Post here successfully operations via NCK BOX / Dongle PREMIUM v2 - Page 321 - GSM-Forum

-=C.J.S=- · 08-09-2016, 07:41

O+ 8.93 Android "IMEI INVALID" DONE Repair .....

Code:

 Selected connection metod: Meta Connection
 Exe version: NCKDongle AndroidMTK 2.5.7.0
 Selected phone: MT6572_EMMC
 Action : IMEI REPAIR.
 IMEI[1] for write : 35348----------
 IMEI[2] for write : 35348----------
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Curent Platform: MT6572
 Phone must be off with battery inside. 
 Please insert USB cable now...
 [37]Detected: MediaTek PreLoader USB VCOM (Android) (COM37) 
 \\?\usb#vid_0e8d&pid_2000#6&8ca65f9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [42]META Port Detected: MediaTek DA USB VCOM (Android) (COM42) 
 USB\VID_0E8D&PID_2007\6&8CA65F9&0&6 
 Start sync target, waiting responce.....
 BaseBand CPU : MT6572,S01
 APP_VER: ALPS.KK1.MP7.V1
 BaseBand CPU : MT6572, E01
 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V43.P12
 HW_VER : VANZZO72_CWET_KK_HSPA_HW
 Meta mode conected ok, start reading phone....
 IMEI to repair: [1] 35348----------
 IMEI repair OK.
 IMEI to repair: [2] 35348----------
 IMEI repair OK.
 Clean Boot flag ok. 
 All done.

DONE..............

-=C.J.S=- · 08-09-2016, 07:41

O+ 8.93 Android "IMEI INVALID" DONE Repair .....

Code:

 Selected connection metod: Meta Connection
 Exe version: NCKDongle AndroidMTK 2.5.7.0
 Selected phone: MT6572_EMMC
 Action : IMEI REPAIR.
 IMEI[1] for write : 35348----------
 IMEI[2] for write : 35348----------
 Scanning for presents meta ports...
 Meta ports not detected, starting brom stage.
 Curent Platform: MT6572
 Phone must be off with battery inside. 
 Please insert USB cable now...
 [37]Detected: MediaTek PreLoader USB VCOM (Android) (COM37) 
 \\?\usb#vid_0e8d&pid_2000#6&8ca65f9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [42]META Port Detected: MediaTek DA USB VCOM (Android) (COM42) 
 USB\VID_0E8D&PID_2007\6&8CA65F9&0&6 
 Start sync target, waiting responce.....
 BaseBand CPU : MT6572,S01
 APP_VER: ALPS.KK1.MP7.V1
 BaseBand CPU : MT6572, E01
 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V43.P12
 HW_VER : VANZZO72_CWET_KK_HSPA_HW
 Meta mode conected ok, start reading phone....
 IMEI to repair: [1] 35348----------
 IMEI repair OK.
 IMEI to repair: [2] 35348----------
 IMEI repair OK.
 Clean Boot flag ok. 
 All done.

DONE..............

onz · 08-10-2016, 14:17

Mobicell HEROX TAB flash done

Quote:

Flash files count is :12
Action : Firmware update.
Selected Model: Mobicell: Mobicell HEROX TAB
Exe version: NCKDongle AndroidMTK 2.5.7.0
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM190)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 32:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0xe7400000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7800000 [3.617 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM191)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader backup already exist, skip saving.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.

onz · 08-10-2016, 15:44

call touch privacy lock unlock done

Quote:

Exe version: NCKDongle AndroidMTK 2.5.7.0
Selected model: MT6571_EMMC
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM190)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x5335584b4142
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501005335584B : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM191)
Dumping data, wait.
Value found, procesing[010c][00460000]
Resetting phone.
FORMAT EMMC FLASH : BEGIN: 0x5a740000 - LEN: 0x52c00000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
All done.

onz · 08-10-2016, 15:45

call touch privacy lock unlock done

Quote:

Exe version: NCKDongle AndroidMTK 2.5.7.0
Selected model: MT6571_EMMC
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM190)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x5335584b4142
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501005335584B : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM191)
Dumping data, wait.
Value found, procesing[010c][00460000]
Resetting phone.
FORMAT EMMC FLASH : BEGIN: 0x5a740000 - LEN: 0x52c00000
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
All done.

