Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 271 - GSM-Forum

ky_bAttaUsAi · 11-13-2015, 15:36

HTC desire 320 successful Network lock removed.

Quote:

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.6.2
Selected phone: HTC 320
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6582
Phone must be off with battery inside.
Please insert USB cable now...
Detected(18) : PreLoader USB VCOM Port (COM18)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[89] BLU Aurora USB VCOM (Android) (COM89)
USB\VID_0BB4&PID_0005&MI_02\6&1F2F085E&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6582, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V42.F1.P9
HW_VER : CCI82_WE_UC81_KK_HSPA_HW
Phone imei[1] : 355036061962473
Phone imei[2] : 355036061962473
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

ekvinoks · 11-14-2015, 13:13

Samsung G130HN unlock no root required

PHONE SELECTED: SM-G130HN
Port: SAMSUNG Mobile USB Modem #8(COM68)
Phone Detected.
SM-G130HN
Model: SM-G130HN
Base: SM-N900
Version: G130HNXXU0ANI1/G130HNMBM0ANI1/G130HNXXU0ANI2/G130HNXXU0ANI1
PRD: SM2G130HZWNMBM
SN: RF1F91Z***
IMEI: 356134061******
SIMLOCK:LOCKED
Unlocking, wait.
Unlock Done.
If Phone Ask For Code, Enter 00000000.
For check lock use: *#7465625#

samwaiyne · 11-15-2015, 15:48

THIS IS GREAT UPDATE NCK TEAM

onz · 11-15-2015, 18:51

Quote:

Action : Format UserData.
Selected 0-By CPU:MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM (Android) (COM28)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6571_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 4096 SpareSize: 208 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM Port (COM23)
Searching partiton table, wait..
[0]Part: PRELOADER Begin: 0x0 Len: 0x100000
[1]Part: PRO_INFO Begin: 0x100000 Len: 0x100000
[2]Part: NVRAM Begin: 0x200000 Len: 0x300000
[3]Part: PROTECT_F Begin: 0x500000 Len: 0x300000
[4]Part: SECCFG Begin: 0x800000 Len: 0x40000
[5]Part: UBOOT Begin: 0x840000 Len: 0x80000
[6]Part: BOOTIMG Begin: 0x8c0000 Len: 0x600000
[7]Part: RECOVERY Begin: 0xec0000 Len: 0x600000
[8]Part: SEC_RO Begin: 0x14c0000 Len: 0x40000
[9]Part: MISC Begin: 0x1500000 Len: 0xc0000
[10]Part: LOGO Begin: 0x15c0000 Len: 0x100000
[11]Part: EXPDB Begin: 0x16c0000 Len: 0x200000
[12]Part: FAT Begin: 0x18c0000 Len: 0x1400000
[13]Part: ANDROID Begin: 0x2cc0000 Len: 0x10900000
[14]Part: CACHE Begin: 0x135c0000 Len: 0x180000
[15]Part: USRDATA Begin: 0x13740000 Len: 0xba40000
[16]Part: BMTPOOL Begin: 0xffff0038 Len: 0x0
Offset: 0x1f158000 Count: 17
Detecting format adress....wait!

FORMAT NAND FLASH : BEGIN: 0x135c0000 - LEN: 0x180000
FORMAT NAND FLASH : BEGIN: 0x13740000 - LEN: 0xba40000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
All done

wsmobile · 11-16-2015, 09:54

Phone must be on, USB debugging must be enabled.
If Phone ask for SU, allow.
Found Device, reading info..
Brand: Huawei
Model: HUAWEI Y550-L02
Build ID: HuaweiY550-L02
Platform ID: msm8916
OS version: 4.4.4
Build version: Y550-L02V100R001C346B247SP01
SU binary present.
Starting unlock, wait...
Using metod 3.
Reading simlock info, wait....
SIMLOCK[0]: Locked
SIMLOCK[1]: Unlocked
SIMLOCK[2]: Unlocked
Unlocking phone....
Write simlock succes.

Restarting phone, wait.....
If phone not restarted, please restart manually .
All done.

psubbiah · 11-16-2015, 21:29

alcatel onetouch a392a.JPG
thanks nck team

razib143 · 11-17-2015, 12:32

Vodafone Smart First 6 Direct Unlock done in flash mode..

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.2
Selected phone: OT-V695
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) MICRON 0x50314a39344d
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A3934 : 0000000000000000
EMMC UA SIZE: 0xe9800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9b00000 [3.651 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM5)
Block Size: 512
MODEL FROM PROINFO: V695-2BVDGB1
SECRO FROM PROINFO: X8I0HE01AZ10
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Reading security, wait...

