i flash tht file on support still it stock pleaz upload 4.4.2
Welcome to Octoplus/Octopus Box Samsung software version 1.7.3
-----------------------------------------------------------------------------------
To connect SM-T217A phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to Calculator application. Enter "(+30012012732+" number, to get
phone dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "[1]DM/DUM over HS-USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: T217AUCUAMHC_T217AATTAMHC_ATT_USA
(AT&T)_Android_4.2.2.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-T217A into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed. |