razib143 · 08-10-2016, 16:12

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: Ascend Y360-U31
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6582
Phone must be off with battery inside.
Please insert USB cable now...
[92]Detected: PreLoader USB VCOM Port (COM92)
\\?\usb#vid_0e8d&pid_2000#5&1bbd4c1c&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[161]META Port Detected: Gadget CDC VCOM Driver (COM161)
USB\VID_0E8D&PID_2007\5&1BBD4C1C&0&8
Start sync target, waiting responce.....
BaseBand CPU : MT6582,S01
APP_VER: ALPS.KK1.MP1.V2.10
BaseBand CPU : MT6582, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V34.P46
HW_VER : WINGTECH82_CWET_KK_HSPA_HW
Phone imei[1] : 866838020482259
Start direct unlock[SIM1]
Direct unlock done
Clean Boot flag ok.
All done.

stilnox · 08-10-2016, 19:57

Telenor P21 unlock:

USB Connection selected.
EXE VERSION: NCKBox MTK Tool 3.5
Connect phone in boot mode ...
USB\Vid_0e8d&Pid_0003&Rev_0100
Com port ok : COM175
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI[1]: 359860289048468
IMEI[2]: 359860289048468
Start read, wait....
Block1(N) : Locked (remain:5) Code : 85716234
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked
Reading simlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.
All done.

change list to Telenor PRO 239L & connect to pc.

looper · 08-10-2016, 22:17

Samsung A5 (SM-A500FU) factory unlock done! ;-)

Quote:

MODEL : SM-A500FU
BOARD ID : MSM8916
PLATFORM ID : msm8916
OS VERSION : 5.0.2
BUILD ID : LRX22G
BUILD DATE : WedDec2160529KST2015
BUILD VERSION : LRX22G.A500FUXXU1BOL1
SOFTWARE VERSION : A500FUXXU1BOL1

(GSM)RIL VERSION : SamsungRILv3.0
(GSM)BASEBAND : A500FUXXU1BOK2
(RIL)SERIAL NUMBER : RF8GB01SYVF
(RIL)SW VERSION : A500FUXXU1BOK2

Unlock metod[1].
Port: SAMSUNG Mobile USB Serial Port (COM6)
Build id: MPSS.DPM.2.0.c5-00075-M8936FAAAANUZM-1.21700.1
Version info: Nov 4 201515:21:04Jun 05 201504:00:00EAAAANVZ:d
IMEI:
Unlocking, wait....
Job done, if phone not restart, restart manually

raltelefonica · 08-11-2016, 08:56

Quote:

Phone must be off with battery inside.
Please insert USB cable now...
[5]Detected: MediaTek PreLoader USB VCOM (Android) (COM5)
\\?\usb#vid_0e8d&pid_2000#5&1c977419&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[19]META Port Detected: PreLoader USB VCOM (Android) (COM19)
USB\VID_0E8D&PID_2007\5&1C977419&0&4
Start sync target, waiting responce.....
BaseBand CPU : mt6580,S01
BaseBand CPU : MT6580, E01
SW_VER : MOLY.WR8.W1449.MD.WG.MP.V6.P12
HW_VER : TINNO6580_WE_L_HSPA_HW
Phone imei[1] : 358926070106715
Phone imei[2] : 358926070168210
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

unlock with mtkandroid ,selecting in cpu tab-MT6580,AND UNLOCK

razib143 · 08-11-2016, 17:35

MTN G280 Direct Unlock done..

USB Connection selected.
EXE VERSION: NCKBox MTK Tool 3.5
Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM97
Phone detected...Please wait
Conected ok with target ...
Starting meta mode.....
IMEI: 35976905864AAAA
Start read, wait....
Block1(N) : Locked (remain:0) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked
Unlock file done
Unlock file done
Processing done.
Unlock done.
Clean tmp directory....wait.
Clean tmp directory....done.
META END OK.
All done.

**Fast Unlocking** · 08-11-2016, 22:53

Code:

Port: SAMSUNG Mobile USB Modem #2(COM7)
Phone Detected.
SM-J120F
Model: SM-J120F
Base: SM-N900
Version: J120FXXU1AOL4/J120FOJV1AOL4/J120FXXU1AOL6/J120FXXU1AOL4
PRD: SM-J120FZDDMID
SN: R58H40RGTTV
IMEI: 355323073872951
Simlock: Locked
Unlocking, wait....
Done.

