T310 died on me!!! - GSM-Forum

sifasli · 10-20-2004, 11:14

Hello,

I have a t310 that died somehow, the only thing he does when you power on is the display light and you hear the start-biep, but then nothing happens. There is nothing on the screen, you have to take the batterie out to shut it down. I already tried to full flash it but it remains the same also, tried full gfds, reset gdfs, etc.

I have these files from cellular-support page. Does anyone has another solution or a tip?? By the way I have a terminator dongle....

regards,
Sifasli

soybean · 10-21-2004, 11:40

Have you try to re-flash AVR and ARM?

sifasli · 10-21-2004, 15:42

I only had the avr flashfile so i didn't flash arm file! Which arm file I have to flash then? I couldn't find the ARM file, any suggestions?

thanks in advance,
Sifasli

soybean · 10-21-2004, 17:10

Oops, sory you're right. T310 don't have ARM flash.

sifasli · 10-30-2004, 19:54

Is there someone else who can give me a hint ?

mohammadmouazen · 10-30-2004, 20:19

hi

try this
ftp://mohammadmouazen%40gsm-technolo...EA2_R3B003.zip

br

sifasli · 11-04-2004, 19:47

I willl try and post the results....

thanks,
Sifasli

sifasli · 11-12-2004, 23:54

still no luck , I tried

10-20-2004, 11:14	#1 (permalink)
sifasli Freak Poster Join Date: Apr 2001 Location: holland Posts: 291 Member: 4060 Status: Offline Thanks Meter: 0	T310 died on me!!! Hello, I have a t310 that died somehow, the only thing he does when you power on is the display light and you hear the start-biep, but then nothing happens. There is nothing on the screen, you have to take the batterie out to shut it down. I already tried to full flash it but it remains the same also, tried full gfds, reset gdfs, etc. I have these files from cellular-support page. Does anyone has another solution or a tip?? By the way I have a terminator dongle.... regards, Sifasli

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I think my Z3 has died on me	JeanPatrick	Ultima Box Light	1	03-10-2008 01:16
U600 died on me after optiflash flash	Jask	Samsung Flashers, Software, Firmware.	3	10-29-2007 12:50
samsung D600 died, help me please	gabsi	SWIFT Platform	2	04-11-2007 10:28
T310 Auto on off	abdullatheef	Sony Ericsson	4	07-24-2006 05:18
a800 died on me	The Repair Shop	VLSI, Conexant, Skyworks and Old Models	10	10-13-2003 06:49

10-21-2004, 11:40	#2 (permalink)
soybean Freak Poster Join Date: Aug 2004 Posts: 498 Member: 77254 Status: Offline Thanks Meter: 9	Have you try to re-flash AVR and ARM?

10-21-2004, 15:42	#3 (permalink)
sifasli Freak Poster Join Date: Apr 2001 Location: holland Posts: 291 Member: 4060 Status: Offline Thanks Meter: 0	I only had the avr flashfile so i didn't flash arm file! Which arm file I have to flash then? I couldn't find the ARM file, any suggestions? thanks in advance, Sifasli

10-21-2004, 17:10	#4 (permalink)
soybean Freak Poster Join Date: Aug 2004 Posts: 498 Member: 77254 Status: Offline Thanks Meter: 9	Oops, sory you're right. T310 don't have ARM flash.

10-30-2004, 19:54	#5 (permalink)
sifasli Freak Poster Join Date: Apr 2001 Location: holland Posts: 291 Member: 4060 Status: Offline Thanks Meter: 0	Is there someone else who can give me a hint ?

10-30-2004, 20:19	#6 (permalink)
mohammadmouazen No Life Poster Join Date: Dec 2003 Location: Jordan Posts: 790 Member: 45682 Status: Offline Thanks Meter: 54	hi try this ftp://mohammadmouazen%40gsm-technolo...EA2_R3B003.zip br

11-04-2004, 19:47	#7 (permalink)
sifasli Freak Poster Join Date: Apr 2001 Location: holland Posts: 291 Member: 4060 Status: Offline Thanks Meter: 0	I willl try and post the results.... thanks, Sifasli

11-12-2004, 23:54	#8 (permalink)
sifasli Freak Poster Join Date: Apr 2001 Location: holland Posts: 291 Member: 4060 Status: Offline Thanks Meter: 0	still no luck , I tried