GSM-Forum - View Single Post

yassino005 · 05-14-2014, 18:37

Default language ID 0x040C
JTAG Interface Connected, S/N 0xB0DB3225
Resetting and Exploring JTAG chain...No Devices found in Chain!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 02/12/2013 10:01:00

================================================== ========
Phone Type : Lumia 610 RM-835 - Supported
: Lumia 610 RM-849 - Supported
: Lumia 610C RM-836 - Supported
: Lumia 510 RM-889 - Supported
: Lumia 510 RM-898 - Supported
: Lumia 505 RM-923 - Supported
Unlock Type : Read PIN and PUK Unlock Codes
Other Notes : Disconnect USB Cable before Reading Codes
================================================== ========
1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect RJ-45 JTAG Cable to ATF Box
4. Disconnect USB Cable from the Phone
5. DO NOT click RESET JTAG button
6. Click RESTORE BOOT button, then Connect USB Cable
----------------------------------------------------------
Waiting for Device Connection 10 second(s)...Timeout During Operation!
Waiting for Device Connection 10 second(s)...Timeout During Operation!
Waiting for Device Connection 10 second(s)...Timeout During Operation!
Waiting for Device Connection 10 second(s)...Timeout During Operation!
Waiting for Device Connection 10 second(s)...Timeout During Operation!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 26/11/2013 10:48:00

================================================== ========
Phone Type : Lumia 610 RM-835 - Supported
: Lumia 610 RM-849 - Supported
: Lumia 610C RM-836 - Supported
Unlock Type : Read PIN and PUK Unlock Codes
Other Notes : Disconnect USB Cable before Reading Codes
================================================== ========
1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect RJ-45 JTAG Cable to ATF Box
4. Disconnect USB Cable from the Phone
5. DO NOT click RESET JTAG button
6. Click READ CODES button to Start Reading Unlock Codes
----------------------------------------------------------
Disconnect USB Cable from Phone (If Connected)
Re-Connect USB Cable to Phone...
Connect USB Cable to Phone...OK
USB Connected! Waiting for First Event...OK
Disconnect USB Cable Now...OK
Re-Connect USB Cable to Phone...
Waiting for Device Connection 10 second(s)...Timeout During Operation!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 26/11/2013 10:48:00

================================================== ========
Phone Type : Lumia 610 RM-835 - Supported
: Lumia 610 RM-849 - Supported
: Lumia 610C RM-836 - Supported
Unlock Type : Read PIN and PUK Unlock Codes
Other Notes : Disconnect USB Cable before Reading Codes
================================================== ========
1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect RJ-45 JTAG Cable to ATF Box
4. Disconnect USB Cable from the Phone
5. DO NOT click RESET JTAG button
6. Click READ CODES button to Start Reading Unlock Codes
----------------------------------------------------------
Disconnect USB Cable from Phone (If Connected)
Re-Connect USB Cable to Phone...
Connect USB Cable to Phone...OK
USB Connected! Waiting for First Event...OK
Disconnect USB Cable Now...OK
Re-Connect USB Cable to Phone...
Waiting for Device Connection 10 second(s)...Timeout During Operation!

05-14-2014, 18:37	#5 (permalink)
yassino005 Freak Poster Join Date: Dec 2012 Location: morroco Posts: 151 Member: 1861040 Status: Offline Sonork: 100.1626273 Thanks Meter: 22	same probleme here Default language ID 0x040C JTAG Interface Connected, S/N 0xB0DB3225 Resetting and Exploring JTAG chain...No Devices found in Chain! Loading AFP (Please Wait)...OK AFP revision 4, compiled 02/12/2013 10:01:00 ================================================== ======== Phone Type : Lumia 610 RM-835 - Supported : Lumia 610 RM-849 - Supported : Lumia 610C RM-836 - Supported : Lumia 510 RM-889 - Supported : Lumia 510 RM-898 - Supported : Lumia 505 RM-923 - Supported Unlock Type : Read PIN and PUK Unlock Codes Other Notes : Disconnect USB Cable before Reading Codes ================================================== ======== 1. Make sure JTAG Connection is 100% OK 2. Always Disconnect the Phone BATTERY 3. Connect RJ-45 JTAG Cable to ATF Box 4. Disconnect USB Cable from the Phone 5. DO NOT click RESET JTAG button 6. Click RESTORE BOOT button, then Connect USB Cable ---------------------------------------------------------- Waiting for Device Connection 10 second(s)...Timeout During Operation! Waiting for Device Connection 10 second(s)...Timeout During Operation! Waiting for Device Connection 10 second(s)...Timeout During Operation! Waiting for Device Connection 10 second(s)...Timeout During Operation! Waiting for Device Connection 10 second(s)...Timeout During Operation! Loading AFP (Please Wait)...OK AFP revision 4, compiled 26/11/2013 10:48:00 ================================================== ======== Phone Type : Lumia 610 RM-835 - Supported : Lumia 610 RM-849 - Supported : Lumia 610C RM-836 - Supported Unlock Type : Read PIN and PUK Unlock Codes Other Notes : Disconnect USB Cable before Reading Codes ================================================== ======== 1. Make sure JTAG Connection is 100% OK 2. Always Disconnect the Phone BATTERY 3. Connect RJ-45 JTAG Cable to ATF Box 4. Disconnect USB Cable from the Phone 5. DO NOT click RESET JTAG button 6. Click READ CODES button to Start Reading Unlock Codes ---------------------------------------------------------- Disconnect USB Cable from Phone (If Connected) Re-Connect USB Cable to Phone... Connect USB Cable to Phone...OK USB Connected! Waiting for First Event...OK Disconnect USB Cable Now...OK Re-Connect USB Cable to Phone... Waiting for Device Connection 10 second(s)...Timeout During Operation! Loading AFP (Please Wait)...OK AFP revision 4, compiled 26/11/2013 10:48:00 ================================================== ======== Phone Type : Lumia 610 RM-835 - Supported : Lumia 610 RM-849 - Supported : Lumia 610C RM-836 - Supported Unlock Type : Read PIN and PUK Unlock Codes Other Notes : Disconnect USB Cable before Reading Codes ================================================== ======== 1. Make sure JTAG Connection is 100% OK 2. Always Disconnect the Phone BATTERY 3. Connect RJ-45 JTAG Cable to ATF Box 4. Disconnect USB Cable from the Phone 5. DO NOT click RESET JTAG button 6. Click READ CODES button to Start Reading Unlock Codes ---------------------------------------------------------- Disconnect USB Cable from Phone (If Connected) Re-Connect USB Cable to Phone... Connect USB Cable to Phone...OK USB Connected! Waiting for First Event...OK Disconnect USB Cable Now...OK Re-Connect USB Cable to Phone... Waiting for Device Connection 10 second(s)...Timeout During Operation!