IMEI[1] : 357773062435376
SIM[1]:
Block1(N): Locked (remain:0) Code : 09423645
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

bojadzic · 11-18-2015, 11:37

Unlock HTC 816g done (read code)---select htc 616

Phone imei[1] : 356064062542770
Phone imei[2] : 356064062569773
Simlock Info : Sim [1]
Block1[N] :Locked [remain:10] Code : 12005240
Block2[NS] :Unlocked Code: 56781234
Block3[SP] :Unlocked Code: 11112222
Block4[C] :Unlocked Code: 33334444
Block5[SIM]:Unlocked Code: 55556666
**************************************
Simlock Info : Sim [2]
Block1[N] :Unlocked Code : 12345678
Block2[NS] :Unlocked Code: 56781234
Block3[SP] :Unlocked Code: 11112222
Block4[C] :Unlocked Code: 33334444
Block5[SIM]:Unlocked Code: 55556666
**************************************

1.Power phone with unacepted simcard.
2.Type code code when phone ask about.
3.For advansed info power phone with original card.
4.Type *#*#3646633#*#* and from engeneering menu select SIMMELOCK

If phone relock after power off, enter unlock code and make wipe.
All done.

read info with other tool:

Reading Phone.
Detecting Phone...
Reading Phone Info...

Manufacturer: HTC
Model: HTC Desire 816G dual sim
Product Name: a5mgp_dug_htc_europe
Baseband:

MOLY.WR8.W1315.MD.WG.MP.V34.P21, 2014/11/10

18:03
CID: HTC__A07
Secure Status: S-ON
Root Status: NO!
--------------------------------------------

----------------
IMEI: 356064062542770
--------------------------------------------

----------------
Operation Done.

myciviczc · 11-19-2015, 00:14

Unlock Blu Jenny TV 2.8 using MTK Tool 3.4 (T266T)

I selected The Hero Jr S250

Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM16
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI: 354333068961751
Start read, wait....
Block1(N) : Locked (remain:0) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked
Unlock file done
Unlock file done
Processing done.
Unlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.
All done.

stricimacko · 11-19-2015, 12:09

Allview A5 Quad (Gionee P3) IMEI written successfully (permanently)

stricimacko · 11-19-2015, 12:39

Successfully Flashed Lenovo Tab A1000L-F

razib143 · 11-19-2015, 14:03

Code:

 Selected connection metod: FLASH Mode
 Exe version: NCKBox AndroidMTK 1.8.6.2
 Selected phone: OT-4009X
 Reinsert phone battery. 
 Battery must be charged.
 Phone must be off with battery inside. 
 Please insert USB cable now...
 Detected : PreLoader USB VCOM Port (COM4)
 Phone detected...Please wait
 Sending DA agent, please wait...
 BaseBand CPU :MT6572_S00
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 512 MB  DRAM
----------------------------------------------------
 EMMC: (29Gb+4096Mb) SAMSUNG 0x464a32354142 
 EMMC FW VERSION: 02:00:00:00:00:00:00:00
 EMMC CID: 150100464A323541 : 0000000000000000
 EMMC UA SIZE: 0xe9000000      
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0xe9880000       [3.649 GB]
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detecting high speed port, wait......
 Detected : DA USB VCOM Port (COM5)
 Block Size: 512
 MODEL FROM PROINFO: 4009X-2AE8GB1
 SECRO FROM PROINFO: X4B0CG05AZ10
 IMEI marker was found in nvram
 IMEI[1] from NVRAM: 45f5090d0e1e56a
 If this phone have OTP IMEI, this is normal.
 IMEI[2] from NVRAM: 45f5090d0e1e56a
 If this phone have OTP IMEI, this is normal.
 Reading security, wait...

 IMEI[1] : 356868062425699
 SIM[1]: 
 Block1(N): Locked (remain:8) Code : 9408791960349315 
 Block2(NS): Unlocked
 Block3(SP): Unlocked
 Block4(C): Unlocked
 Unlocking target...please wait.
 Unlock finished.
 Wait untill phone will start charging.
 All done.

razib143 · 11-20-2015, 11:00

Alcatel OT-4015D Unlock done..

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.2
Selected phone: OT-4015D
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM4)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) MICRON 0x50314a393448
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A3934 : 0000000000000000
EMMC UA SIZE: 0xe9800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9b00000 [3.651 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM5)
Block Size: 512
MODEL FROM PROINFO: 4015D-2BMVSN3-AS40
SECRO FROM PROINFO: X6C0DY01AN20
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Reading security, wait...

