iPhone 6S won't activate after NAND replace - GSM-Forum

AndreyPkr · 01-12-2018, 20:49

Hello everyone,*

I have got a problem with an iPhone 6S after I replaced the NAND.*

Basically. the phone came in with error 9. I took out the NANS and used WL PCIE tool to read it. WL won't read it, so the NAND was dead completely.*

I took another NAND from another board, used WL to change the Serial Number (took it form the i6S box) and place it on the board.

The iPhone restores fine, it has IMEI, ICCID, SN and MEID. It recognises the SIM, is taking full cellular reception, WI-FI is working but it won't activate.*

I get this message: " The iPhone "iPhone" could not be activated because the activation information could not be obtained from the device"

Any help?
Is there a way to fix it?
Does anyone uses WL and had the same issue?
Have I missed something?

Thank you all!

7Axis · 01-13-2018, 05:00

Are you sure the IMEI is clean?

mozgur · 01-13-2018, 07:42

Did you write WiFi And bt mac address to nand ic from original information?

sagarsewa@pkr · 01-13-2018, 07:44

use gsx to get the originial information for your iphone 6
and write these informtion to nand

everything wil be ok

AndreyPkr · 01-13-2018, 12:28

Quote:

Originally Posted by sagarsewa@pkr

use gsx to get the originial information for your iphone 6
and write these informtion to nand

everything wil be ok

Thank you very much for your help.

I do have an problem login in to the gsx.apple.com.

I get this message: "Access not provisioned"

AndreyPkr · 01-13-2018, 12:29

Quote:

Originally Posted by mozgur

Did you write WiFi And bt mac address to nand ic from original information?

The original NAND was completely dead, couldn't read the original info from it!

mozgur · 01-18-2018, 06:30

You can buy from this SimKilitBayi.Net

tomasz_p · 06-07-2018, 19:29

Did you manage to do it at the end? I've got similar problem with iPhone 7

01-12-2018, 20:49	#1 (permalink)
AndreyPkr Freak Poster Join Date: Oct 2012 Location: London, UK Age: 34 Posts: 121 Member: 1819464 Status: Offline Thanks Meter: 88	iPhone 6S won't activate after NAND replace Hello everyone,* I have got a problem with an iPhone 6S after I replaced the NAND.* Basically. the phone came in with error 9. I took out the NANS and used WL PCIE tool to read it. WL won't read it, so the NAND was dead completely.* I took another NAND from another board, used WL to change the Serial Number (took it form the i6S box) and place it on the board. The iPhone restores fine, it has IMEI, ICCID, SN and MEID. It recognises the SIM, is taking full cellular reception, WI-FI is working but it won't activate.* I get this message: " The iPhone "iPhone" could not be activated because the activation information could not be obtained from the device" Any help? Is there a way to fix it? Does anyone uses WL and had the same issue? Have I missed something? Thank you all!

01-13-2018, 05:00	#2 (permalink)
7Axis Freak Poster Join Date: Nov 2017 Location: Canada Posts: 131 Member: 2777379 Status: Offline Thanks Meter: 34	Are you sure the IMEI is clean?

01-13-2018, 07:42	#3 (permalink)
mozgur Insane Poster Join Date: Nov 2004 Age: 47 Posts: 71 Member: 89550 Status: Offline Thanks Meter: 8	Did you write WiFi And bt mac address to nand ic from original information?

01-13-2018, 07:44	#4 (permalink)
sagarsewa@pkr Freak Poster Join Date: Jul 2015 Location: Icloud Posts: 369 Member: 2428367 Status: Offline Sonork: 193.393.394.1 Thanks Meter: 219	use gsx to get the originial information for your iphone 6 and write these informtion to nand everything wil be ok

01-18-2018, 06:30	#7 (permalink)
mozgur Insane Poster Join Date: Nov 2004 Age: 47 Posts: 71 Member: 89550 Status: Offline Thanks Meter: 8	You can buy from this SimKilitBayi.Net

06-07-2018, 19:29	#8 (permalink)
tomasz_p Junior Member Join Date: Jan 2007 Posts: 19 Member: 434661 Status: Offline Thanks Meter: 3	Did you manage to do it at the end? I've got similar problem with iPhone 7