[ashraf_bcs]

Originally Posted by hm.faizan

here is screen shot




not need to write full dump just repair with ATF EFS afp file

GT-I8150_EFS_MODEM_ST1_MODEM_ST2 - Download - 4shared - Linus Hernandez

here is EFS afp

Yes,Done.Thanks a lot brother.


1. Make sure JTAG Connection is 100% OK
2. Phone BATTERY should be CONNECTED!!!
3. Connect RJ-45 JTAG Cable to ATF Box
4. Connect USB Cable to the Phone
5. Click RESET JTAG button to check JTAG Connection
6. Click RESTORE BOOT button to Start Operation
----------------------------------------------------------
Restore Boot...
Waiting for Device Connection 10 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting eMMC #1 ID...45010053454D30344790203BFAB3CFA2
Flash Description: ******* SEM04G, 3.69 GiB, SN 203BFAB3, Dec 2012
Partition Config: No boot enabled, Boot ACK OFF (0x00)
Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
Testing Device Memory...OK
Sending Flash Loader...OK (170665 Op/Sec)
Restoring Partition #1...OK
Restoring Partition #2...OK
Restoring Partition #3...OK
Completed in 0h 1m 14s. Code Download Speed 124 KiB/sec.
Boot Restore Done!
================================================== ===========
Assemble Phone and Start Normally
If Phone cannot Start, perform USB Firmware Update Procedure
================================================== ===========