View Single Post
Old 04-15-2014, 15:51   #3 (permalink)
kpkgsm
Freak Poster
 
kpkgsm's Avatar
 
Join Date: Apr 2014
Location: Pakistan
Age: 26
Posts: 329
Member: 2164664
Status: Offline
Sonork: 100.1654214
Thanks Meter: 119
Or Try This 100% OK


1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Put your phone into download mode: Press Volume down + OK + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.

Attachment 273456

7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.

Attachment 273457
13. Do not touch anything till you see PASS on the program window.
14. Just do a factory reset after flashing using recovery

Link :
Hotfile.com: One click file hosting: I9003JPKP5.rar
Hotfile.com: One click file hosting: latona_20110114.pit
http://forum.xda-developers.com/atta...0&d=1300864802

Enjoy
  Reply With Quote
The Following User Says Thank You to kpkgsm For This Useful Post:
 
Page generated in 0.08114 seconds with 7 queries