IMEI[1] : 865760024216098
SIM[1]:
Block1(N): Locked (remain:0) Code : 35906345
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked

IMEI[2] : 865760024216106
SIM[2]:
Block1(N): Locked (remain:0) Code : 35906345
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

sebY7676 · 11-20-2015, 13:04

Alcatel OT282 calculated done

Code:

IMEI checksum seems ok
Model: OT282
IMEI: 8619410055XXXXX
PID: RGRO3
NCK  : 2732536278
NSCK: 3819644854
SPCK: 1155777421
SIM  : 1286871316
CORPORATE: 2188445408

diph001 · 11-20-2015, 18:31

IMEI checksum seems ok
Model: OT-A392A
IMEI: 014077000308694
PID: LZCA1(XZC8UDC0)
NCK : 1654063443
NSCK: 0630506407
SPCK: 3871656302
SIM : 4281441851
CORPORATE: 0720081679

11-15-2015, 15:48	#4053 (permalink)
samwaiyne Insane Poster Join Date: Aug 2011 Location: +254... Posts: 69 Member: 1644733 Status: Offline Thanks Meter: 33	SAMSUNG Galaxy J7 FRP RESET DONE THIS IS GREAT UPDATE NCK TEAM

11-16-2015, 21:29	#4056 (permalink)
psubbiah Insane Poster Join Date: Sep 2007 Location: india tamilnadu Posts: 96 Member: 582600 Status: Offline Thanks Meter: 24	alcatel onetouch a392a Successfully unlocked nck dongle best100% alcatel onetouch a392a.JPG thanks nck team

11-19-2015, 00:14	#4059 (permalink)
myciviczc No Life Poster Join Date: Sep 2014 Age: 46 Posts: 593 Member: 2260435 Status: Offline Thanks Meter: 118	Unlock Blu Jenny TV 2.8 using MTK Tool 3.4 (T266T) Unlock Blu Jenny TV 2.8 using MTK Tool 3.4 (T266T) I selected The Hero Jr S250 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM16 Phone detected...Please wait Conected ok with target ... Starting meta mode..... IMEI: 354333068961751 Start read, wait.... Block1(N) : Locked (remain:0) Code : 12345678 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C) : Unlocked Unlock file done Unlock file done Processing done. Unlock done. Clean tmp directory....wait. Clean tmp directory....done. META END OK. All done.

11-20-2015, 13:04	#4064 (permalink)
sebY7676 No Life Poster Join Date: Nov 2007 Location: Romania,Sinaia Posts: 1,194 Member: 637351 Status: Offline Thanks Meter: 167	Alcatel OT282 calculated done Code: IMEI checksum seems ok Model: OT282 IMEI: 8619410055XXXXX PID: RGRO3 NCK : 2732536278 NSCK: 3819644854 SPCK: 1155777421 SIM : 1286871316 CORPORATE: 2188445408

11-14-2015, 13:13	#4052 (permalink)
ekvinoks Freak Poster Join Date: Aug 2004 Location: Macedonia Age: 54 Posts: 103 Member: 79576 Status: Offline Thanks Meter: 18	Samsung G130HN unlock no root required PHONE SELECTED: SM-G130HN Port: SAMSUNG Mobile USB Modem #8(COM68) Phone Detected. SM-G130HN Model: SM-G130HN Base: SM-N900 Version: G130HNXXU0ANI1/G130HNMBM0ANI1/G130HNXXU0ANI2/G130HNXXU0ANI1 PRD: SM2G130HZWNMBM SN: RF1F91Z* IMEI: 356134061**** SIMLOCK:LOCKED Unlocking, wait. Unlock Done. If Phone Ask For Code, Enter 00000000. For check lock use: *#7465625#

11-16-2015, 09:54	#4055 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	Phone must be on, USB debugging must be enabled. If Phone ask for SU, allow. Found Device, reading info.. Brand: Huawei Model: HUAWEI Y550-L02 Build ID: HuaweiY550-L02 Platform ID: msm8916 OS version: 4.4.4 Build version: Y550-L02V100R001C346B247SP01 SU binary present. Starting unlock, wait... Using metod 3. Reading simlock info, wait.... SIMLOCK[0]: Locked SIMLOCK[1]: Unlocked SIMLOCK[2]: Unlocked Unlocking phone.... Write simlock succes. Restarting phone, wait..... If phone not restarted, please restart manually . All done.

11-17-2015, 12:32	#4057 (permalink)
razib143 No Life Poster Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33 Posts: 3,491 Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178	Vodafone Smart First 6 Direct Unlock done in flash mode.. Selected connection metod: FLASH Mode Exe version: NCKBox AndroidMTK 1.8.6.2 Selected phone: OT-V695 Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM4) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) MICRON 0x50314a39344d EMMC FW VERSION: 12:00:00:00:00:00:00:00 EMMC CID: FE014E50314A3934 : 0000000000000000 EMMC UA SIZE: 0xe9800000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9b00000 [3.651 GB] Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : DA USB VCOM Port (COM5) Block Size: 512 MODEL FROM PROINFO: V695-2BVDGB1 SECRO FROM PROINFO: X8I0HE01AZ10 IMEI marker was found in nvram IMEI[1] from NVRAM: 45f5090d0e1e56a If this phone have OTP IMEI, this is normal. IMEI[2] from NVRAM: 45f5090d0e1e56a If this phone have OTP IMEI, this is normal. Reading security, wait... IMEI[1] : 357773062435376 SIM[1]: Block1(N): Locked (remain:0) Code : 09423645 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked Unlocking target...please wait. Unlock finished. Wait untill phone will start charging. All done.

