GSM-Forum - View Single Post

iserlohn · 02-18-2005, 09:54

You don't need to special cable, just put a wire to short out pin 2 and 3 on your serial port. Then use your USB cable to flash.

02-18-2005, 09:54	#37 (permalink)
iserlohn Junior Member Join Date: Jan 2005 Age: 44 Posts: 3 Member: 109058 Status: Offline Thanks Meter: 0	You don't need to special cable, just put a wire to short out pin 2 and 3 on your serial port. Then use your USB cable to flash.