Write firmware logs:
Code:
INFO : 13.01.2014 11:13:50 > To connect SHV-E160S phone you have to perform the following steps:
INFO : 13.01.2014 11:13:50 > 1. Go to dial window.
INFO : 13.01.2014 11:13:50 > 2. Enter "319712358" number.
INFO : 13.01.2014 11:13:50 > 3. Enter "996412" password.
INFO : 13.01.2014 11:13:50 > 4. Go to System->SIO mode.
INFO : 13.01.2014 11:13:50 > 5. Select "Modem" radio button for USB section.
INFO : 13.01.2014 11:13:50 > 6. Go to dial window.
INFO : 13.01.2014 11:13:50 > 7. Enter "*#9090#" number.
INFO : 13.01.2014 11:13:50 > 8. Set "Diag config" to "USB" value.
INFO : 13.01.2014 11:13:50 > 9. Restart phone.
INFO : 13.01.2014 11:13:50 > 10. Press "Read Info" in software.
INFO : 13.01.2014 11:13:54 > Selected firmware file: E160S.UH24.1912_CL966809_REV02_ROOTED.oct
WARN : 13.01.2014 11:13:58 > Please switch your phone to the download mode and connect it to a PC.
WARN : 13.01.2014 11:13:58 > To put SHV-E160S phone into download mode you have to perform the following steps:
WARN : 13.01.2014 11:13:58 > 1. Reconnect phone battery.
WARN : 13.01.2014 11:13:58 > 2. Press and hold "Volume - " + "Home" + "Power" buttons.
WARN : 13.01.2014 11:13:58 > 3. When phone turns on press "Volume+" button.
INFO : 13.01.2014 11:13:58 > Found phone on
INFO : 13.01.2014 11:13:58 > Firmware write started.
INFO : 13.01.2014 11:13:58 > Writing BOOT section...
INFO : 13.01.2014 11:14:02 > BOOT section has been written successfully.
INFO : 13.01.2014 11:14:02 > Writing RECOVERY section...
INFO : 13.01.2014 11:14:05 > RECOVERY section has been written successfully.
INFO : 13.01.2014 11:14:05 > Writing MODEM section...
INFO : 13.01.2014 11:14:15 > MODEM section has been written successfully.
INFO : 13.01.2014 11:14:15 > Writing MDM section...
INFO : 13.01.2014 11:14:26 > MDM section has been written successfully.
INFO : 13.01.2014 11:14:26 > Writing SYSTEM section...
INFO : 13.01.2014 11:18:27 > SYSTEM section has been written successfully.
INFO : 13.01.2014 11:18:33 > Firmware writing successfully completed.