06-11-2009 New Cyclonebox Firmware Released - GSM-Forum

SiRoYa · 11-06-2009, 09:47

New Cyclonebox Nokia firmware is uploaded to our server.

Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application

- Fixed permamently bug which prevented box starting main firmware (only bootloader...)
- Added LED-progress upon Main Firmware Boot ; this will help to diagnose bootup problems in future; meanings of LED blinking upon startup below
- Code Optimizations
- RTOS Code Updated to 6.0.0
- GCC Compiler Updated to 4.3.2
- Device Framework Updated to 1.5.0
- Little Bugfixes

Firmware 01.0A LEDs Meaning upon Main Firmware startup
GREEN, BLUE, RED, ORANGE Firmware Starting - Initializing Interrupts and PLL Clocks (at this stage check 12MHZ Crystals)
GREEN, RED, ORANGE Initializing HW Modules, RTC (at this stage check RTC Clock)
RED, ORANGE Doing Security Checkup (Should not hang here)
ORANGE Initializing USB Stack (Check crystals, USB Cable Length, etc)
NO LEDS Firmware Booted

wbr
CycloneBox Team

supportallgsm · 11-06-2009, 09:50

Thanks...............

Updating Security Area...
Security Area Updated, Took: 0.110s
Updating Main Firmware...
Main Firmware Updated, Took: 11.125s
Disconnected from Cyclone Server
Box Maintenance finished successfully

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application

gsm_enggine · 11-06-2009, 09:51

Quote:

Updating Security Area...
Security Area Updated, Took: 0.125s
Updating Main Firmware...
Main Firmware Updated, Took: 10.750s
Disconnected from Cyclone Server
Box Maintenance finished successfully

Quote:

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application

update sucses.............
what different from last firmware?????

thx

79mobile · 11-06-2009, 09:53

Thanks for help my box.
br.,

GSMSERVE · 11-06-2009, 09:58

============================
Updating Security Area...
Security Area Updated, Took: 0.125s
Updating Main Firmware...
Main Firmware Updated, Took: 11.62s
Disconnected from Cyclone Server
Box Maintenance finished successfully

.:Towhid:. · 11-06-2009, 10:09

That's Very Good, Previous update was many problem............................

newfoundghori · 11-06-2009, 10:10

what is new for that box firmware!!!

rock23 · 11-06-2009, 10:11

tnx update successfull now my box kicking again

tnx mr siroya

bro

rock23

T0T0 · 11-06-2009, 10:21

heres mine...

Updating Security Area...
Security Area Updated, Took: 0.125s
Updating Main Firmware...
Main Firmware Updated, Took: 10.890s
Disconnected from Cyclone Server
Box Maintenance finished successfully

bb5 user · 11-06-2009, 10:22

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application
Box Serial Number: C000xxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk19
Initializing security card...
Card Serial Number: D000xxx
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.02v PASSED
MCU Voltage 3.28v PASSED
Core Voltage 1.78v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 5.00v PASSED
Box VPP disabled
VPP Voltage 0.02v PASSED
Internal Box VPP Enabled
VPP Voltage 4.97v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work

cetech · 11-06-2009, 10:27

Updating Security Area...
Security Area Updated, Took: 0.110s
Updating Main Firmware...
Main Firmware Updated, Took: 10.844s
Disconnected from Cyclone Server
Box Maintenance finished successfully

Box ok..

Chevka · 11-06-2009, 10:29

Thanks Now My Box have NO Problem entering Main Mode

Box Maintenance procedure started at 4:23:17 PM
Handling device: [Cyclone Team], [Cyclone Bootloader]
Bootloader: Cyclone Secure Bootloader v2.08, (Nov 14 2008 12:05:50), Type: Signed Production

Application, For HW Rev E
Service Tag: A1B6B831B21F5D47EE7F915739307BC2
Connecting to Cyclone Server
Cyclone Server (1.0.0.485), Cyclone Box Team 2008, 2009 - Ready.
========= Box Info =========
Box SN: C0000A32
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: D2000xxx
First Name: chevka
Surname: konstantinev
Nickname: chevka
Address: xxxxxxxxxx
Country: xxxxxxxxx
E-Mail: [email protected]
Reseller: GPGIndustries, China
Warranty Start Date: 2009-07-22
Warranty Period (months): 6
Warranty Stop Date: 2010-01-22
Warranty active: Yes
============================
Updating Security Area...
Security Area Updated, Took: 0.63s
Updating Main Firmware...
Main Firmware Updated, Took: 7.453s
Disconnected from Cyclone Server
Box Maintenance finished successfully

