.... after "live timer reset", It is not fair, no?
After flash with latest firmware is still the same"
Code:
MXKEY [FT SCR2000 0], SN: C080B930
Using device: USB ROM
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.115
Module ver: 1.0.0.21724(14-05-2013), Library ver: 1.0.0.14397(09-05-2013)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device connected: nmwcdnsuc\Nokia USB Flashing Generic, PORT_ID: 337E2F2B
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 00EC 3012 - 23280002 [Samsung ]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35835xxxxxxxxx441
RPL backup already exist (C:\mobileEx\3.5\data\backup\XGOLD_3583xxxxxxxxxx2441_back.RPL)
Processing file: rm724__08.87.mcusw
Downloading item CODE:rm724__08.87.mcusw_ebl_psi.fls, num block: 4, size: 25.50 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.475 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.547 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 2.148 s
Erasing area 0x40280000-0x41ABFFFE ...OK
Programming completed in 57.473 s
Checksum verified (0xB866)
Processing file: rm724__08.87.ppm_b
Downloading item CUST:package_b.ppm_ebl_psi.fls, num block: 1, size: 4.36 MB
Erasing area 0x41B40000-0x41F9B242 ...OK
Programming completed in 9.178 s
Checksum verified (0x8541)
Processing file: rm724__08.87.image_b_dgray_059F9X3
Downloading item CUST:package_b_dgray_059F9X3.image.fl , num block: 1, size: 14.75 MB
Erasing area 0x42240000-0x43E1FFFE ...OK
Programming completed in 25.039 s
Checksum verified (0x9C2D)
Total time for flashing process(boot+erase+write) was 5 min 25.157 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia C2-05 USB Phonet, PORT_ID: 358xxxxxxxxx924411
Verifying communication to device OK.
Phone type: RM-724 (C2-05)
SW version: V 08.87 17-10-12 RM-724 (c) Nokia
Imei plain: 358xxxxxxxxxx441-1
Product code: 059G0M8
Language Pack:
- not available.
SIMLOCK_DATA corrupted!
What can I do next? I've readed PM but after this.
I also have got 2 pieces of working c2-05. Can I write PM from one of those to my dead Nokia?
Emilkawa