Huawei U5130 Phone Unlock thanks hack3r2k for your assistance
Format File System Code:
Using library Brom_DLL_v5.1316.1
EMI Settings Loaded;
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (@oem243.inf,%dev_single%;USB Single Port)
Preparing to start flash mode;
Connecting;
Downloading DA;
Initializing;
Requesting baudrate change;
Done;
DEVICE INFO:
BB CHIP: MT6276_S0101 [CB00, 101, 6276, FF]
MEMORY: [HYNIX] HYD0SQG0MF1P [AD:B1:00] [SIZE=0x08000000]
FAT INFO: 0x04000000 SIZE: 0x04000000
Formatting entire phone now...
Done;
Time needed - 00:00:13
Write Factory Firmware Code:
Using library Brom_DLL_v5.1316.1
EMI Settings Loaded;
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (@oem243.inf,%dev_single%;USB Single Port)
Preparing to start flash mode;
Connecting;
Downloading DA;
Initializing;
Requesting baudrate change;
Done;
DEVICE INFO:
BB CHIP: MT6276_S0101 [CB00, 101, 6276, 05]
MEMORY: [HYNIX] HYD0SQG0MF1P [AD:B1:00] [SIZE=0x08000000]
Loading the file ...
Cfg done ...
File contents to write:
[50000000-50006E13] ARM_BL
[03F00000-03F2395F] ARM_EXT_BL
[58008000-5800DFEB] DUALMAC_DSP_BL
[00180000-0031072F] PRIMARY_MAUI
[00000000-000B8FCB] DSP_ROM
[00318730-005C240F] SECONDARY_MAUI
[F4000000-F549F7F7] ON_DEMAND_PAGING
Downloading bootloader...
Done;
Downloading images...
Done;
Done;
Done;
Done;
Done;
Done;
Formatting file system now...
Done;
Time needed - 00:02:36
Remove SIM LOCK Code:
Using library Brom_DLL_v5.1316.1
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (@oem243.inf,%dev_single%;USB Single Port)
Preparing to start meta mode;
Meta mode entered;
Baseband Chip: MT6276
Sw version: U5130-7V100R001C448B201SP03S
Hw Version:
Reading phone info;
IMEI: 135790-24-681122-0
Reading security;
Done;
Checking;
ERROR: NUCC ERROR !
Time needed - 00:01:09
Using MTKReader
Check "Huawei ....." then press "SCAN PORTS" and plug phone (phone must turn off) and will detect port and "READ CODE" press reconnect phone (must off)
Code:
Searching phone;
Phone detected (@oem243.inf,%dev_single%;USB Single Port)
Preparing to start meta mode;
COM opened ok;
Phone must be powered off;
Keep pressing the power button if serial used !
(for USB connection keep SPACE or * (STAR) key pressed and insert the usb cable)
Connecting;
Meta mode entered;
Baseband Chip: MT6276
Sw version: U5130-7V100R001C448B201SP03S
Hw Version:
Reading phone info;
IMEI: 135790-24-681122-0
Reading simlock info;
Unlock codes:
Locked to: C1C-1C
code_cat_n: 12345678 enabled: no tries: 255
code_cat_ns: 56781234 enabled: yes tries: 255
code_cat_sp: 11112222 enabled: no tries: 255
code_cat_c: 33334444 enabled: no tries: 255
code_cat_sim: 55556666 enabled: no tries: 255
code_cat_ns_sp: 77778888 enabled: no tries: 255
code_cat_sim_c: 99990000 enabled: no tries: 255
Time needed - 00:03:15