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0),

Type: Signed Production Application
Box Serial Number: C0000A32
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27
Initializing security card...
Card Serial Number: D2000xxx
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4.98v PASSED
MCU Voltage 3.30v PASSED
Core Voltage 1.76v PASSED
VBAT Voltage 0.01v PASSED
VBAT Voltage 4.88v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.77v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work

software zone · 11-06-2009, 10:32

Box Maintenance procedure started at 1:25:29 AM
Handling device: [Cyclone Team], [Cyclone Box]
Handling device: [Cyclone Team], [Cyclone Bootloader]
Bootloader: Cyclone Secure Bootloader v2.08, (Nov 14 2008 12:05:50), Type: Signed Production Application, For HW Rev E
Service Tag: BA764A95B941B269819B1738FBA6BF81
Connecting to Cyclone Server
Cyclone Server (1.0.0.485), Cyclone Box Team 2008, 2009 - Ready.
========= Box Info =========
Box SN: C0000237
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: D0000151
First Name: muhammad
Surname: muhammad ijaz
Nickname: ijaz
Address: mardan
Country: pakistan
E-Mail: [email protected]
Reseller: TechMobile, Pakistan
Warranty Start Date: 2009-03-31
Warranty Period (months): 6
Warranty Stop Date: 2009-09-30
Warranty active: No
============================
Updating Security Area...
Security Area Updated, Took: 0.62s
Updating Main Firmware...
Main Firmware Updated, Took: 7.656s
Disconnected from Cyclone Server
Box Maintenance finished successfully

but lost super dct4 activation i pm to you but still i have the problem.i already activat b4.

here is my box log

Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application
Box Serial Number: C0000237
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: D0000151
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.03v PASSED
MCU Voltage 3.27v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 0.00v PASSED
VBAT Voltage 4.96v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 4.88v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
External Box VPP Enabled
VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: FALSE
Initializing FBUS...
All initialized - Ready to work

now dont have more log for activation

digiphone · 11-06-2009, 10:35

Work fine ............

Code:

============================
Updating Security Area...
Security Area Updated, Took: 0.125s
Updating Main Firmware...
Main Firmware Updated, Took: 11.93s
Disconnected from Cyclone Server
Box Maintenance finished successfully

Code:

Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5,05v PASSED
MCU Voltage 3,24v PASSED
Core Voltage 1,83v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,91v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,90v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work

nokia-ps · 11-06-2009, 10:35

thank you all ok thanx.

11-06-2009, 09:47	#1 (permalink)
SiRoYa No Life Poster Join Date: Oct 2002 Age: 39 Posts: 8,376 Member: 16107 Status: Offline Sonork: 100.58402 Thanks Meter: 26,411	06-11-2009 New Cyclonebox Firmware Released New Cyclonebox Nokia firmware is uploaded to our server. Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application - Fixed permamently bug which prevented box starting main firmware (only bootloader...) - Added LED-progress upon Main Firmware Boot ; this will help to diagnose bootup problems in future; meanings of LED blinking upon startup below - Code Optimizations - RTOS Code Updated to 6.0.0 - GCC Compiler Updated to 4.3.2 - Device Framework Updated to 1.5.0 - Little Bugfixes Firmware 01.0A LEDs Meaning upon Main Firmware startup GREEN, BLUE, RED, ORANGE Firmware Starting - Initializing Interrupts and PLL Clocks (at this stage check 12MHZ Crystals) GREEN, RED, ORANGE Initializing HW Modules, RTC (at this stage check RTC Clock) RED, ORANGE Doing Security Checkup (Should not hang here) ORANGE Initializing USB Stack (Check crystals, USB Cable Length, etc) NO LEDS Firmware Booted wbr CycloneBox Team Last edited by SiRoYa; 11-06-2009 at 11:21.

