View Single Post
Old 04-24-2014, 06:04   #7 (permalink)
austin0
No Life Poster
 
Join Date: Feb 2014
Location: gsm
Posts: 635
Member: 2131081
Status: Offline
Sonork: 76543322223
Thanks Meter: 92
ok,
resurrected with Great Riff and flash with ATF with same flash file

Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Nokia Lumia 820 V1.0.5040.65102]

Connecting to the dead body...OK
Detected dead body ID: 0x706B40E1 - IGNORED!
Set I/O Voltage reads as 1.80V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (008G4B, 0x0001DA000000 Bytes = 7.41 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (008G4B, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 7.41GB

Flashing the dead body...OK
Resurrection complete!
Quote:
Windows Phone 8 Flashing Started
Loading Flash Files Please Wait...

================================================== ====
Windows Phone 8 Lumia Flasher
================================================== ====

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Connect Phone to the USB Port
2. Press and Hold the VOLUME DOWN and POWER Buttons
3. Wait until the Phone Vibrates Shortly...
4. Stop Pressing the Buttons...
================================================== ====

Version: 1.1.1.2
Product Code: 059R0H7
Module Code: 0205162

Boot Flash Mode Successful...

Phone Info Query Start...
Blocks Returned: 0x07 Blocks
Block ID 0x01 : 00241000
Block ID 0x02 : 00240000
Block ID 0x03 : 00ED0000
Block ID 0x05 : Nokia.MSM8960.P5174.3.2.1
Block ID 0x0D : 0001
Block ID 0x0F : 0301010100000101FF
Block ID 0x10 : 0100030000
Checking SD Card Size...
Card Size: 0x00000000
Checking Platform Security Status...
Platform Secure Boot Status: Active
Secure FFU EFUSE Status: Active
Debug Status: Active
RDC Status: Not Active
Authentication Status: Not Active
UEFI Secure Boot Status: Active
Checking Secure FFU Mode...
Secure FFU Mode : SYNC + ASYNC
Query Flash App Information...
Flash App Information: 020109011000
UEFI App: FLASH APP
Flash App Protocol Version: 1.9
Flash App Implementation Version: 1.16
Query ROOT KEY HASH...
ROOT_KEY_HASH: DB73418E5840941CE7BD35949085B8F74628D511F19285A092 ED3B600A64CC29

Sending Image Signatures...
Image Signatures Accepted!
Erasing Data Partition...
Data Partition Erased Successfully
Preparing Buffers for DATA LOOP...
Allocating System RAM OK!
Start Sending DATA BLOCKS...
Finished Sending all DATA BLOCKS!
Exiting FLASH Mode via REBOOT...
Exit FLASH Mode Successful!

Flashing Done!
Total Flashing Time : 00:02:24
 
 
Page generated in 0.06845 seconds with 7 queries