Code:

Port: SAMSUNG Mobile USB Modem #2(COM7)
Phone Detected.
SM-J120F
Model: SM-J120F
Base: SM-N900
Version: J120FXXU1AOL4/J120FOJV1AOL4/J120FXXU1AOL6/J120FXXU1AOL4
PRD: SM-J120FZDDMID
SN: R58H40RGTTV
IMEI: 355323073872951
Simlock: Unlocked
Done.

electro-teima · 08-12-2016, 13:17

Repair imei g355h Mtk 6572

Selected connection metod: Meta Connection
Exe version: NCKBox AndroidMTK 1.8.7.2
Selected phone: MT6571_EMMC
Action : IMEI REPAIR.
IMEI[1] for write : 355836208040004
IMEI[2] for write : 355836208040012
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
[7]Detected: PreLoader USB VCOM (Android) (COM7)
\\?\usb#vid_0e8d&pid_2000#6&1adfc9c1&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[13]META Port Detected: Périphérique série USB (COM13)
USB\VID_0E8D&PID_2007\6&1ADFC9C1&0&7
Start sync target, waiting responce.....
BaseBand CPU : MT6572,S01
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V1.P4
HW_VER : MBK72_WET_JB3_HSPA_HW
Meta mode conected ok, start reading phone....
IMEI to repair: [1] 355836208040004
IMEI repair OK.
IMEI to repair: [2] 355836208040012
IMEI repair OK.
All done.

**Fast Unlocking** · 08-13-2016, 08:19

Code:

Model Selected: SM-J120F/DS
Device detected OK: Modem (COM9)
Downloading..
Total Size: 2160747264
Get PIT for mapping..
Chipset: LSI3475
Firmware update start..
  Loading: sboot.bin, wait.
  Processing: sboot.bin Size: [1.35 MB] [1411344]
  Loading: param.bin, wait.
  Processing: param.bin Size: [550 KB] [563200]
  Loading: boot.img, wait.
  Processing: boot.img Size: [7.25 MB] [7604512]
  Loading: recovery.img, wait.
  Processing: recovery.img Size: [8.09 MB] [8483104]
  Loading: system.img, wait.
  Processing: system.img Size: [1.83 GB] [1961661760]
lastSequenceBytes: 11310400
  Loading: cache.img, wait.
  Processing: cache.img Size: [127.07 MB] [133243168]
lastSequenceBytes: 7414048
  Loading: hidden.img, wait.
  Processing: hidden.img Size: [14.49 MB] [15192352]
  Loading: modem.bin, wait.
  Processing: modem.bin Size: [31.08 MB] [32587824]
lastSequenceBytes: 1130544
Resetting, wait until phone restart.
Total Time: 00:03:02
************************************* 
Log saved:
C:\Users\Fast\Documents\Avengers\Saved_Logs\SM-J120F/DS_flashing_log_5.txt

Asserrare · 08-13-2016, 22:15

http://forum.gsmhosting.com/vbb/f826.../#post11982872

wsmobile · 08-15-2016, 05:58

U8510_1 unlock Done.

Now connect phone to PC
Start detect phone.
Injecting Loader.
Loader injected ok.
Start detect phone.
Read Phone Info..
Phone Imei : 357191040934263
Phone SN : F2E7NB1181803453
Phone Firmware : U8510_1V100R001C00B007_E
SimLock marker found..
Total markers found : 1
Simlock Status : Locked.
Removing SimLocks Please Wait...
Read marker : 1
Write marker : 1
All Done.

08-10-2016, 16:12	#4806 (permalink)
razib143 No Life Poster Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33 Posts: 3,491 Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178	Selected connection metod: META Mode Exe version: NCKBox AndroidMTK 1.8.7.2 Selected model: Ascend Y360-U31 Action: Unlock Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6582 Phone must be off with battery inside. Please insert USB cable now... [92]Detected: PreLoader USB VCOM Port (COM92) \\?\usb#vid_0e8d&pid_2000#5&1bbd4c1c&0&8#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [161]META Port Detected: Gadget CDC VCOM Driver (COM161) USB\VID_0E8D&PID_2007\5&1BBD4C1C&0&8 Start sync target, waiting responce..... BaseBand CPU : MT6582,S01 APP_VER: ALPS.KK1.MP1.V2.10 BaseBand CPU : MT6582, E01 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V34.P46 HW_VER : WINGTECH82_CWET_KK_HSPA_HW Phone imei[1] : 866838020482259 Start direct unlock[SIM1] Direct unlock done Clean Boot flag ok. All done.

