| bro....i have problem N7100 Blank erase...
this is log
Device Ready...
Device Ready...OK!
ID check...
Level (V): VCC V18 VCCQ D0 CMD CLK
3.3 Pullup: 0.07 0.35 0.00 0.64 0.64 0.05
Power On : 2.74 1.75 2.48 0.59 0.61 0.00
Set Low : 2.74 1.75 2.48 0.01 0.00 0.00
Set High: 2.74 1.76 2.48 2.23 2.25 2.25
...
Work Voltage: 2.74 1.75 2.48 0.59 2.24 0.00
---------------------------------------------------
eMMC ORC: C0FF8080 FF
eMMC CID: 150100303030303030562011072658
eMMC CSD: 902701320F5903FFF6DBFFEF8A4040
ID check: 00010015
Product name: 000000
User partition size: 400000000 ( 16384M / 16.000G), 17179869184 Bytes
Boot partition size: 0x80000 ( 0.5M )
RPMB partition size: 0x20000 ( 0.1M )
ID check...OK!
Erase chip...Boot1
Erase chip: 10.36 sec.
Blank check chip...Boot1
Blank check chip: 3.16 sec.
Error position of blanking in writing:
Error(1)!
Write chip lost!
The device has been disconnected.
>>------------------------------------------------------ |