11-06-2009, 09:50	#2 (permalink)
supportallgsm No Life Poster Join Date: Oct 2005 Location: supportallgsm Age: 55 Posts: 663 Member: 194074 Status: Offline Sonork: 100.1574944 Thanks Meter: 164	Thanks............... Updating Security Area... Security Area Updated, Took: 0.110s Updating Main Firmware... Main Firmware Updated, Took: 11.125s Disconnected from Cyclone Server Box Maintenance finished successfully Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Handling device: [Cyclone Team], [Cyclone Box] Initializing box... Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application Last edited by supportallgsm; 11-06-2009 at 09:57.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
06-11-2009 New Cyclonebox Firmware Released	SiRoYa	Service Products News & Updates	1	11-06-2009 11:27
28-10-2009 New Cyclonebox firmware Released	karwos	Cyclonebox	165	11-06-2009 09:49
28-10-2009 New Cyclonebox firmware Released	SiRoYa	Service Products News & Updates	0	10-28-2009 21:50

11-06-2009, 09:53	#4 (permalink)
79mobile Freak Poster Join Date: May 2006 Location: On The Way Age: 49 Posts: 464 Member: 272091 Status: Offline Sonork: 100:114011 Thanks Meter: 129	Thanks for help my box. br.,

11-06-2009, 09:58	#5 (permalink)
GSMSERVE No Life Poster Join Date: Sep 2004 Location: Setif ALGERIA Age: 44 Posts: 817 Member: 80990 Status: Offline Sonork: 100.1583974 Thanks Meter: 312	============================ Updating Security Area... Security Area Updated, Took: 0.125s Updating Main Firmware... Main Firmware Updated, Took: 11.62s Disconnected from Cyclone Server Box Maintenance finished successfully

11-06-2009, 10:09	#6 (permalink)
.:Towhid:. No Life Poster Join Date: Jul 2006 Location: Comilla Age: 42 Posts: 793 Member: 304260 Status: Offline Sonork: 100.1593127 Thanks Meter: 355	That's Very Good, Previous update was many problem............................

11-06-2009, 10:10	#7 (permalink)
newfoundghori No Life Poster Join Date: Aug 2007 Location: Promise Land, Age: 34 Posts: 1,646 Member: 575597 Status: Offline Sonork: 100.1590575 Thanks Meter: 559	what is new for that box firmware!!!

11-06-2009, 10:11	#8 (permalink)
rock23 Cheater -Don't Deal with him- Join Date: Jan 2008 Location: around the globe... Posts: 1,207 Member: 677681 Status: Offline Sonork: 100.1590886 Thanks Meter: 232	tnx update successfull now my box kicking again tnx mr siroya bro rock23

11-06-2009, 10:21	#9 (permalink)
T0T0 Registered User Join Date: Aug 2007 Location: bohol philippines Age: 42 Posts: 1,031 Member: 572549 Status: Offline Thanks Meter: 175	heres mine... Updating Security Area... Security Area Updated, Took: 0.125s Updating Main Firmware... Main Firmware Updated, Took: 10.890s Disconnected from Cyclone Server Box Maintenance finished successfully

11-06-2009, 10:22	#10 (permalink)
bb5 user Freak Poster Join Date: Apr 2008 Location: HALIFAX UK Age: 36 Posts: 237 Member: 742915 Status: Offline Thanks Meter: 49	Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Handling device: [Cyclone Team], [Cyclone Box] Initializing box... Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application Box Serial Number: C000xxxx HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk19 Initializing security card... Card Serial Number: D000xxx Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 5.02v PASSED MCU Voltage 3.28v PASSED Core Voltage 1.78v PASSED VBAT Voltage 0.01v PASSED VBAT Voltage 5.00v PASSED Box VPP disabled VPP Voltage 0.02v PASSED Internal Box VPP Enabled VPP Voltage 4.97v PASSED Box VPP disabled VPP Voltage 0.04v PASSED External Box VPP Enabled VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Super DCT4 Activation: TRUE Initializing FBUS... All initialized - Ready to work

11-06-2009, 10:27	#11 (permalink)
cetech No Life Poster Join Date: Mar 2006 Location: Philippines Posts: 511 Member: 252201 Status: Offline Thanks Meter: 148	Updating Security Area... Security Area Updated, Took: 0.110s Updating Main Firmware... Main Firmware Updated, Took: 10.844s Disconnected from Cyclone Server Box Maintenance finished successfully Box ok..

