siemens a60 solution 100% free - GSM-Forum

patric · 12-17-2003, 17:14

i have the solution to unlock the siemens a60 using free solution
tested this day on 2 A60 version 10 and 14 . 100% working .

using the soft feria m55 patch and test point for c60 and a60

1- use the testpoint like picture http://www.sst-gsm.nm.ru/c60_a60.zip
2- be careful and read the full eeprom of your phone ..
3-try to unlock the phone (A60) like unlocking one siemens M55.
4-(always read log , create map then upload map)..

tested 100% ;

patric · 12-17-2003, 17:15

if u have some trouble contact me via icq

mobilephonesgro · 12-17-2003, 17:25

Thanks for the info mate.

Will Test.

to_deal_with · 12-17-2003, 17:29

and how about the phones wiht higher version? does it also work?

moustafatch · 12-17-2003, 17:49

selution not working for me

with fria said update not accepted when i upload the map
with m55 unlocker said for me ready but phone still locked and the same with mc60 unlocker my phone version 10

patric · 12-18-2003, 09:40

i think your problem is in the testpoint .
try to verify the wire that u cut , i think that it will be ok..

Ciubaka · 12-18-2003, 09:45

Use griffin or gctl clip
It works 100% but is not free ....

comunicatel · 12-18-2003, 11:03

@patric
your solution may kill phones because C60 and A60 eeprom entries are different from M55 and MC60's and thus you may kill the firmware area.So you may have some success with some phones but the solutioin is not safe.
@djdronka
Please no sales here. BTW many people have killed their phones with griffin or gctl clip.

VasiliuS · 12-18-2003, 11:33

@patric

good solution for kill phones.......................

trust me!
pls test on 50 pieses :-)

patric · 12-18-2003, 15:42

for 2 A60 version 14 and 10 it's work 100 %

i think that this solution work for all other version because when i readed the phone like m55 the soft says that it's A60lg95ver14 ; i think that it read the phone correctly and can unlock it.

but before to unlock the phone be sure that u read the full eeprom from the phone (about 256 ko ) and i think that it will be ok....

what's my profit to give to all forum members a solution that dosen't work and kill always phone ;;; !!!!

be carefull , if u don't trust to me don't try this solution ..

and to all others if u have some trouble , u can contact me via icq..

patric · 12-18-2003, 15:44

don't forget the tespoint .
u can find it anywhere

stigor · 12-18-2003, 16:50

@comunicatel
Please no sales here. BTW many people have killed their phones with griffin or gctl clip.

Clip not kill phones. Tested on all versions.

to_deal_with · 12-18-2003, 17:33

I know clip doesn't kill phone, but it makes it sleep!!!
when turn on phone, it gives a buzzz or asks 4 simcard and then after max. 3 seconds turn again off with a buzz. it is caused by clip. I agree that the clip is tested on all versions. But do you agree that all tefoons has the same settings, configuration and imei? I dont' think so

mtony969 · 12-18-2003, 21:51

the clip has had a good run but dont expect to much from it
i would not use it to unlock a60.

Sioma · 12-18-2003, 23:28

I unlock Siemens A60 version 16 with M55 patch
I cut test point, and make full back up of eprom,make log,make map,upload map to phone,whats all.
Phone unlocked!!!!!!!!
Download this if you need
unlock program
http://groups.yahoo.com/group/simaka..._m55_patch.zip
test point
[http://groups.yahoo.com/group/simaka...60_a60_est.zip
Thanks to Patric

12-17-2003, 17:14	#1 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	siemens a60 solution 100% free i have the solution to unlock the siemens a60 using free solution tested this day on 2 A60 version 10 and 14 . 100% working . using the soft feria m55 patch and test point for c60 and a60 1- use the testpoint like picture http://www.sst-gsm.nm.ru/c60_a60.zip 2- be careful and read the full eeprom of your phone .. 3-try to unlock the phone (A60) like unlocking one siemens M55. 4-(always read log , create map then upload map).. tested 100% ;

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Solutions for Siemens A60-C60-MC60	samirov-gsm	Siemens Hardware Repair Area	0	07-02-2009 08:46
unlock siemens A60 for free	patric	E-Gold Based Phones	24	01-12-2004 15:23
New REAL 100% Siemens X35 Solution by Cable	zinnat	x1x to x45/x50	10	10-26-2000 23:47
I HAWE SOLUTION FOR SIEMENS SL10 WORKS 100%	sebastijan	x1x to x45/x50	2	12-18-1999 10:14

12-17-2003, 17:15	#2 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	if u have some trouble contact me via icq

12-17-2003, 17:25	#3 (permalink)
mobilephonesgro Freak Poster Join Date: Mar 2003 Location: Las Gidi Posts: 340 Member: 23760 Status: Offline Thanks Meter: 1	Thanks for the info mate. Will Test.

