Smart-Clip2 Software v1.10.03 released!

[GSM_Support]

Smart-Clip2 Software v1.10.02 is out!


Pack 4 Update

1. Added GUINEA PIG METHOD of Unlock / Repair IMEI for:

♦ ZTE Kis 3
♦ Moche Smart A16 (MEO)
During the operation the phone will reboot once.
Full service manual can be found here

This service method can potentially work on the following
Qualcomm-based ZTE devices:

♦ Turkcell T50
♦ Blade Apex 2 / Blade Vec 4G
♦ Concord II / Compel
♦ Grand X / Grand Memo II
♦ Open C / Open II
♦ Q505 / Q801U
♦ V5 Red Bull
♦ Z667t
♦ Z730 / Z777
♦ Z830
♦ Z933 / Z970
If it’s possible to root the phone, run the required service procedure (unlock or repair), according to the provided manual.
We are waiting for your logs and feedbacks.

Pack 1 Update:

1. The following models added to the list of supported for servicing with Yoda method:

♦ BLU DASH JR K (MT6571)
♦ BMobile AX745 (MT6572)
♦ BGH Joy Smart A1 (MT6572)
♦ FONDI T708B (MT6582)
♦ GO Live S2 (MT6575)
♦ INSYS J3A10 (MT6572)
♦ Orange Luno (MT6572)
♦ Oppo Neo 3 R831K (MT6572)
♦ Lenovo Vibe X2 (MT6595)
♦ M4tel Ss4020 (MT6582)
♦ Micromax A104 (MT6582)
♦ Plum X350 (MT6572)
♦ Philips W3500 (MT6582)
♦ Posh Orion Mini S350 (MT6572)
♦ Pcd E351 (MT6572)
♦ Verykool S3501 (MT6571)
♦ Yezz Andy 3.5EI (MT6572)

Pack 3 update

1. New firmware versions have been uploaded in the fast
Direct Unlock / Repair IMEI database:

♦ Motorola MB300: USAMOTS01TLSNA042.0R
♦ Turkcell Maxi Plus 5: P752TV1.0.0B08
♦ ZTE Skate: TMO_AUT_P743TV1.0.0B10
♦ ZTE Z222: ATT_AM_P671B41V1.0.0B14-S
♦ ZTE Z992: ATT_US_P752A15V1.0.0B22

2. The following Qualcomm-based models added to the list of supported:
♦ BLU DASH 3.5 D160i
♦ HUAWEI G620S-L01
♦ Vodafone Smart Tab 4G

3. We have fixed minor customer-reported issues.

Download Smart-Clip2 Software v1.02.01

[master2009]

ZTE Kis 3 with root or without root ? and all v sptd ?

[GSM_Support]

@ master2009,

Almost all phone models that are getting serviced via ADB mode requires rooting.

Please check detailed manual on how to service ZTE Lis 3 by following this link.

Best Regards
GSMServer team

[GSM_Support]

Smart-Clip2 Software v1.10.03 is out!

1. We've added SPC code reading feature
for Qualcomm Hexagon-based Motorola devices.
The code is displayed in a log.

2. We have reorganized and enhanced operating procedures for ZTE Kis III.
We strongly recommend to use the latest software version ONLY

3. The following models have been added
to the list of supported devices for servicing with
Yoda method:

♦ Zte Blade L3 Plus (MT6582)
♦ Zte Blade L3 (MT6582)
♦ Cat B15Q (MT6582)

4. ZTE Beeline Smart2 / V811W is officially confirmed to be supported by Smart-Clip2.

Download Smart-Clip2 Software v1.10.03

[zishhaider]

after alot of searching i am unable to find any root for g620s.. excluding only one way is to email serial imei and model to huwaie and get bootloader unlocked than cwm and root.. it is hell of time consuming.. team do u guys have any solution to root this model which is not in my knowledge?

[mcandre]

zishhaider, what version of Android does your phone have? Did you try to root it with SC2 root solution (using different methods)?

[zishhaider]

Originally Posted by mcandre

zishhaider, what version of Android does your phone have? Did you try to root it with SC2 root solution (using different methods)?

4.4.4 is version.. I have tried all rooting tools(most popular like v root etc)..

[GSM_Support]

New software v1.10.03.02 has been released.

This version of software contains several important improvements regarding service of Qualcomm Hexagon devices. Please download and use the latest version of software.

Download Smart-Clip2 Software v1.10.03.02

Best Regards
GSMServer team

[mecitkural]

sigma king box for motorola for mediatek chips for qualcom chips..Big Big thanks my phone work at the moment my log..


