin...20/11/2018 11:09:38 > OK
20/11/2018 11:09:38 > Writing 40/67 system_3526608.bin...20/11/2018 11:09:53 > OK
20/11/2018 11:09:53 > Writing 41/67 system_3788752.bin...20/11/2018 11:10:07 > OK
20/11/2018 11:10:07 > Writing 42/67 system_4050896.bin...20/11/2018 11:10:22 > OK
20/11/2018 11:10:22 > Writing 43/67 system_4313040.bin...20/11/2018 11:10:37 > OK
20/11/2018 11:10:37 > Writing 44/67 system_4575184.bin...20/11/2018 11:10:51 > OK
20/11/2018 11:10:51 > Writing 45/67 system_4837328.bin...20/11/2018 11:11:05 > OK
20/11/2018 11:11:05 > Writing 46/67 system_5099472.bin...20/11/2018 11:11:19 > OK
20/11/2018 11:11:19 > Writing 47/67 system_5361616.bin...20/11/2018 11:11:33 > OK
20/11/2018 11:11:33 > Writing 48/67 system_5623760.bin...20/11/2018 11:11:48 > OK
20/11/2018 11:11:48 > Writing 49/67 system_5885904.bin...20/11/2018 11:12:03 > OK
20/11/2018 11:12:03 > Writing 50/67 system_6148048.bin...20/11/2018 11:12:17 > OK
20/11/2018 11:12:17 > Writing 51/67 system_6410192.bin...20/11/2018 11:12:31 > OK
20/11/2018 11:12:32 > Writing 52/67 system_6672336.bin...20/11/2018 11:12:46 > OK
20/11/2018 11:12:46 > Writing 53/67 system_6934480.bin...20/11/2018 11:13:00 > OK
20/11/2018 11:13:00 > Writing 54/67 system_7196624.bin...20/11/2018 11:13:10 > OK
20/11/2018 11:13:10 > Writing 55/67 system_7454720.bin...20/11/2018 11:13:10 > OK
20/11/2018 11:13:10 > Writing 56/67 system_7456904.bin...20/11/2018 11:13:10 > OK
20/11/2018 11:13:10 > Writing 57/67 system_7460952.bin...20/11/2018 11:13:23 > OK
20/11/2018 11:13:23 > Writing 58/67 system_7979008.bin...20/11/2018 11:13:23 > OK
20/11/2018 11:13:23 > Writing 59/67 system_7981192.bin...20/11/2018 11:13:24 > OK
20/11/2018 11:13:24 > Writing 60/67 system_7985240.bin...20/11/2018 11:13:37 > OK
20/11/2018 11:13:37 > Writing 61/67 system_8503296.bin...20/11/2018 11:13:38 > OK
20/11/2018 11:13:38 > Writing 62/67 system_8765440.bin...20/11/2018 11:13:38 > OK
20/11/2018 11:13:38 > Writing 63/67 system_9027584.bin...20/11/2018 11:13:38 > OK
20/11/2018 11:13:38 > Writing 64/67 system_9289728.bin...20/11/2018 11:13:38 > OK
20/11/2018 11:13:38 > Writing 65/67 system_9551872.bin...20/11/2018 11:13:38 > OK
20/11/2018 11:13:38 > Writing 66/67 system_9554936.bin...20/11/2018 11:13:45 > OK
20/11/2018 11:13:45 > Writing 67/67 BackupGPT_122141696.bin...20/11/2018 11:13:45 > OK
20/11/2018 11:13:45 > Reading partitions...20/11/2018 11:13:46 > OK
20/11/2018 11:13:46 > Formating RCT...20/11/2018 11:13:50 > OK
20/11/2018 11:13:50 > Formating MPT...20/11/2018 11:13:54 > OK
20/11/2018 11:13:54 > Finalizing...20/11/2018 11:13:56 > OK
20/11/2018 11:13:56 > Writing firmware done!
20/11/2018 11:13:56 > Performed by 2.8.9 Software version.
20/11/2018 11:13:56 > Elapsed Time: 00:07:36
20/11/2018 11:15:42 > --------------------------------------------------------------------------------
Last edited by Octopus box; 11-20-2018 at 11:55.
  Reply With Quote
The Following User Says Thank You to lyes_albert For This Useful Post:
Old 11-20-2018, 11:52   #5751 (permalink)
Banned
 
