Quote:
Originally Posted by brunobbtj  Hello,
Please see log in i9300
06/10/2014 15:51:41 >> Device Ready...
06/10/2014 15:51:41 >> Device Ready...OK!
06/10/2014 15:51:41 >>ID check...
06/10/2014 15:51:42 >>Level (V): VCC V18 VCCQ D0 CMD CLK
06/10/2014 15:51:42 >>3.3 Pullup: 0.01 0.02 0.00 0.71 0.78 0.00
06/10/2014 15:51:42 >>Power On : 2.83 1.77 2.48 0.72 0.75 0.01
06/10/2014 15:51:42 >>Set Low : 2.83 1.78 2.48 0.05 0.03 0.00
06/10/2014 15:51:42 >>Set High: 2.83 1.78 2.48 2.02 2.04 2.03
06/10/2014 15:51:42 >>...
06/10/2014 15:51:42 >>Work Voltage: 2.83 1.77 2.48 1.03 1.73 0.02
06/10/2014 15:51:42 >>---------------------------------------------------
06/10/2014 15:51:42 >>eMMC ORC: C0FF8080 FF
06/10/2014 15:51:42 >>eMMC CID: 15010056545530304DF17A1E66DA6F
06/10/2014 15:51:42 >>eMMC CSD: D02701320F5903FFF6DBFFFF8E4040
06/10/2014 15:51:42 >>ID check: 00010015
06/10/2014 15:51:42 >>Product name: VTU00M
06/10/2014 15:51:42 >>User partition size: 3AB400000 ( 15028M / 14.675G), 15758000128 Bytes
06/10/2014 15:51:42 >>Boot partition size: 0x200000 ( 2.0M )
06/10/2014 15:51:42 >>RPMB partition size: 0x20000 ( 0.1M )
06/10/2014 15:51:42 >>ID check...OK!
06/10/2014 15:51:42 >>Erase chip...Boot1
06/10/2014 15:51:45 >>Erase chip: 3.15 sec.
06/10/2014 15:51:45 >>Blank check chip...Boot1
06/10/2014 15:51:46 >>Blank check chip: 0.81 sec.
06/10/2014 15:51:46 >>Erase chip...Boot2
06/10/2014 15:51:49 >>Erase chip: 3.12 sec.
06/10/2014 15:51:49 >>Blank check chip...Boot2
06/10/2014 15:51:50 >>Blank check chip: 0.80 sec.
06/10/2014 15:51:50 >>Erase chip...User
06/10/2014 15:51:57 >>Erase chip: 7.00 sec.
06/10/2014 15:51:57 >>Blank check chip...User
06/10/2014 15:52:06 >>Blank check chip: 9.31 sec.
06/10/2014 15:52:06 >>Power supply of the Device is out!
06/10/2014 15:52:07 >>Erase chip lost!
Box is damaged??
Thanks |
No, its not box problem. 1st i9300 has vtoon EMMC chip which has much problem as we have already mentioned in the section. Secondly, you did not use the GPG Power Adapteor
So, better give more detail of this device, use power adapter, use short wire between device and GPG EMMC box.
For more:
http://forum.gsmhosting.com/vbb/10012636-post5.html
and
http://forum.gsmhosting.com/vbb/10470361-post2.html
and
http://forum.gsmhosting.com/vbb/10419568-post4.html
Still, you can't solve your problem, change the EMMC IC of your device.
GOOD LUCK!!!
BR
Dipendra Pathak