12-17-2003, 17:29	#4 (permalink)
to_deal_with Registered User Join Date: Dec 2002 Location: The Netherlands Age: 41 Posts: 975 Member: 19168 Status: Offline Thanks Meter: 55	and how about the phones wiht higher version? does it also work?

12-17-2003, 17:49	#5 (permalink)
moustafatch No Life Poster Join Date: Feb 2003 Location: HUR / R.S Age: 40 Posts: 1,500 Member: 21750 Status: Offline Sonork: 100.62509 Thanks Meter: 73	selution not working for me with fria said update not accepted when i upload the map with m55 unlocker said for me ready but phone still locked and the same with mc60 unlocker my phone version 10

12-18-2003, 09:40	#6 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	i think your problem is in the testpoint . try to verify the wire that u cut , i think that it will be ok..

12-18-2003, 09:45	#7 (permalink)
Ciubaka No Life Poster Join Date: Oct 2003 Posts: 923 Member: 42304 Status: Offline Thanks Meter: 12	Use griffin or gctl clip It works 100% but is not free ....

12-18-2003, 11:03	#8 (permalink)
comunicatel Freak Poster Join Date: Mar 2002 Posts: 474 Member: 10201 Status: Offline Thanks Meter: 0	@patric your solution may kill phones because C60 and A60 eeprom entries are different from M55 and MC60's and thus you may kill the firmware area.So you may have some success with some phones but the solutioin is not safe. @djdronka Please no sales here. BTW many people have killed their phones with griffin or gctl clip.

12-18-2003, 11:33	#9 (permalink)
VasiliuS Freak Poster Join Date: Dec 2002 Location: Ukraine Age: 43 Posts: 348 Member: 18665 Status: Offline Thanks Meter: 2	@patric good solution for kill phones....................... trust me! pls test on 50 pieses :-)

12-18-2003, 15:42	#10 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	for 2 A60 version 14 and 10 it's work 100 % i think that this solution work for all other version because when i readed the phone like m55 the soft says that it's A60lg95ver14 ; i think that it read the phone correctly and can unlock it. but before to unlock the phone be sure that u read the full eeprom from the phone (about 256 ko ) and i think that it will be ok.... what's my profit to give to all forum members a solution that dosen't work and kill always phone ;;; !!!! be carefull , if u don't trust to me don't try this solution .. and to all others if u have some trouble , u can contact me via icq..

12-18-2003, 15:44	#11 (permalink)
patric No Life Poster Join Date: Jan 2002 Location: tunis,Tunisia Age: 54 Posts: 5,436 Member: 8228 Status: Offline Sonork: 12399830 Thanks Meter: 136	don't forget the tespoint . u can find it anywhere

12-18-2003, 16:50	#12 (permalink)
stigor No Life Poster Join Date: Feb 2002 Location: Serbia Posts: 878 Member: 9165 Status: Offline Thanks Meter: 0	@comunicatel Please no sales here. BTW many people have killed their phones with griffin or gctl clip. Clip not kill phones. Tested on all versions.

12-18-2003, 17:33	#13 (permalink)
to_deal_with Registered User Join Date: Dec 2002 Location: The Netherlands Age: 41 Posts: 975 Member: 19168 Status: Offline Thanks Meter: 55	I know clip doesn't kill phone, but it makes it sleep!!! when turn on phone, it gives a buzzz or asks 4 simcard and then after max. 3 seconds turn again off with a buzz. it is caused by clip. I agree that the clip is tested on all versions. But do you agree that all tefoons has the same settings, configuration and imei? I dont' think so

12-18-2003, 21:51	#14 (permalink)
mtony969 No Life Poster Join Date: Mar 2003 Location: england Age: 65 Posts: 3,035 Member: 24552 Status: Offline Thanks Meter: 13	the clip has had a good run but dont expect to much from it i would not use it to unlock a60.

12-18-2003, 23:28	#15 (permalink)
Sioma No Life Poster Join Date: Oct 2002 Location: Lithuania Age: 45 Posts: 627 Member: 16237 Status: Offline Thanks Meter: 30	I unlock Siemens A60 version 16 with M55 patch I cut test point, and make full back up of eprom,make log,make map,upload map to phone,whats all. Phone unlocked!!!!!!!! Download this if you need unlock program http://groups.yahoo.com/group/simaka..._m55_patch.zip test point [http://groups.yahoo.com/group/simaka...60_a60_est.zip Thanks to Patric