Originally Posted by subeesh.cp  Now its possible to write files but bad luck phone does't booted on
its done compleately no power on now any help
Skip loading eMMC Addon Firmware
CMD Pullup Level:825 mV
CMD Active Level:1072 mV
Reading S.M.A.R.T
S.M.A.R.T Ver. 0 , Card Error mode : Normal
Super Block size : 0x00800000 (8388608 bytes)
Super Page size : 0x00004000 (16384 bytes)
Optimal Write size : 0x00010000 (65536 bytes)
Read Reclaim count : 0
Optimal TRIM size : 0x00002000 (8192 bytes)
Total Number of banks : 4
Initial bad blocks per bank : 4,2,1,7
Runtime bad blocks per bank : 0,0,0,0
Reserved blocks left per bank : 47,49,50,44
All Erase counts (min,avg,max): 0,0,1
SLC Erase counts (min,avg,max): 0,0,1
MLC Erase counts (min,avg,max): 0,0,0
S.M.A.R.T Report Done !!!
Z3X EasyJtag Software ver. 1.5.2.0
Loading eMMC Addon Firmware... IO: 1850 mV
Box S/N: 04040618A0D34483, ,FW Ver.: 01.50
CMD Pullup Level:1144 mV
CMD Active Level:1526 mV
eMMC Device Information
EMMC CID : 15010056545530304DF15FDC55735FD2
EMMC CSD : D02701320F5903FFF6DBFFFF8E40406C
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 05/2012 Rev.0xf1
EMMC NAME: VTU00M , S/N: 1608275315
EMMC ROM1 (Main User Data) Capacity: 15028 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
Backup saved: VTU00M_1608275315_20140504_0937.extcsd
Done.
Running:SAMSUNG: MoviNAND Reset + Format...
Z3X EasyJtag Software ver. 1.5.2.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1144 mV
CMD Active Level:1526 mV
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Sending Internal Reconfiguration Request...
Waiting configuration Apply!!!
Restoring configuration...
EMMC ROM2/3 (Boot Partitions) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
Running:SAMSUNG: MoviNAND Factory Reset...
Skip loading eMMC Addon Firmware
CMD Pullup Level:1144 mV
CMD Active Level:1526 mV
Sending Smart Wipe Request...
Wiping Card... Please do not touch it!!!
Done.
Please don't forget to repair extCSD from backup!!!
extCSD file...C:\Program Files\Z3X\EASYJTAG\Backups\VTU00M_1608275315_20140 501_1733.extcsd
Running:Repair extCSD...
Z3X EasyJtag Software ver. 1.5.2.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1144 mV
CMD Active Level:1526 mV
Writing...
Done!
Done.
Please don't forget to repair extCSD from backup!!!
Writing file...D:\Easy Jtag Files\GT-I9300\EMMC_ROM2_2Mb_BOOT\EMMC_ROM2_00000000_002000 00.bin
Z3X EasyJtag Software ver. 1.5.2.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1144 mV
CMD Active Level:1526 mV
Writing 000000200000 bytes to 00000000 ...ROM2 (BOOT1 ROM)
Write Speed: 890 kB/s
Done !!!
Writing file...D:\Easy Jtag Files\GT-I9300\EMMC_ROM1_512Mb_USER\EMMC_ROM1_00000000_2000 0000.bin
Z3X EasyJtag Software ver. 1.5.2.0
Skip loading eMMC Addon Firmware
CMD Pullup Level:1144 mV
CMD Active Level:1526 mV
Writing 000020000000 bytes to 00000000 ...ROM1 (USER ROM)
Write Speed: 2615 kB/s
Done !!! |