Put Flash IC to SC6610 phone than write firmware
Code:
Initializing...
DA_LIB_VER_5.6.1.1
It is sensing the pinout fast...
RXD=5 TXD=6
Connecting...
Connected...sending boot...
FDL test...OK
SC66x0 Unsupport OmnipotentMode in this time.
ArmBootMode: 6610000000006A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Support br115200 on SC6610/20 & SC6530 only.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD27Q64
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=320812010411495
IMEI 2=910575601400468
------Auto Format Address-------
Start=0x005D8000
Size =0x00228000
Read FS info...done
Initializing...
DA_LIB_VER_5.6.1.1
It is sensing the pinout fast...
RXD=5 TXD=6
Connecting...
Connected...sending boot...
FDL test...OK
SC66x0 Unsupport OmnipotentMode in this time.
ArmBootMode: 6610000000006A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Support br115200 on SC6610/20 & SC6530 only.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD27Q64
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.