Join Date: Jan 2017
Location: Algeria DZ
Posts: 1,666
Member: 2669781
Status: Offline
Thanks Meter: 1,839
Thumbs up LG-H900_{Security Repair}_Successfully done...
Full logs of the operation/
Quote:
Code:
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM587
Selected model: H900
Reading info...
Model ID: LG-H900
IMEI: 000000-00-000000-0
Android version: 6.0
Battery level: 84%
SW Version: H90021w
Mode: Normal
Firmware compiled date: May 18 2016
Firmware compiled time: 03:00:00
Firmware released date: Sep 21 2016
Firmware released time: 17:31:24
SW Version: MPSS.BO.2.5.c10.1-00024-M8992FAAAANAZM-
1.55482.1.56599.1
SPC: 000000
Fixing IMEI...
New IMEI A: 353074-07-217707-2
Finalizing...OK
IMEI successfully fixed!
Rebooting phone...
Performed by 2.8.9 Software version.
  Reply With Quote
The Following User Says Thank You to lyes_albert For This Useful Post:
Old 11-20-2018, 13:03   #5752 (permalink)
Banned
 
Join Date: Jan 2017
Location: Algeria DZ
Posts: 1,666
Member: 2669781
Status: Offline
Thanks Meter: 1,839
Thumbs up LG-A390_{Network Lock}_Successfully Removed...
Full logs of the Operation/ OLD BUT GOLD
Quote:
Code:
20/11/2018 12:32:48 > --------------------------------------------------------------------------------
20/11/2018 12:32:48 > Checking data...20/11/2018 12:32:48 > OK
20/11/2018 12:32:48 > Platform: LG MTK
20/11/2018 12:32:48 > Selected port: COM587
20/11/2018 12:32:48 > Selected baudrate: 115200
20/11/2018 12:32:48 > Selected model: A390
20/11/2018 12:32:48 > Selected USB connection type
20/11/2018 12:32:49 > Please, disconnect battery and connect cable...20/11/2018 12:33:15 > OK
20/11/2018 12:33:15 > Phone found.
20/11/2018 12:33:17 > Setting power state...20/11/2018 12:33:17 > OK
20/11/2018 12:33:17 > Sending loader...20/11/2018 12:33:18 > OK
20/11/2018 12:33:18 > Synchronizing with loader...20/11/2018 12:33:18 > OK
20/11/2018 12:33:18 > Detecting NOR flash chip...20/11/2018 12:33:18 > OK
20/11/2018 12:33:18 > Detecting NAND flash chip...20/11/2018 12:33:18 > OK
20/11/2018 12:33:18 > Reading info...20/11/2018 12:33:19 > OK
20/11/2018 12:33:19 > Checking security...20/11/2018 12:33:21 > OK
20/11/2018 12:33:21 > --------------------------------------------------------------------------------
20/11/2018 12:33:21 > IMEI A: 359546-06-888005-2
20/11/2018 12:33:21 > IMEI B: 359546-06-888006-0
20/11/2018 12:33:21 > Bluetooth address: 88:07:4B:92:14:3C
20/11/2018 12:33:21 > NAND flash chip: AMD/Spansion
20/11/2018 12:33:21 > NAND size: 128 Mb
20/11/2018 12:33:21 > NAND page size: 2048 b
20/11/2018 12:33:21 > NAND spare size: 64 b
20/11/2018 12:33:21 > NAND pages per block: 64
20/11/2018 12:33:21 > --------------------------------------------------------------------------------
20/11/2018 12:33:21 > Reading codes...20/11/2018 12:33:23 > OK
20/11/2018 12:33:23 > NCK: 4574 9415 1209 6900
20/11/2018 12:33:23 > NSCK: 0084 3872 7984 4399
20/11/2018 12:33:23 > SPCK: 3746 0554 9608 2140
20/11/2018 12:33:23 > CCK: 5501 9204 1702 9657
20/11/2018 12:33:23 > SIM: 0269 5050 3534 7350
20/11/2018 12:33:23 > To finish the operation, please perform the following steps: 
1. Insert the original SIM card or Motorola Test card and type 2945#*390#
2. Enter code.
20/11/2018 12:33:23 > Performed by 2.8.9 Software version.
20/11/2018 12:33:23 > Elapsed Time: 00:00:35
Last edited by Octopus box; 11-20-2018 at 13:53.
  Reply With Quote
The Following User Says Thank You to lyes_albert For This Useful Post:
Old 11-21-2018, 00:22   #5753 (permalink)
No Life Poster
 
