Post here successfully operations via NCK BOX / Dongle PREMIUM v2

[MOBICOM]

Wiko Sunset 2 unlocked as Wiko Goa, direct unlock

 Selected connection metod: META Mode
 Exe version: NCKDongle AndroidMTK 2.5.6.2
 Selected phone: Wiko Goa
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Curent Platform: MT6572
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected(8) : PreLoader USB VCOM Port (COM8) 
 Starting META mode, wait...
 Restarting, wait....
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 META Port Detected[126] USB VCOM (Android) (COM126) 
 USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&1&0002 
 Start sync target, waiting responce.....
 BaseBand CPU : MT6572, E01
 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P4
 HW_VER : TINNO72_WE_72_KK_HSPA_HW
 Phone imei[1] : 354682077366562
 Phone imei[2] : 354682077406863
 Start direct unlock[SIM1]
 Direct unlock done
 Start direct unlock[SIM2]
 Direct unlock done
 Clean Boot flag ok. 
 All done.

[zvrrr]

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: OT-985X
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6573
Phone must be off with battery inside.
Please insert USB cable now...
Detected(502) : MediaTek PreLoader USB VCOM (Android) (COM502)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[12] NCK Dongle USB Serial Port (COM12)
USB\VID_1BBB&PID_0005&MI_02\6&2EF6D9DC&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6573, E00
SW_VER : MAUI.11AMD.W11.37.SP.V27.P7
HW_VER : JRD73_GIN_MODEM_GEMINI2_HW
Phone imei[1] : 861568011087933
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.
All done.

[luzer]

Alcatel Pixi 4.5 (OT-5017A) code calculation ...

Exe Version: NCKdongle v17.4
IMEI checksum seems ok
Brand: Alcatel android
Model: OT-5017A
IMEI :01437900-------
Connecting to server please wait...

PID: TLGT1
SECRO: X1B0Q300BP10
NCK: Old: 3241776716 New: 9329956041776716
NSCK: Old: 1757696496 New: 1518842457696496
SPCK: Old: 1583418698 New: 1790377483418698
CCK: Old: 0100914332 New: 6814072200914332
CPCK: Old: 0866561593 New: 9426860466561593

Calculated by NCKServer.
!!!!Do not use this calculator for free codes distribution. !!!!
!!!!This violate our Terms of Use and card can be blocked. !!!!

--------------------------

[razib143]

 Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.6.4
 Selected phone: Vodafone Smart First 6
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM4)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) MICRON 0x50314a39344d 
 EMMC FW VERSION: 12:00:00:00:00:00:00:00
 EMMC CID: FE014E50314A39 : 000000000000000000
 EMMC UA SIZE: 0xe9800000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9b00000       [3.651 GB]
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : DA USB VCOM Port (COM5)
 Block Size: 512
 MODEL FROM PROINFO: V695-2AVDGB2
 SECRO FROM PROINFO: X8I0HE01AZ10
 IMEI marker was found in nvram

 OTP ADRESS: 0xffff0200      

 OTP IMEI[1]: 357773066736365
 Reading security, wait...
 SIM[1]: 
 Block1(N): Locked (remain:10) Code : 04560832 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Unlocking target...please wait.
 Unlock finished.
 Wait untill phone will start charging.
 All done.

[UzUnlocker]

MTS 972 Read codes done ...

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: OT-972
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM8)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6575_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e355530304d
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 1501004E355530 : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9420000 [3.645 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM15)

OTP IMEI : 862261021011346
Reading security, wait...

SECRO FW : X2A0CW06AB00
NCK: 18004807 : Locked
NSCK: 03384587 : Unlocked
SPCK: 03157233 : Unlocked
SIM: 02899996 : Unlocked
If lock counter is 0, make "Format UserData" from exe.

Simlock saved to : C:\NCK Dongle\AndroidMTK\simlock_backup\_X2A0CW06AB00_bac kup.nsb
Wait untill phone will start charging.

[UzUnlocker]

Megafon Login 3 PH Direc unlock done

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: Login 3
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
Detected(8) : PreLoader USB VCOM Port (COM8)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[131] MTK CDC Serial (COM131)
USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&2&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P25
HW_VER : ZZTENJ72_WE_72_M536_KK_HSPA_HW
Phone imei[1] : 862731021244303
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.