08-10-2016, 19:57	#4807 (permalink)
stilnox Freak Poster Join Date: Apr 2008 Location: Hungary Posts: 427 Member: 759048 Status: Offline Thanks Meter: 19	Telenor P21 unlock: USB Connection selected. EXE VERSION: NCKBox MTK Tool 3.5 Connect phone in boot mode ... USB\Vid_0e8d&Pid_0003&Rev_0100 Com port ok : COM175 Phone detected...Please wait Conected ok with target ... Starting meta mode..... IMEI[1]: 359860289048468 IMEI[2]: 359860289048468 Start read, wait.... Block1(N) : Locked (remain:5) Code : 85716234 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C) : Unlocked Reading simlock done. Clean tmp directory....wait. Clean tmp directory....done. META END OK. All done. change list to Telenor PRO 239L & connect to pc.

08-11-2016, 17:35	#4810 (permalink)
razib143 No Life Poster Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33 Posts: 3,491 Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178	MTN G280 Direct Unlock done.. USB Connection selected. EXE VERSION: NCKBox MTK Tool 3.5 Connect phone in boot mode ... USB\VID_0E8D&PID_0003&REV_0100 Com port ok : COM97 Phone detected...Please wait Conected ok with target ... Starting meta mode..... IMEI: 35976905864AAAA Start read, wait.... Block1(N) : Locked (remain:0) Code : 12345678 Block2(NS): Unlocked Block3(SP): Unlocked Block4(C) : Unlocked Unlock file done Unlock file done Processing done. Unlock done. Clean tmp directory....wait. Clean tmp directory....done. META END OK. All done.

08-12-2016, 13:17	#4812 (permalink)
electro-teima Freak Poster Join Date: Mar 2014 Location: Earth Posts: 390 Member: 2156783 Status: Offline Thanks Meter: 95	Repair imei g355h Mtk 6572 Selected connection metod: Meta Connection Exe version: NCKBox AndroidMTK 1.8.7.2 Selected phone: MT6571_EMMC Action : IMEI REPAIR. IMEI[1] for write : 355836208040004 IMEI[2] for write : 355836208040012 Scanning for presents meta ports... Meta ports not detected, starting brom stage. Curent Platform: MT6572 Phone must be off with battery inside. Please insert USB cable now... [7]Detected: PreLoader USB VCOM (Android) (COM7) \\?\usb#vid_0e8d&pid_2000#6&1adfc9c1&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed} Starting META mode, wait... Restarting to meta,wait.... If drivers missing, please install CDC drivers. This can take up to 5 min on slow phones. If take too long, check device manager for drivers. [13]META Port Detected: Périphérique série USB (COM13) USB\VID_0E8D&PID_2007\6&1ADFC9C1&0&7 Start sync target, waiting responce..... BaseBand CPU : MT6572,S01 BaseBand CPU : MT6572, E01 SW_VER : MOLY.WR8.W1315.MD.WG.MP.V1.P4 HW_VER : MBK72_WET_JB3_HSPA_HW Meta mode conected ok, start reading phone.... IMEI to repair: [1] 355836208040004 IMEI repair OK. IMEI to repair: [2] 355836208040012 IMEI repair OK. All done.

08-13-2016, 22:15	#4814 (permalink)
Asserrare Junior Member Join Date: May 2014 Location: Morocco Posts: 36 Member: 2192448 Status: Offline Thanks Meter: 10	http://forum.gsmhosting.com/vbb/f826.../#post11982872

08-15-2016, 05:58	#4815 (permalink)
wsmobile No Life Poster Join Date: May 2009 Location: pattaya Posts: 1,104 Member: 1043111 Status: Offline Sonork: 1000.2 Thanks Meter: 385	U8510_1 unlock Done. Now connect phone to PC Start detect phone. Injecting Loader. Loader injected ok. Start detect phone. Read Phone Info.. Phone Imei : 357191040934263 Phone SN : F2E7NB1181803453 Phone Firmware : U8510_1V100R001C00B007_E SimLock marker found.. Total markers found : 1 Simlock Status : Locked. Removing SimLocks Please Wait... Read marker : 1 Write marker : 1 All Done.