Quote:
Originally Posted by Smart-gsm  Thanks for info ...
We try to find the phone with these Flash IDs in our local market . As soon as i will reply you . or i will try contact you in yahooo . for remote testing ...
if you found any other phones with diffrent flash ID of SC6530 . Please report us ..
Is this phones Are brand in your country ? |
Again MAXTRON MG-537 sprd 6530 Dead After Format, Write Flash Failed
LOG here
Code:
Chip=SpreadTrum
Action=WriteFlash
FlashType=NOR
boot=6530
Expert Mode=Disable
Range[start]=0x0007B00
Range[size]=0x00800000
Interface=COM
FlashFile=E:\2. AVATOR\Backup File\Maxtron_MG-537_SC6530_SF_GD27Q64.bin
Comport=COM44
Baudrate=921600
CPU_Type=SC6530
CPU_ID=65300000
NOR_ID=00C8006000170000
NOR_Size=8MB
NOR_Name=SF_GD27Q64
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=
Initializing...
DA_LIB_VER_5.6.1.1
It is sensing the pinout fast...
RXD=5 TXD=6
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6530000000006A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Support br115200 on SC6610/20 & SC6530 only.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6530 Flash: SF_GD27Q64
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
Error: Failed to read ACK.
+++++++++++++++++++End at: 4/13/2014 12:55:48 PM+++++++++++++++++++
-------------------Created: 4/13/2014 12:56:00 PM-------------------
Chip=SpreadTrum
Action=WriteFlash
FlashType=NOR
boot=6530
Expert Mode=Disable
Range[start]=0x0007B00
Range[size]=0x00800000
Interface=COM
FlashFile=E:\2. AVATOR\Backup File\Maxtron_MG-537_SC6530_SF_GD27Q64.bin
Comport=COM44
Baudrate=460800
CPU_Type=SC6530
CPU_ID=65300000
NOR_ID=00C8006000170000
NOR_Size=8MB
NOR_Name=SF_GD27Q64
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=
Initializing...
DA_LIB_VER_5.6.1.1
It is sensing the pinout fast...
RXD=5 TXD=6
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6530000000006A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Support br115200 on SC6610/20 & SC6530 only.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6530 Flash: SF_GD27Q64
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
Error: Failed to read ACK.
+++++++++++++++++++End at: 4/13/2014 12:56:41 PM+++++++++++++++++++
Is it possible to get a solution other than waiting for software update that requires a long time ?