htc nexus 9 unlock boot loader
 

hi
my htc nexux 9 stuck I can get bootloader I need flash this tablet I got 2 different y-cable and 2 usb sd reder when I connect to pc they both working xtcclip2 software I cant get unlock boot loader read guide from xtcclip2 website how to use y-cable connect y-cable to tablet and fastboot and simlock still not connect clip on tablet please help where iam doing mistakes
thankyou

With the new security you cannot simply unlock bootloader without enabling it from the menu. But sometimes, you may not have access to the menu to enable it.
To unlock bootloader using XTC 2 Clip please do the following:
1. Connect XTC 2 Clip to the Nexus 9 using Y-cable.
2. Boot to hboot.
3. Choose SIMLOCK menu. The phone will detect the clip and return to main menu.
4. Now disconnect Y cable and connect regular USB cable from PC.
5. Do 'fastboot oem unlock'.
6. Nexus 9 will erase all data and return to bootloader.
Now you can flash any firmware into your tablet.

hi
I follow this

hi
can you help this unlock boot loader please
thankyou

Hello,
What's the problem? I thought you did it already.

no sir when I connect Y-cable sd adapter and tablet connect go to hbbot then simlock press its not detect clip on tablet please help
thankyou

If I'm not wrong your power cord from Y cable is not attached anywhere ? You should plug it into PC, as it gets powered from it.

thankyou I connect usb to pc and when I go simlock on tablet
its freeze
thankyou

hi
please advice iam doing anything wrong to unlock bootloader
thankyou

please attach Y Cable to PC

hi
when I attach to pc to cable tablet go freeze
thankyou

change Y Cable and check...

igot 2 Y-cable and 3 microusb adapter still same
thankyou

Sorry, but as you understand it's hard to do anything remotely when it comes to hardware.
We have tested with our Nexus and it's working fine, other customers have reported success as well.

So please, make sure your Y cable schematic matches the one provided by us:

http://forum.gsmhosting.com/vbb/f961...cable-1977989/

I hard reboot the tablet and it freezes on detect smart sd LOADING OP82DIAG . zip
and even when i try and press simlock it freezes

Please help me!!!!!


Reading information...
Using Fastboot mode...
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.44.1.0123
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP
(bootloader) version-mts: 33903942
(bootloader) cpu-revision: A03
(bootloader) serialno: HT4ADJT01165
(bootloader) cssn: 08ff00c020000000740d124700000001
(bootloader) imei: 355195000000010
(bootloader) meid: 00000000000000
(bootloader) product: flounder
(bootloader) variant:
(bootloader) platform: hTCBtegra
(bootloader) modelid: 0P8210000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4200mV
(bootloader) partition-layout: Generic
(bootloader) unlocked: verified
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7acbd338
(bootloader) hbootpreupdate: 1
(bootloader) gencheckpt:
(bootloader) partition-size:hboot: 0x600000
(bootloader) partition-type:hboot: raw
Reading secure flag information... (bootloader) [ERR] Command error !!!
OKAY
Execution time is 11(ms)
Reading CID information
... (bootloader) cid: 11111111
OKAY
Execution time is 8(ms)
Reading MEID information
... (bootloader) meid: 00000000000000
OKAY
Execution time is 9(ms)
Read information completed.