Join Date: Jan 2010
Location: izmir
Posts: 840
Member: 1210902
Status: Offline
Thanks Meter: 231
Talking M700Y Q6 Repair latest security android 8.1 successfully done
Checking data...OK
Platform: LG Qualcomm
Selected port: COM108
Selected model: M700Y
Reading info...
Model ID: LG-M700Y
IMEI: 358xxx-xx-xxxxxx-x
Android version: 8.1.0
Battery level: 90%
SW Version: M70020a
Mode: Normal
Firmware compiled date: Jun 25 2018
Firmware compiled time: 23:00:00
Firmware released date: Aug 24 2018
Firmware released time: 13:45:14
SW Version: MPSS.TA.2.3.c4-00034-8940_GEN_PACK-
1.154382.0.156550.1
IMEI: 3587xx-xx-xxxxxx-x
Bluetooth address: B4:xx:xx:xx:xx:xx
Wi-Fi MAC address: 10:xx:xx:xx:xx:xx
SPC: 000000
Fixing IMEI...
New IMEI: 35xxxx-xx-xxxxxx-x
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "M700Y_358xxxxxxxxxxxxx_21-11-2018_01-52-34.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Reading security area...Failed!
LAF Error: 80000119.
Writing security area...OK
Switching to Normal mode...
Found model LGM700YA* ˙h at port COM108
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
IMEI successfully fixed!
Rebooting phone...
Last edited by Octopus box; 11-21-2018 at 06:30.
  Reply With Quote
The Following User Says Thank You to master353535 For This Useful Post:
Old 11-21-2018, 01:59   #5754 (permalink)
No Life Poster
 
Join Date: Jun 2016
Location: UK
Posts: 613
Member: 2581848
Status: Offline
Thanks Meter: 249
LS997 successfully unlocked
Checking data...OK
Platform: LG Qualcomm
Selected port:
Selected model: LS997
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.OK
Model ID: LG-LS997
Phone firmware version: LGLS997AT-00-VZVD-SPR-US-FEB-19-2018-ARB01+00
Kernel version: 3.18.31-perf-gde288c6-00014-g03cb203 (lgmobile@LGEACI6R5) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 19 14:41:26 KST 201
Android version: 7.0
Hardware: Qualcomm Technologies, Inc MSM8996 AArch64 Processor rev 2 (aarch64)
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.8.9.8 Software version.
Last edited by Octopus box; 11-21-2018 at 06:32.
  Reply With Quote
The Following User Says Thank You to Dzomega For This Useful Post:
Old 11-21-2018, 11:54   #5755 (permalink)
No Life Poster
 
sr8787's Avatar
 
Join Date: Jun 2008
Location: Punjabi University India
Posts: 1,473
Member: 788946
Status: Offline
Sonork: 100.1682685
Thanks Meter: 502
Thumbs up LG Cricket M153 network and FRP unlock successfully done
lg cricket M153 network and frp unlock done


FRP unlock done:






Network unlock done:





Thanks Octopus team
Last edited by Octopus box; 11-21-2018 at 12:10.
  Reply With Quote
The Following User Says Thank You to sr8787 For This Useful Post:
Old 11-21-2018, 16:44   #5756 (permalink)
No Life Poster
 
Dr_Wolodya's Avatar
 
Join Date: Jul 2004
Location: Ukraine
Age: 44
Posts: 2,727
Member: 75408
Status: Offline
Thanks Meter: 1,190
Unlock LG SP200 successfully done by converting it in to X210
Unlock LG SP200 successfully done by converting it in to X210.