11-18-2015, 11:37	#4058 (permalink)
bojadzic Freak Poster Join Date: Nov 2006 Posts: 241 Member: 387154 Status: Offline Thanks Meter: 70	Unlock HTC 816g done (read code)---select htc 616 Phone imei[1] : 356064062542770 Phone imei[2] : 356064062569773 Simlock Info : Sim [1] Block1[N] :Locked [remain:10] Code : 12005240 Block2[NS] :Unlocked Code: 56781234 Block3[SP] :Unlocked Code: 11112222 Block4[C] :Unlocked Code: 33334444 Block5[SIM]:Unlocked Code: 55556666 ************************************ Simlock Info : Sim [2] Block1[N] :Unlocked Code : 12345678 Block2[NS] :Unlocked Code: 56781234 Block3[SP] :Unlocked Code: 11112222 Block4[C] :Unlocked Code: 33334444 Block5[SIM]:Unlocked Code: 55556666 ************************************ 1.Power phone with unacepted simcard. 2.Type code code when phone ask about. 3.For advansed info power phone with original card. 4.Type ##3646633## and from engeneering menu select SIMMELOCK If phone relock after power off, enter unlock code and make wipe. All done. read info with other tool: Reading Phone. Detecting Phone... Reading Phone Info... Manufacturer: HTC Model: HTC Desire 816G dual sim Product Name: a5mgp_dug_htc_europe Baseband: MOLY.WR8.W1315.MD.WG.MP.V34.P21, 2014/11/10 18:03 CID: HTC__A07 Secure Status: S-ON Root Status: NO! -------------------------------------------- ---------------- IMEI: 356064062542770 -------------------------------------------- ---------------- Operation Done.

11-19-2015, 12:09	#4060 (permalink)
stricimacko Insane Poster Join Date: Apr 2015 Posts: 92 Member: 2381896 Status: Offline Thanks Meter: 13	Allview A5 Quad (Gionee P3) IMEI written successfully (permanently)

11-19-2015, 12:39	#4061 (permalink)
stricimacko Insane Poster Join Date: Apr 2015 Posts: 92 Member: 2381896 Status: Offline Thanks Meter: 13	Successfully Flashed Lenovo Tab A1000L-F

11-20-2015, 11:00	#4063 (permalink)
razib143 No Life Poster Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33 Posts: 3,491 Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178	Alcatel OT-4015D Unlock done.. Selected connection metod: FLASH Mode Exe version: NCKBox AndroidMTK 1.8.6.2 Selected phone: OT-4015D Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : PreLoader USB VCOM Port (COM4) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 512 MB DRAM ---------------------------------------------------- EMMC: (29Gb+4096Mb) MICRON 0x50314a393448 EMMC FW VERSION: 12:00:00:00:00:00:00:00 EMMC CID: FE014E50314A3934 : 0000000000000000 EMMC UA SIZE: 0xe9800000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0xe9b00000 [3.651 GB] Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : DA USB VCOM Port (COM5) Block Size: 512 MODEL FROM PROINFO: 4015D-2BMVSN3-AS40 SECRO FROM PROINFO: X6C0DY01AN20 IMEI marker was found in nvram IMEI[1] from NVRAM: 45f5090d0e1e56a If this phone have OTP IMEI, this is normal. IMEI[2] from NVRAM: 45f5090d0e1e56a If this phone have OTP IMEI, this is normal. Reading security, wait... IMEI[1] : 865760024216098 SIM[1]: Block1(N): Locked (remain:0) Code : 35906345 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked IMEI[2] : 865760024216106 SIM[2]: Block1(N): Locked (remain:0) Code : 35906345 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C): Unlocked Unlocking target...please wait. Unlock finished. Wait untill phone will start charging. All done.

11-20-2015, 18:31	#4065 (permalink)
diph001 Freak Poster Join Date: Jul 2014 Location: Haiti Posts: 258 Member: 2216186 Status: Offline Sonork: 100.1668130 Thanks Meter: 120	IMEI checksum seems ok Model: OT-A392A IMEI: 014077000308694 PID: LZCA1(XZC8UDC0) NCK : 1654063443 NSCK: 0630506407 SPCK: 3871656302 SIM : 4281441851 CORPORATE: 0720081679