GSM-Forum - View Single Post - Gt-i9100 repairing error

hamim ctg · 03-01-2014, 07:32

Im trying to repair i9100 , it gives me following error

EasyJtag Suite ver.: 1.0.99.0 started.
Operating system ver.: Windows 7 (build 7600).
Successefuly connected to box on COM8
Box S/N: 06FFD0150B3153E2, ,FW Ver.: 01.48
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : AA7D-3067 , ver: 22
Config set from shell : Vendor:SAMSUNG Model:GT-I9000
Loading repair file: 'C:\Users\National Mobile\Desktop\I9100\New folder\Samsung GT-i9100.rcp'
Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9100, Ver.: 1.00
Error loading information!
Easy-Repair file load OK!
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.99.0 started.
Operating system ver.: Windows 7 (build 7600).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9100 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 06FFD0150B3153E2 ,FW Ver.: 01.48
Connecting to Target...
Done with error(s)...
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.99.0 started.
Operating system ver.: Windows 7 (build 7600).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9100 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 06FFD0150B3153E2 ,FW Ver.: 01.48
Connecting to Target...
Done with error(s)...
Using EasyRepair Mode...
Checking repair data...
EasyJtag Suite ver.: 1.0.99.0 started.
Operating system ver.: Windows 7 (build 7600).
For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device.
Initialising: SAMSUNG GT-I9100 Config ver.:1.00
I/O Level set to : 2800 mV
Box S/N: 06FFD0150B3153E2 ,FW Ver.: 01.48
Connecting to Target...
JTAG device: S5PC210
CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4
CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9
Halting CPU...
Init target ...
Starting target communication...
Detecting emmc memory parameters of bank (0) ...
EMMC #0 : ID : 0x00010015 Name : VIS00M Size : 14.7 G , (30777344) Blocks
EMMC #1 : ID : 0x00010000 Name : VIS00M Size : 512.0 K , (1024) Blocks
eMMC flash device(s) found, Device ID : 0x00150001
NAND Writing GPT...
eMMC Write OK! Elapsed time: 29.774702s (137.566 KiB/s)
NAND Writing SBL1...
eMMC Write OK! Elapsed time: 18.695068s (68.467 KiB/s)
NAND Writing SBL2...
eMMC Write OK! Elapsed time: 19.026089s (67.276 KiB/s)
NAND Writing PARAM...
eMMC Write OK! Elapsed time: 72.109123s (113.606 KiB/s)
NAND Writing ROM2...
Timeout Error while reading approx : 0x00000100 bytes over DCC
Unknown DCC answer /PROTOCOL/
Failed writing file ROM2.BIN to eMMC flash 1 at offset 0x00000000
All Done.

03-01-2014, 07:32	#1 (permalink)
hamim ctg Freak Poster Join Date: Dec 2013 Posts: 205 Member: 2095587 Status: Offline Thanks Meter: 36	Gt-i9100 repairing error Im trying to repair i9100 , it gives me following error EasyJtag Suite ver.: 1.0.99.0 started. Operating system ver.: Windows 7 (build 7600). Successefuly connected to box on COM8 Box S/N: 06FFD0150B3153E2, ,FW Ver.: 01.48 Box Working Mode: JTAG Box. Box Drivers version: 3.0.0.0, are OK Z3X Card Serial : AA7D-3067 , ver: 22 Config set from shell : Vendor:SAMSUNG Model:GT-I9000 Loading repair file: 'C:\Users\National Mobile\Desktop\I9100\New folder\Samsung GT-i9100.rcp' Repair File ver. : Easy Repair for Mfg: SAMSUNG Model: GT-I9100, Ver.: 1.00 Error loading information! Easy-Repair file load OK! Using EasyRepair Mode... Checking repair data... EasyJtag Suite ver.: 1.0.99.0 started. Operating system ver.: Windows 7 (build 7600). For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device. Initialising: SAMSUNG GT-I9100 Config ver.:1.00 I/O Level set to : 2800 mV Box S/N: 06FFD0150B3153E2 ,FW Ver.: 01.48 Connecting to Target... Done with error(s)... Using EasyRepair Mode... Checking repair data... EasyJtag Suite ver.: 1.0.99.0 started. Operating system ver.: Windows 7 (build 7600). For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device. Initialising: SAMSUNG GT-I9100 Config ver.:1.00 I/O Level set to : 2800 mV Box S/N: 06FFD0150B3153E2 ,FW Ver.: 01.48 Connecting to Target... Done with error(s)... Using EasyRepair Mode... Checking repair data... EasyJtag Suite ver.: 1.0.99.0 started. Operating system ver.: Windows 7 (build 7600). For support and updates visit EasyJtag , just better ? - New powerful JTAG unbrick device. Initialising: SAMSUNG GT-I9100 Config ver.:1.00 I/O Level set to : 2800 mV Box S/N: 06FFD0150B3153E2 ,FW Ver.: 01.48 Connecting to Target... JTAG device: S5PC210 CPU IDCODE : 0x4BA00477 Mfg.: 0x23b, Part: 0xba00, Ver.: 0x4 CPU Manufacturer: QUALCOMM , CPU Name: CORTEX A9 Halting CPU... Init target ... Starting target communication... Detecting emmc memory parameters of bank (0) ... EMMC #0 : ID : 0x00010015 Name : VIS00M Size : 14.7 G , (30777344) Blocks EMMC #1 : ID : 0x00010000 Name : VIS00M Size : 512.0 K , (1024) Blocks eMMC flash device(s) found, Device ID : 0x00150001 NAND Writing GPT... eMMC Write OK! Elapsed time: 29.774702s (137.566 KiB/s) NAND Writing SBL1... eMMC Write OK! Elapsed time: 18.695068s (68.467 KiB/s) NAND Writing SBL2... eMMC Write OK! Elapsed time: 19.026089s (67.276 KiB/s) NAND Writing PARAM... eMMC Write OK! Elapsed time: 72.109123s (113.606 KiB/s) NAND Writing ROM2... Timeout Error while reading approx : 0x00000100 bytes over DCC Unknown DCC answer /PROTOCOL/ Failed writing file ROM2.BIN to eMMC flash 1 at offset 0x00000000 All Done.