| SigmaKey v.2.06.03
997887235 Sigma dongle 2.06, Initializing...OK
Pack 1: Not activated
--- 2014-11-01 18:51:15 ---
SigmaKey 2.06.03 Qcom: Direct unlock
ZTE Handset Diagnostic Interface (COM71), Provider: ZTE Corporation, Driver ver.: 5.2066.1.8, Date: 1/13/2011, USB\VID_19D2&PID_0010&REV_0000&MI_01
Version: ATT_AM_P671A90V1.0.0B17-S, 1.4.
Firmware: ATT_AM_P671A90V1.0.0B17-S
Date: May 25 2012 17:27:30, Feb 02 2012 18:00:00, KPSZL
IMEI: 861831003016207
Bluetooth address: C9A6B3E26DF4
Phone model: ZTE Z431
Detecting flash...HYNIX_H8BCS0SI0MBR, ID: 00AD00BA
Flash size: 256 Mb, page size: 2048
Reading security block...OK
Security area saved to "C:\Users\Zahid Gsm\Documents\SigmaKey\security backup\861831003016207_ATT_AM_P671A90V1_0_0B17-S.skb"
Unlocking phone...Done
Restarting phone...Done
Select "Qualcomm" platform from the tab menu in the upper left side of the software
"Phone model" dropdown box has to be set to "Autodetect".
Go to "Unlock" tab
Power the phone ON
Connect the phone to PC with USB cable
Install required ZTE handset USB driver (only if the phone is connected for the first time); in some cases drivers can be installed automatically
Select USB Modem port in the ports selection tab
Press "Unlock" button *
The message "Unlocking phone... Done" indicates that procedure was completed successfully
Wait for the message "Restarting phone... Done" to appear in Sigma dialog window; only after that you can turn the phone off |