[UzUnlocker]

MTC Smart Run 4G Read codes done

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: MTC Smart Run 4G
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM271)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6752_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010051373253 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM272)
Block Size: 512
IMEI marker was found in nvram
IMEI[1] from NVRAM: 867700020005465
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:96) Code : 20155026
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.

[razib143]

 Action : Boot Info.
 Selected 0-By CPU:MT6571_NAND
 Exe version: NCKBox AndroidMTK 1.8.6.4
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM4)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6571_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
----------------------------------------------------
 NAND: (4Gb+2048Mb) [SAMSUNG] KA100O015B_BJTT 
 BOOT STYLE : NAND BOOT
 Size: 0x20000000       [0.500 GB]
 BlockSize: 2048 SpareSize: 64  BMT Blocks 80
 Searching partiton table, wait..
 [0]Part: 
idœ2.œ Begin: 0x316a60c0b000150 Len: 0x62010a84      
 [0]Part: Piogd(U Begin: 0x9cda07df6a203138 Len: 0xddaa03d8      
 [0]Part: iton˜1`” Begin: 0x6e100000842a3d03 Len: 0x1c070128      
 [0]Part: PRELOADER Begin: 0x0              Len: 0x100000        
 [1]Part: PRO_INFO Begin: 0x100000         Len: 0x100000        
 [2]Part: NVRAM Begin: 0x200000         Len: 0x300000        
 [3]Part: PROTECT_F Begin: 0x500000         Len: 0x300000        
 [4]Part: SECCFG Begin: 0x800000         Len: 0x40000         
 [5]Part: UBOOT Begin: 0x840000         Len: 0x80000         
 [6]Part: BOOTIMG Begin: 0x8c0000         Len: 0x600000        
 [7]Part: RECOVERY Begin: 0xec0000         Len: 0x600000        
 [8]Part: SEC_RO Begin: 0x14c0000        Len: 0x40000         
 [9]Part: MISC Begin: 0x1500000        Len: 0xc0000         
 [10]Part: LOGO Begin: 0x15c0000        Len: 0x100000        
 [11]Part: EXPDB Begin: 0x16c0000        Len: 0x200000        
 [12]Part: FAT Begin: 0x18c0000        Len: 0x1400000       
 [13]Part: ANDROID Begin: 0x2cc0000        Len: 0xf800000       
 [14]Part: CACHE Begin: 0x124c0000       Len: 0x180000        
 [15]Part: USRDATA Begin: 0x12640000       Len: 0xcb80000       
 [16]Part: BMTPOOL Begin: 0xffff0038       Len: 0x0             
 Offset: 0x1f19c000       Count: 17

 OTP ADRESS: 0xffff0200      
 Wait untill phone will start charging.
 All done.
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM4)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6571_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 256 MB  DRAM
----------------------------------------------------
 NAND: (4Gb+2048Mb) [SAMSUNG] KA100O015B_BJTT 
 BOOT STYLE : NAND BOOT
 Size: 0x20000000       [0.500 GB]
 BlockSize: 2048 SpareSize: 64  BMT Blocks 80
 Searching partiton table, wait..
 [0]Part: 
idœ2.œ Begin: 0x316a60c0b000150 Len: 0x62010a84      
 [0]Part: Piogd(U Begin: 0x9cda07df6a203138 Len: 0xddaa03d8      
 [0]Part: iton˜1`” Begin: 0x6e100000842a3d03 Len: 0x1c070128      
 [0]Part: PRELOADER Begin: 0x0              Len: 0x100000        
 [1]Part: PRO_INFO Begin: 0x100000         Len: 0x100000        
 [2]Part: NVRAM Begin: 0x200000         Len: 0x300000        
 [3]Part: PROTECT_F Begin: 0x500000         Len: 0x300000        
 [4]Part: SECCFG Begin: 0x800000         Len: 0x40000         
 [5]Part: UBOOT Begin: 0x840000         Len: 0x80000         
 [6]Part: BOOTIMG Begin: 0x8c0000         Len: 0x600000        
 [7]Part: RECOVERY Begin: 0xec0000         Len: 0x600000        
 [8]Part: SEC_RO Begin: 0x14c0000        Len: 0x40000         
 [9]Part: MISC Begin: 0x1500000        Len: 0xc0000         
 [10]Part: LOGO Begin: 0x15c0000        Len: 0x100000        
 [11]Part: EXPDB Begin: 0x16c0000        Len: 0x200000        
 [12]Part: FAT Begin: 0x18c0000        Len: 0x1400000       
 [13]Part: ANDROID Begin: 0x2cc0000        Len: 0xf800000       
 [14]Part: CACHE Begin: 0x124c0000       Len: 0x180000        
 [15]Part: USRDATA Begin: 0x12640000       Len: 0xcb80000       
 [16]Part: BMTPOOL Begin: 0xffff0038       Len: 0x0             
 Offset: 0x1f19c000       Count: 17
 Dumping data, wait.
 Value found, procesing[010c][00260000]
 Resetting phone.
 FORMAT NAND FLASH :  BEGIN: 0x11a20000       - LEN: 0x3c00000       
Format Range: 0X11A20000       ~ 0X1561FFFF      
Format Size: 480Mb

