My *******r came at my shop and she showed me her DTC GT5s has a password. So for me to make sure i read the firmware of the phone to make sure it safe just in case there is something happen informating " format the user data ", but it gives me headache . after read flash firmware successfully the phone won't power up . i tried to restore the backup firmware that i read but it has a error ..
i've search there a lot who success format the dtc gt5s but at d same time i want to collect a flash file but now here a have a big problem
this is not the first time i face this issue last week i read the firmware of cherry mobile spark and i became dead after reading but i successfully revive it in researchdownload sprd flasher and the .pac file
here is the pic of phone
http://4.bp.********.com/-q4TiX9r3YO...nd%2BSpecs.JPG
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:7,
Signal Pin:1, 3, 4, 5,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:4 D-:3
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM16
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:0000ECBC
Flash Size:20000000->512M
Flash Name:NAND_SamSungK9K4G16Q0M
CPU Name:6820/8810
>>> -Analyzing Flash File...
Get Flash Format: User Read Full Flash...
Flash Size:0X1FFE0000->511M
>>> Decompressing file...
NV_ADD :0x00C84800 SIZE: 0x0000D1B0
SPL_ADD :0x00000000 SIZE: 0x00042000
UBOOT_ADD :0x00000000 SIZE: 0x00063EFC
VMG_ADD :0x001C0000 SIZE: 0x0003D000
MODEM_ADD :0x00240000 SIZE: 0x003C3DC2
DSP_ADD :0x013C0000 SIZE: 0x001E0000
BOOT_IMG_ADD:0x01C80000 SIZE: 0x006A7800
REC_IMG_ADD :0x02680000 SIZE: 0x006A9800
SYSTEM_ADD :0x03080000 SIZE: 0x08365800
USER_ADD :0x1ABE8000 SIZE: 0x00000800
BOOTLOGO_ADD:0x00000000 SIZE: 0x01000000
Special remind:if you tick the system,maybe it will kill your phone!!!
Waiting For Your Confirmation...
>>> Writing Flash File...
Write_UBOOT...
Write_VMG...
Write_MODEM...
Write_DSP...
Write_BOOT_IMG...
Write_REC_IMG...
Write_SYSTEM...
>>> Return DATA Error!!!
Terminated...
i have the backup could any one can extract the reade file from gpg to Pac file to flash it to
researchdownload sprd flasher andriod
plz help me thanks..