[Mobile-Repair.]

Originally Posted by smondal

Need Videocon A10 flash file.
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:20,
Signal Pin:21, 22, 23, 24,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:22 D-:23
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM92
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:0000ECBC
Flash Size:20000000->512M
Flash Name:NAND_SamSungK9K4G16Q0M
CPU Name:6820/8810
All Done...

Need Videocon A10 flash file.
Thank You
Need Yxtel G006 flash file.
IQ Doctor info

>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:20,
Signal Pin:21, 22, 23, 24,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:22 D-:23
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM11
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.1
>>> Downloading Second Boot...
Baud Rate is Switched To:921600
Flash ID:00002CBC
Flash Size:20000000->512M
Flash Name:NAND_SamSungMT29C4G48MAZAPAKD
CPU Name:6820/8810
All Done...

Volcano info

1:55:22 PM >>Internal version: SPRD3
2014-04-22 1:55:22 PM >>Boot downloading...
2014-04-22 1:55:22 PM >>Start boot please wait a moment....
2014-04-22 1:55:24 PM >>Spreadtrum Boot Block version 1.1
2014-04-22 1:55:24 PM >>Boot downloading...
2014-04-22 1:55:25 PM >>CPU TYPE:SC8810/6820 [88100001]
2014-04-22 1:55:25 PM >>Flash ID: 002C00BC90555600
2014-04-22 1:55:25 PM >>Flash Type:[Micron] MT29C4G48MAZAPAKD
2014-04-22 1:55:25 PM >>FLASH LEN:0x20000000

Thank You.

bro try this file G006 flash file link here