Bad Blocks: 0
Error Blocks: 1
Total Blocks: 480

Bad/Error Block Ratio: (0.208%)

 FORMAT NAND FLASH :  BEGIN: 0x15620000       - LEN: 0x9fa0000       
Format Range: 0X15620000       ~ 0X1F5BFFFF      
Format Size: 1.25Gb

Bad Blocks: 0
Error Blocks: 5
Total Blocks: 1277

Bad/Error Block Ratio: (0.392%)

 Wait untill phone will start charging.
 All done.

[paul allison]

Exe Version: NCKdongle v17.4
IMEI checksum seems ok
Brand: Huawei Phones
Model: ASCEND Y360-U23
IMEI: 866836026047290
NCK= 4606906485156387
-------------------------

[Naps]

sm-j200gu FRP ON problem done

Detecting phone, wait..
Detected: Modem (COM33)
Bypassing data, wait....
Bypass ok.
Reading Data,wait....
Done
Chipset: LSI3475
Data Found, processing...
Resetting FRP, wait..
FRP OFF... Done
Now you can wipe phone to remove remaining data...
Restarting Phone
Restart Ok
All Done
Done.
--------------------------
Log saved to:
logs\GT-B2100_frp_reset__1.txt

[sicko78]

Allview A6 Duo FRP lock done by choosing another Allview model, A5.

Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM63)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A4838473165 : 0000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM130)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x3e40000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.

[king gsm]

356257064930254
s/n 4013x-2gogtn3
unlok

[toufikmaroc]

unlock doro 715 ok select doro handle easy-410s read info by usb

USB Connection selected.
EXE VERSION: NCKBox MTK Tool 3.4
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM694
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM694)
BaseBand CPU : MT6253, E04
SW_VER : CANDLE-S03A_DORO715_L18FR_201_121213
HW_VER : CKT53_6432_E1_10A_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 359635040471278
User code(128) : 1234
SIMLOCK INFO[1]:
Block1(N) : Locked (remain:9) Code : 76284440
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked
META END OK.
All done.

[krimmo]

Switel s4015d success unlocked

Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x533130303034
EMMC FW VERSION: 08:00:00:00:00:00:00:00
EMMC CID: 70010053313030 : 000000000000000000
EMMC UA SIZE: 0xe4000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe4c00000 [3.574 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM24)
Block Size: 512
IMEI marker was found in nvram
IMEI[1] from NVRAM: 869758006561248
IMEI[2] from NVRAM: 868969010014527
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:4) Code : 11112222
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:5) Code : 11112222
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.

All done.

[zvrrr]

Selected connection metod: META Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: Kiss ll max
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
Detected(502) : PreLoader USB VCOM (Android) (COM502)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[182] Android Gadget VCOM Driver (COM182)
USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V36.P23
HW_VER : ZZTENJ72_WE_72_KK_HSPA_HW
Phone imei[1] : 866526028162961
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.
All done.