Reading eeprom:
Code:
Checking data...OK
Platform: LG MTK
Selected port: COM3
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM711
Mode: Emergency
Initializing flash...OK
Model ID: LG-SP200
Platform: mt6750
Android version: 7.1.2
SW version: SP20012a_01
LAF Version: 1.1
Product ID: VS02S180515002232
IMEI: 
Target operator: SPR
Hardware: rev_10
Battery level: 50%
Reading partitions...OKOK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 351980-09-836357-3
MEID: 351980-09-836357
Bluetooth address: 08:D4:6A:08:5F:63
Wi-Fi MAC address: 48:60:5F:6E:D5:40
SPC: 082584
--------------------------------------------------------------------------------
Selecting output file...OK
Destination file: "SP200_35198009836357_21-11-2018_16-15-53.EEP"
Reading EEPROM...OK
Performed by 2.8.9.8 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM3
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM711
Mode: Emergency
Initializing flash...OK
Model ID: LG-SP200
Platform: mt6750
Android version: 7.1.2
SW version: SP20012a_01
LAF Version: 1.1
Product ID: VS02S180515002232
IMEI: 
Target operator: SPR
Hardware: rev_10
Battery level: 50%
Reading partitions...OKOK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 351980-09-836357-3
MEID: 351980-09-836357
Bluetooth address: 08:D4:6A:08:5F:63
Wi-Fi MAC address: 48:60:5F:6E:D5:40
SPC: 082584
--------------------------------------------------------------------------------
Reading security area...OK
Backup saved to "SP200_351980098363573_21-11-2018_16-17-10.EEP"
Flashing with SP20013b_to_X210ULMA10d_for_unlock.oct (converting):
Code:
Opening "SP20013b_to_X210ULMA10d_for_unlock.oct"...OK
Setting options...OK
Reading partitions...OKOK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing preloader...OK
Writing pgpt...OK
Writing lk...OK
Writing lk2...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing logo...OK
Writing lo_bak_go...OK
Writing secro...OK
Writing tee1...OK
Writing tee2...OK
Writing rct...OK
Writing factory...OK
Writing efuse...OK
Writing md1img...OK
Writing md1dsp...OK
Writing md1arm7...OK
Writing md3img...OK
Writing system...OK
Writing lafbak...OK
Writing sgpt...OK
Writing ftm...OK
Writing cache...OK
Writing OP...OK
Writing userdata...OK
Formating RCT...OK
Finalizing...OK
Performed by 2.8.9.8 Software version.
Writing eeprom:
Code:
Checking data...OK
Platform: LG MTK
Selected port: COM714
Selected baudrate: 921600
Selected model: SP200
Selected USB connection type
Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
or
Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
Phone found at port COM711
Mode: Emergency
Initializing flash...OK
Model ID: LM-X210ULMA
Platform: mt6750
Android version: 7.1.2
SW version: LMX210ULMAAT-00-V10d-LAO-COM-MAR-16-2018-ARB00+0
LAF Version: 1.1
Product ID: 00000000000000000000000000000
IMEI: 
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OKOK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 350305-26-000000-1
MEID: 350305-26-000000
Bluetooth address: 00:05:C9:00:00:00
Wi-Fi MAC address: 00:00:00:00:00:00
SPC: 000000
--------------------------------------------------------------------------------
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...Failed!
Trying third method...OK
Opening "SP200_35198009836357_21-11-2018_16-15-53.eep"...OK
Writing EEPROM...OK
EEPROM succesfully repaired.
Performed by 2.8.9.8 Software version.
Source with all needed files.
  Reply With Quote
The Following 2 Users Say Thank You to Dr_Wolodya For This Useful Post:
Old 11-21-2018, 22:01   #5757 (permalink)
No Life Poster
 