Phone model: motorola XT1060
Android 4.2.2; Firmware: 13.9.0Q2.X-116-MX-17-57-X-1; Date: Fri Sep 20 15:27:13 CDT 2013
Version: 13.9.0Q2.X-116-MX-17-57-X-1
Baseband Firmware: MSM8960PRO_BP_2323.038.123.00R
Baseband Processor: msm8960dt
Date: Apr 29 2014 21:43:09, Apr 28 2014 00:00:00, AAAAATAZ
IMEI: 990004549328950
SPC: 000000
Repaired IMEI:3*************
Done
Restarting phone...Done

[juniorljs]

Smart-Clip 2 v.1.10.03
600000000 Smart-Clip 2 dongle 1.10, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
--------- 2015-04-03 10:40:57 ---------
Smart-Clip 2 1.10.03 Qcom: Direct unlock
ZTE Handset Diagnostic Interface (COM410), Provider: ZTE Corporation, Driver ver.: 5.2104.1.1, Date: 9/10/2013, USB\VID_19D2&PID_0500&REV_0228&MI_00
Version: P821T02_MPCSV1.0.0B06,
Firmware: MPSS.TR.1.0.c10-00005-M8610BAAAANAZM-2
Date: Mar 28 2014 08:56:51, Mar 19 2014 14:00:00, BAAAANAZ
IMEI: 863993020000000
Bluetooth address: 000000000000
Unsupported phone model
--------- 2015-04-03 10:41:17 ---------
Smart-Clip 2 1.10.03 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ ROMaster Composite ADB Interface
Version: Linux version 3.4.0+ (xueyibing@zte2) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Mar 28 14:59:01 CST 2014
Phone model: zte Z730
Android 4.3; Firmware: JLS36C; Date: Fri Mar 28 14:46:54 CST 2014
Version: Z730_MetroPCSV1.0.0B06
Please ROOT the phone first!

and i rooted it


--------- 2015-04-03 11:03:54 ---------
Smart-Clip 2 1.10.03 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ ZTE Handset ADB Interface
Version: Linux version 3.4.0+ (xueyibing@zte2) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Mar 28 14:59:01 CST 2014
Phone model: zte Z730
Android 4.3; Firmware: JLS36C; Date: Fri Mar 28 14:46:54 CST 2014
Version: Z730_MetroPCSV1.0.0B06
Baseband Processor: Qualcomm MSM 8610 (Flattened Device Tree)
Preparing..........Not found


Not unlocked

[Boshko_Alfa]

Huawei P6 with 4.4.2 not supported.

Smart-Clip 2 v.1.10.03 build 02
628224422 Smart-Clip 2 dongle 1.10, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Not activated
--------- 2015-04-07 14:01:16 ---------
Smart-Clip 2 1.10.03 MTK: Calculate unlock codes
Calculating unlock codes (Alcatel OT-6030, 6030X-2ATBMK1 (XCP0FM01), 869796010489733)...Done
--------- 2015-04-07 14:14:15 ---------
Smart-Clip 2 1.10.03 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ Alcatel Android ADB Interface
Version: Linux version 3.4.0 (android-bld@aclgcl-ubnt173) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon May 20 15:52:24 CST 2013
Phone model: TCT ALCATEL ONE TOUCH 6030X
Android 4.1.1; Firmware: JRO03C; Date: Thu Jun 6 19:37:28 CST 2013
Version: Jelly Bean
Baseband Firmware: MAUI.11AMDW1222SP.V15.F5.P11., 2013/05/06 12:50
Baseband Processor: MT6577
Hardware IMEI: 869796010489733
Software IMEI: 869796010489733
Reading security block...OK
Security area saved to "C:\Users\Bosko\Documents\Smart-Clip 2\security backup\869796010489733_TCT_ALCATEL ONE TOUCH 6030X_JRO03C_Thu Jun 6 193728 CST 2013.skb"
Unlocking phone...Done
Restarting phone...Done
--------- 2015-04-07 14:30:50 ---------
Smart-Clip 2 1.10.03 ADB: Backup calibration data
* daemon not running. starting it now *
* daemon started successfully *
^ ROMaster Composite ADB Interface
Version: Linux version 3.0.8-g2df1fc8 (@wuheatculx00024) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Sat Dec 13 13:39:47 CST 2014
Phone model: HUAWEI P6-U06
Android 4.4.2; Firmware: HuaweiP6-U06; Date: Sat Dec 13 13:39:02 CST 2014
Version: P6-U06V100R001C17B708@ADA
Baseband Firmware: IMC1202_PENTA
Baseband Processor: k3v2oem1
Reading calibration data.....Done
Restarting phone...Done
--------- 2015-04-07 14:37:34 ---------
Smart-Clip 2 1.10.03 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ ROMaster Composite ADB Interface
Version: Linux version 3.0.8-g2df1fc8 (@wuheatculx00024) (gcc version 4.7 (GCC) ) #2 SMP PREEMPT Sat Dec 13 13:39:47 CST 2014
Phone model: HUAWEI P6-U06
Android 4.4.2; Firmware: HuaweiP6-U06; Date: Sat Dec 13 13:39:02 CST 2014
Version: P6-U06V100R001C17B708@ADA
Baseband Firmware: IMC1202_PENTA
Baseband Processor: k3v2oem1
Software IMEI: Not found
Security area saved to "C:\Users\Bosko\Documents\Smart-Clip 2\security backup\ HUAWEI P6-U06 HuaweiP6-U06 (2).skb"
Not found

[GSM_Support]

@ Boshko_Alfa,

please tell me exactly P6 model that you have.