11-06-2009, 10:29	#12 (permalink)
Chevka No Life Poster Join Date: Sep 2004 Location: NeverL@Nd Posts: 758 Member: 82106 Status: Offline Thanks Meter: 1,208	Thanks Now My Box have NO Problem entering Main Mode Box Maintenance procedure started at 4:23:17 PM Handling device: [Cyclone Team], [Cyclone Bootloader] Bootloader: Cyclone Secure Bootloader v2.08, (Nov 14 2008 12:05:50), Type: Signed Production Application, For HW Rev E Service Tag: A1B6B831B21F5D47EE7F915739307BC2 Connecting to Cyclone Server Cyclone Server (1.0.0.485), Cyclone Box Team 2008, 2009 - Ready. ========= Box Info ========= Box SN: C0000A32 HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27 Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty Box registration status: Registered OK Paired Card SN: D2000xxx First Name: chevka Surname: konstantinev Nickname: chevka Address: xxxxxxxxxx Country: xxxxxxxxx E-Mail: [email protected] Reseller: GPGIndustries, China Warranty Start Date: 2009-07-22 Warranty Period (months): 6 Warranty Stop Date: 2010-01-22 Warranty active: Yes ============================ Updating Security Area... Security Area Updated, Took: 0.63s Updating Main Firmware... Main Firmware Updated, Took: 7.453s Disconnected from Cyclone Server Box Maintenance finished successfully Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Handling device: [Cyclone Team], [Cyclone Box] Initializing box... Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application Box Serial Number: C0000A32 HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk27 Initializing security card... Card Serial Number: D2000xxx Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 4.98v PASSED MCU Voltage 3.30v PASSED Core Voltage 1.76v PASSED VBAT Voltage 0.01v PASSED VBAT Voltage 4.88v PASSED Box VPP disabled VPP Voltage 0.04v PASSED Internal Box VPP Enabled VPP Voltage 4.77v PASSED Box VPP disabled VPP Voltage 0.04v PASSED External Box VPP Enabled VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Super DCT4 Activation: TRUE Initializing FBUS... All initialized - Ready to work

11-06-2009, 10:32	#13 (permalink)
software zone No Life Poster Join Date: Apr 2007 Location: nothing Posts: 1,543 Member: 494167 Status: Offline Thanks Meter: 292	Box Maintenance procedure started at 1:25:29 AM Handling device: [Cyclone Team], [Cyclone Box] Handling device: [Cyclone Team], [Cyclone Bootloader] Bootloader: Cyclone Secure Bootloader v2.08, (Nov 14 2008 12:05:50), Type: Signed Production Application, For HW Rev E Service Tag: BA764A95B941B269819B1738FBA6BF81 Connecting to Cyclone Server Cyclone Server (1.0.0.485), Cyclone Box Team 2008, 2009 - Ready. ========= Box Info ========= Box SN: C0000237 HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32 Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty Box registration status: Registered OK Paired Card SN: D0000151 First Name: muhammad Surname: muhammad ijaz Nickname: ijaz Address: mardan Country: pakistan E-Mail: [email protected] Reseller: TechMobile, Pakistan Warranty Start Date: 2009-03-31 Warranty Period (months): 6 Warranty Stop Date: 2009-09-30 Warranty active: No ============================ Updating Security Area... Security Area Updated, Took: 0.62s Updating Main Firmware... Main Firmware Updated, Took: 7.656s Disconnected from Cyclone Server Box Maintenance finished successfully but lost super dct4 activation i pm to you but still i have the problem.i already activat b4. here is my box log Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.7918 Handling device: [Cyclone Team], [Cyclone Bootloader] Handling device: [Cyclone Team], [Cyclone Box] Initializing box... Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application Box Serial Number: C0000237 HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32 Initializing security card... Card Serial Number: D0000151 Card Firmware Revision: 0109 Card is activated Box is activated Started box selftests procedure USB Voltage 5.03v PASSED MCU Voltage 3.27v PASSED Core Voltage 1.80v PASSED VBAT Voltage 0.00v PASSED VBAT Voltage 4.96v PASSED Box VPP disabled VPP Voltage 0.04v PASSED Internal Box VPP Enabled VPP Voltage 4.88v PASSED Box VPP disabled VPP Voltage 0.04v PASSED External Box VPP Enabled VPP Voltage 0.02v FAILED - IGNORED - Probably power supply is not connected Box VPP disabled All box selftests passed! Super DCT4 Activation: FALSE Initializing FBUS... All initialized - Ready to work now dont have more log for activation

11-06-2009, 10:35	#15 (permalink)
nokia-ps No Life Poster Join Date: Jun 2008 Location: **** Age: 45 Posts: 894 Member: 801286 Status: Offline** Sonork: [email protected] Thanks Meter: 54	thank you all ok thanx.