Join Date: Feb 2015
Location: Jamaican
Posts: 1,708
Member: 2339843
Status: Offline
Thanks Meter: 1,450
Donate money to this user
Thumbs up <<<sp320 unlock and imei repair done by king octoplus>>>>
21/11/2018 10:45:52 AM > Checking data...21/11/2018 10:45:52 AM > OK
21/11/2018 10:45:52 AM > Platform: LG MTK
21/11/2018 10:45:52 AM > Selected port: COM24
21/11/2018 10:45:52 AM > Selected baudrate: 921600
21/11/2018 10:45:52 AM > Selected model: M320
21/11/2018 10:45:52 AM > Selected USB connection type
21/11/2018 10:45:54 AM > Power phone OFF, press and hold "Vol+" button and connect the cable
21/11/2018 10:46:01 AM > Phone found at port COM25
21/11/2018 10:46:05 AM > Mode: Emergency
21/11/2018 10:46:05 AM > Initializing flash...21/11/2018 10:46:07 AM > OK
21/11/2018 10:46:08 AM > Model ID: LG-M320TV
21/11/2018 10:46:08 AM > Platform: mt6750
21/11/2018 10:46:08 AM > Android version: 7.1.1
21/11/2018 10:46:08 AM > SW version: LGM320TVAT-00-V12c-LAO-COM-APR-09-2018-ARB00+0
21/11/2018 10:46:08 AM > LAF Version: 1.1
21/11/2018 10:46:08 AM > Product ID: 00000000000000000000000000000
21/11/2018 10:46:08 AM > IMEI: 350305-26-000000-1
21/11/2018 10:46:08 AM > Target operator: LAO
21/11/2018 10:46:08 AM > Hardware: rev_10
21/11/2018 10:46:08 AM > Battery level: 4294967295%
21/11/2018 10:46:08 AM > Reading partitions...21/11/2018 10:46:08 AM > OK21/11/2018 10:46:08 AM > OK
21/11/2018 10:46:10 AM > Checking security...
21/11/2018 10:46:11 AM > Read 00800000...
21/11/2018 10:46:11 AM > Checking security passed!
21/11/2018 10:46:11 AM > --------------------------------------------------------------------------------
21/11/2018 10:46:11 AM > IMEI A: 350305-26-000000-1
21/11/2018 10:46:11 AM > IMEI B: 350305-26-000000-1
21/11/2018 10:46:11 AM > Bluetooth address: 00:05:C9:00:00:00
21/11/2018 10:46:11 AM > Wi-Fi MAC address: 00:00:00:00:00:00
21/11/2018 10:46:11 AM > SPC: 000000
21/11/2018 10:46:11 AM > --------------------------------------------------------------------------------
21/11/2018 10:46:11 AM > Detecting writing method...
21/11/2018 10:46:11 AM > LAF Error: 80000121.
21/11/2018 10:46:11 AM > Trying second method...
21/11/2018 10:46:19 AM > Trying third method...
21/11/2018 10:46:19 AM > Reading ramdisk...
21/11/2018 10:46:20 AM > Unpacking...
21/11/2018 10:46:20 AM > Starting MTK decompress...
21/11/2018 10:46:20 AM > Decompressing 0x0050F59C
21/11/2018 10:46:20 AM > Decompressing 0x002B2515
21/11/2018 10:46:20 AM > Set Writing params...
21/11/2018 10:46:20 AM > Set cmdSigData...
21/11/2018 10:46:20 AM > Set corrData...
21/11/2018 10:46:20 AM > Set cSeekData...
21/11/2018 10:46:20 AM > Set cFunc...
21/11/2018 10:46:20 AM > Eroor : Not found cFunc!21/11/2018 10:46:20 AM > Failed!
21/11/2018 10:46:20 AM > Trying third method...
21/11/2018 10:46:20 AM > Set Writing params AS QUALCOMM...
21/11/2018 10:46:20 AM > Set cmdSigData...
21/11/2018 10:46:20 AM > Set corrData...
21/11/2018 10:46:20 AM > Set cAddrSig...
21/11/2018 10:46:20 AM > Set cAddrFile...
21/11/2018 10:46:20 AM > Set cFlash...
21/11/2018 10:46:20 AM > Compose data...
21/11/2018 10:46:20 AM > Testing write method...
21/11/2018 10:46:20 AM > Reading 1b...
21/11/2018 10:46:20 AM > Sending sign...
21/11/2018 10:46:21 AM > Sending write cmd...
21/11/2018 10:46:21 AM > Writing cmd...
21/11/2018 10:46:21 AM > reading cmd...
21/11/2018 10:46:23 AM > reading cmd...
21/11/2018 10:46:26 AM > reading cmd...
21/11/2018 10:46:28 AM > reading cmd...
21/11/2018 10:46:30 AM > reading cmd...
21/11/2018 10:46:32 AM > reading cmd...
21/11/2018 10:46:34 AM > Reading all data...
21/11/2018 10:46:36 AM > Sending Open...
21/11/2018 10:46:37 AM > Reading 1b...
21/11/2018 10:46:37 AM > Sending sign...
21/11/2018 10:46:38 AM > Sending write cmd...
21/11/2018 10:46:38 AM > Writing cmd...
21/11/2018 10:46:38 AM > reading cmd...
21/11/2018 10:46:40 AM > reading cmd...
21/11/2018 10:46:42 AM > reading cmd...
21/11/2018 10:46:44 AM > reading cmd...
21/11/2018 10:46:47 AM > reading cmd...
21/11/2018 10:46:49 AM > reading cmd...
21/11/2018 10:46:51 AM > Reading all data...
21/11/2018 10:46:53 AM > Sending Open...21/11/2018 10:46:53 AM > OK
21/11/2018 10:46:53 AM > Fixing IMEI A...
21/11/2018 10:46:53 AM > New IMEI A: 358226-08-581049-6
21/11/2018 10:46:53 AM > Reading security area...21/11/2018 10:46:53 AM > OK
21/11/2018 10:46:53 AM > Backup saved to "M320_358226085810496_21-11-2018_10-46-53.EEP"
21/11/2018 10:46:53 AM > Patching security...21/11/2018 10:46:53 AM > OK
21/11/2018 10:46:53 AM > Writing security area...
21/11/2018 10:46:53 AM > Reading 1b...
21/11/2018 10:46:53 AM > Sending sign...
21/11/2018 10:46:54 AM > Sending write cmd...
21/11/2018 10:46:54 AM > Writing cmd...
21/11/2018 10:46:54 AM > reading cmd...
21/11/2018 10:46:57 AM > reading cmd...
21/11/2018 10:46:59 AM > reading cmd...
21/11/2018 10:47:01 AM > reading cmd...
21/11/2018 10:47:03 AM > reading cmd...
21/11/2018 10:47:05 AM > reading cmd...
21/11/2018 10:47:07 AM > Reading all data...
21/11/2018 10:47:09 AM > Sending Open...21/11/2018 10:47:10 AM > OK
21/11/2018 10:47:10 AM > Performed by 2.8.9.8 Software version.
21/11/2018 10:47:10 AM > Elapsed Time: 12:01:18 AM
Last edited by Octopus box; 11-22-2018 at 06:06.
  Reply With Quote
The Following User Says Thank You to ziggywong0305 For This Useful Post:
Old 11-22-2018, 07:00   #5758 (permalink)
No Life Poster
 