Also:

In order to fix "Software IMEI: Not found" software issue in Huawei HiSilicon-based smartphones, please perform the following steps:

Backup NV file from a working set and restore it into the corrupted one.
Repair phone’s original IMEI

Best Regards
GSMServer team

[leive]

ZTE Open C not supported in Qualcomm:

Smart-Clip 2 v.1.10.03 build 02
33457XXXX Smart-Clip 2 dongle 1.10, Initializing...OK
Pack 1: Activated
Pack 2: Activated
Pack 3: Activated
Pack 4: Activated
--------- 2015-04-08 03:19:40 ---------
Smart-Clip 2 1.10.03 Qcom: Direct unlock
ZTE Handset Diagnostic Interface (COM141), Provider: ZTE Corporation, Driver ver.: 5.2104.1.2, Date: 3/16/2014, USB\VID_19D2&PID_1350&REV_0228&MI_00
Version: FFOS_FR_ZTE_P821A10V1.0.0B02,
Firmware: MPSS.TR.2.0.c17-00003-M8610BAAAANAZM-1
Date: Aug 6 2014 06:48:18, May 29 2014 18:00:00, BAAAANWZ
IMEI: 8645090239XXXXX
Bluetooth address: 03C08834DE34
Unsupported phone model

ZTE Open C in ADB:

Smart-Clip 2 1.10.03 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ ZTE Handset ADB Interface
Version: Linux version 3.4.0-perf (chencong@SCL-6SH147) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Aug 6 07:06:47 CST 2014
Phone model: ZTE Open C
Android 4.3; Firmware: JLS36C; Date: Wed Aug 6 06:45:07 CST 2014
Version: FFOS_FR_ZTE_OPENCV1.0.0B02
Baseband Processor: Qualcomm MSM 8610 (Flattened Device Tree)
Preparing........Data error

[GSM_Support]

@ juniorljs,

Smart-Clip2 Software v1.10.04 has been released!
With this release ZTE Z730 phone model has been added to the list of supported in a test mode.
Please perform following operations:

1. Download Smart-Clip2 Software v1.10.04
2. Install it
3. Root phone
4. Dial *983*87274# and select "ADB+Diag".
5. Once this is done, you can proceed to servicing procedure following the instructions in the manual.

@ leive,

Smart-Clip2 Software v1.10.04 has been released.
With this release ZTE open C has been added to the list of supported.
Please perform following operations:

1. Download Smart-Clip2 Software v1.10.04
2. Install it
3. Run Direct Unlock operation according to this manual
4. Post results in a current thread.

Best Regards
GSMServer team

[juniorljs]

Originally Posted by GSM_Support

@ juniorljs,

Smart-Clip2 Software v1.10.04 has been released!
With this release ZTE Z730 phone model has been added to the list of supported in a test mode.
Please perform following operations:

1. Download Smart-Clip2 Software v1.10.04
2. Install it
3. Root phone
4. Dial *983*87274# and select "ADB+Diag".
5. Once this is done, you can proceed to servicing procedure following the instructions in the manual.

@ leive,

Smart-Clip2 Software v1.10.04 has been released.
With this release ZTE open C has been added to the list of supported.
Please perform following operations:

1. Download Smart-Clip2 Software v1.10.04
2. Install it
3. Run Direct Unlock operation according to this manual
4. Post results in a current thread.

Best Regards
GSMServer team

@GSM Support

--------- 2015-04-11 17:00:22 ---------
Smart-Clip 2 1.10.04 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ ZTE Handset ADB Interface
Version: Linux version 3.4.0+ (xueyibing@zte2) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Mar 28 14:59:01 CST 2014
Phone model: zte Z730
Android 4.3; Firmware: JLS36C; Date: Fri Mar 28 14:46:54 CST 2014
Version: Z730_MetroPCSV1.0.0B06
Baseband Processor: Qualcomm MSM 8610 (Flattened Device Tree)
Date: Mar 28 2014 08:56:51, Mar 19 2014 14:00:00, BAAAANAZ
IMEI: 8639930234XXXXX
Reading data....Error CB339D74EAD


I have done like you asked and i have an error at the end