GSM-Forum - View Single Post - Post Here ALL Successful Repaired Phone By Volcano/Inferno [SUCCESS REPORTS BY USERS]

razib143 · 11-06-2014, 13:58

Chinese HTM SPD Mobile Too Many Pattern lock reset done

Volcano Updated: 2014-10-13
Connecting...
Connection successful,connected state!
Version: V3.8
SN:619-078-953
Port:COM8
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM8
Current Port:COM8
Available Ports:COM7 COM8

failed to open port.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 00AD00BC90555600
Flash Type:[Hyundai] NAND_HY27UT088G2A
FLASH LEN:0x20000000
Reading...(0)
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.

Waiting for phone's response, press the Power on the phone

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 00AD00BC90555600
Flash Type:[Hyundai] NAND_HY27UT088G2A
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 200m(system),180m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 200m(system),180m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.
>>Set to Factory successfully.

11-06-2014, 13:58	#4844 (permalink)
razib143 No Life Poster Join Date: Sep 2006 Location: Dhaka Bangladesh Age: 33 Posts: 3,491 Member: 348877 Status: Offline Sonork: 1601289 Thanks Meter: 1,178	Chinese HTM SPD Mobile Too Many Pattern lock reset done Volcano Updated: 2014-10-13 Connecting... Connection successful,connected state! Version: V3.8 SN:619-078-953 Port:COM8 After format or Flash you have to press & hold power button for at least 1.30 mins. Note for win7 users : Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'. After that the spd drivers will have the ability to be loaded. Available Ports:COM8 Current Port:COM8 Available Ports:COM7 COM8 failed to open port. Ready to read/write again, please remove the power supply clip or battery and then re-loaded it. Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 00AD00BC90555600 Flash Type:[Hyundai] NAND_HY27UT088G2A FLASH LEN:0x20000000 Reading...(0) Ready to read/write again, please remove the power supply clip or battery and then re-loaded it. Waiting for phone's response, press the Power on the phone Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 00AD00BC90555600 Flash Type:[Hyundai] NAND_HY27UT088G2A FLASH LEN:0x20000000 mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 200m(system),180m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory) Analysis flash internal data successfully. Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 200m(system),180m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory) Analysis flash internal data successfully. >>Set to Factory successfully.