Join Date: Feb 2016
Location: GREAT Country Pakistan
Posts: 1,954
Member: 2537939
Status: Offline
Sonork: 100.1670350
Thanks Meter: 708
Thumbs up WORLD FIRST LG DM02H Flashing done
Possible only with Octopus team:

Code:
Welcome to Octoplus/Octopus Box LG Software version 2.8.9.10
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM2486
Selected model: DM-02H
Reading info...
Model ID: DM-02H
Incompatible model ID!
IMEI: 357031-***********
Android version: 6.0.1
Battery level: 10%
SW Version: DM02H10g
Mode: Emergency
Initializing flash...OK
Platform: msm8937
SW version: LGDM02HAT-00-V10g-440-10-DEC-13-2017+0
Android version: 6.0.1
LAF Version: 1.1
Product ID: PT02S160613000736
IMEI: 357031-07-045564-1
Target operator: DCM
Hardware: rev_10
Performed by 2.8.9.10 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM2486
Selected model: DM-02H
Reading info...
Model ID: DM-02H
Incompatible model ID!
IMEI: 357031-***********
Android version: 6.0.1
Battery level: 10%
SW Version: DM02H10g
Mode: Emergency
Initializing flash...OK
Platform: msm8937
SW version: LGDM02HAT-00-V10g-440-10-DEC-13-2017+0
Android version: 6.0.1
LAF Version: 1.1
Product ID: PT02S160613000736
IMEI: 357031-07-045564-1
Target operator: DCM
Hardware: rev_10
Opening "LGDM02HAT-00-V10g-440-10-DEC-13-2017+0.tot"...OK
Firmware version: LGDM02HAT-00-V10g-440-10-DEC-13-2017+0
Firmware model: DM-02H
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
--------------------------------------------------------------------------------
Prepairing firmware...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing 1/41 PrimaryGPT...OK
Writing 2/41 modem...OK
Writing 3/41 sbl1...OK
Writing 4/41 sbl1bak...OK
Writing 5/41 rpm...OK
Writing 6/41 rpmbak...OK
Writing 7/41 tz...OK
Writing 8/41 tzbak...OK
Writing 9/41 dsp...OK
Writing 10/41 dsp...OK
Writing 13/41 sec...OK
Writing 14/41 aboot...OK
Writing 15/41 abootbak...OK
Writing 16/41 boot...OK
Writing 17/41 laf...OK
Writing 18/41 recovery...OK
Writing 19/41 recoverybak...OK
Writing 20/41 factory...OK
Writing 21/41 raw_resources...OK
Writing 22/41 raw_resourcesbak...OK
Writing 23/41 persist...OK
Writing 25/41 apdp...OK
Writing 26/41 msadp...OK
Writing 27/41 devcfg...OK
Writing 28/41 devcfgbak...OK
Writing 29/41 cmnlib...OK
Writing 30/41 cmnlibbak...OK
Writing 31/41 cmnlib64...OK
Writing 32/41 cmnlib64bak...OK
Writing 33/41 keymaster...OK
Writing 34/41 keymasterbak...OK
Writing 35/41 system...OK
Writing 36/41 system...OK
Writing 37/41 system...OK
Writing 38/41 system...OK
Writing 39/41 system...OK
Writing 40/41 system...OK
Writing 41/41 BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.9.10 Software version.
Last edited by Octopus box; 11-22-2018 at 07:23.
  Reply With Quote
The Following User Says Thank You to lerner_ For This Useful Post:
Old 11-22-2018, 15:22   #5759 (permalink)
No Life Poster
 
