View Single Post
Old 11-29-2014, 07:26   #25 (permalink)
Freak Poster
Join Date: Mar 2010
Posts: 201
Member: 1260168
Status: Offline
Thanks Meter: 58
Problem solved MTS zte s183 8mb flashed sucessfully with Easy Jtag
here is log

Check security...OK
Initialising: Generic QSC1100 Config ver.:1.00
I/O Level set to : 2600 mV
Connecting to Target...
JTAG device: QSC1100
CPU IDCODE : 0x122C80E1 Mfg.: 0x070, Part: 0x22c8, Ver.: 0x1
CPU Manufacturer: QUALCOMM , CPU Name: QSC1110 Rev 1.0
Halting CPU...
Initialize hardware...
Starting target communication...
Detecting NOR memory parameters of bank (0) ...
NOR FlashID:0001:007E 'S29NS128J 16MB (Spansion)' found
Checking NAND Image : D:\RIFF BOX\RIFF BOX\FLASH FILE\ZTE\S183 C132\ZTE S183_B03_May16 2013.bin
File successefuly loaded!
Writing memory from file...D:\RIFF BOX\RIFF BOX\FLASH FILE\ZTE\S183 C132\ZTE S183_B03_May16 2013.bin
NOR Write OK! Elpsed time: 704.703125s (11.625 KiB/s)
  Reply With Quote
Page generated in 0.12043 seconds with 6 queries