[juniorljs]

Originally Posted by GSM_Support

@ juniorljs,

Smart-Clip2 Software v1.10.04 has been released!
With this release ZTE Z730 phone model has been added to the list of supported in a test mode.
Please perform following operations:

1. Download Smart-Clip2 Software v1.10.04
2. Install it
3. Root phone
4. Dial *983*87274# and select "ADB+Diag".
5. Once this is done, you can proceed to servicing procedure following the instructions in the manual.

@ leive,

Smart-Clip2 Software v1.10.04 has been released.
With this release ZTE open C has been added to the list of supported.
Please perform following operations:

1. Download Smart-Clip2 Software v1.10.04
2. Install it
3. Run Direct Unlock operation according to this manual
4. Post results in a current thread.

Best Regards
GSMServer team

@GSM Support

--------- 2015-04-11 17:00:22 ---------
Smart-Clip 2 1.10.04 ADB: Direct unlock
* daemon not running. starting it now *
* daemon started successfully *
^ ZTE Handset ADB Interface
Version: Linux version 3.4.0+ (xueyibing@zte2) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Mar 28 14:59:01 CST 2014
Phone model: zte Z730
Android 4.3; Firmware: JLS36C; Date: Fri Mar 28 14:46:54 CST 2014
Version: Z730_MetroPCSV1.0.0B06
Baseband Processor: Qualcomm MSM 8610 (Flattened Device Tree)
Date: Mar 28 2014 08:56:51, Mar 19 2014 14:00:00, BAAAANAZ
IMEI: 8639930234XXXXX
Reading data....Error CB339D74EAD


I have done like you asked and i have an error at the end