| Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: I9515XXU1AND3_I9515DBT1AND1_DBT_Germany_Android_4. 4.2.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing SBL2 section...
SBL2 section has been written successfully.
Writing SBL3 section...
SBL3 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing PERSDATA section...
PERSDATA section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM3
Phone connection failed
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Port is busy
Connecting to phone on COM202
Mode: Normal
Phone model: GT-I9515
Firmware compiled date:
Firmware compiled time:
Firmware released date: -ů~
Firmware released time:
SW version:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM202
Selected model: GT-I9515
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Port is busy
Connecting to phone on COM202
Mode: Normal
Phone model: GT-I9515
Firmware compiled date:
Firmware compiled time:
Firmware released date: -ů~
Firmware released time:
SW version:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM203
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM201
Selected model: GT-I9515
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9515
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM201
Mode: Emergency
reflash ok
make Factory data reset and wipe cache partition ok
enter "*#0808#" number, select "DM+Modem+ADB" ok
but read information in main softwear not boot |