Sudan-Mobiles's Avatar
 
Join Date: May 2006
Location: Sudan
Posts: 1,672
Member: 281857
Status: Offline
Thanks Meter: 214
Thumbs up M150 v20n successfully unlocked
Checking data...OK
Platform: LG Qualcomm
Selected port: COM403
Selected model: M150
Reading info...
Model ID: LG-M150
IMEI: 353712-09-xxxxxx-8
Android version: 7.0
Battery level: 97%
SW Version: M15020n
Mode: Normal
Firmware compiled date: Jul 06 2017
Firmware compiled time: 04:00:00
Firmware released date: Aug 1 2018
Firmware released time: 19:49:16
SW Version: MPSS.JO.2.0.c1.2-00020-8909_GEN_PACK-
1.92496.1.104247.1
IMEI: 353712-09-xxxxx-8
Bluetooth address: B4:F1A:6B:C3:A9
Wi-Fi MAC address: B4:F1A4:F3:3B
SPC: 000000
Unlocking...
Initializing ADB...OK
Waiting for phone...OK
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: c95m1dt1
Authorizing...OK
Checking balance...OK
Checking operation...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 50 credits.
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "M150_35371209xxxxx78_22-11-2018_15-08-55.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reading security area...OK
Backup saved to "M150_35371209xxxxx8_22-11-2018_15-14-05.SEC"
Writing security area...OK
Switching to Normal mode...
Found model LGM150AT* ˙h `€ at port COM403
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: c95m1dt1
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Finalizing...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.8.9.9 Software version.
  Reply With Quote
The Following User Says Thank You to Sudan-Mobiles For This Useful Post:
Old 11-24-2018, 08:34   #5760 (permalink)
Freak Poster
 
gsm_rabby's Avatar
 
Join Date: Mar 2015
Location: kushtia
Age: 31
Posts: 476
Member: 2356568
Status: Offline
Sonork: 1663093
Thanks Meter: 126
Donate money to this user
Thumbs up K371 flashing and FRP Reset successfully done
K371 flashing and FRP Reset successfully done. Thanks to Octoplus LG Tool supporters.


FIRMWARE
https://drive.google.com/file/d/0B8G...JuSG1RU3M/view
Last edited by Octopus box; 11-24-2018 at 10:22.
  Reply With Quote
The Following 2 Users Say Thank You to gsm_rabby For This Useful Post:
Reply
Page 384 of 423 « First 284334374381382383 384 385386387394 Last »

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Post here successfully unlocked a2 phones 3lsheikh SETool2 10 03-04-2011 02:48
Successfully Unlock Z240 Phone Freeze jhepoy_org UST Pro II 13 12-02-2009 06:03
Successfully unlock BB5 phones with bb5king Mjabbar BB5KING 0 11-29-2008 14:13
Successfully unlock BB5 phones with bb5king Mjabbar BB5KING 2 11-26-2008 11:54
PB2 - Successfully unlocked LG phones CU/KU ... DOUHAL PolarBox 3 72 11-05-2008 18:21

 



All times are GMT +1. The time now is 22:29.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.51219 seconds with 10 queries

SEO by vBSEO