GSM-Forum - View Single Post

naazerkhan · 01-23-2015, 10:17

Welcome to Octoplus/Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-I9515 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#9090#" number.
12. Set "Diag config" to "USB" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected firmware file: I9515XXU1AND3_I9515YJV1ANE1_KSA_Saudi_Arabia_Andro id_4.4.2.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing SBL2 section...
SBL2 section has been written successfully.
Writing SBL3 section...
SBL3 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MDM section...
MDM section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing PIT section...
Writing Firmware Failed
Please put the phone into Download Mode and connect USB cable.
To put GT-I9515 into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing PIT section...
Writing Firmware Failed

flash compleat after hang on samsung

now phone e: failled to mount/system(invalid argument)

01-23-2015, 10:17	#8 (permalink)
naazerkhan Freak Poster Join Date: Jun 2009 Location: Sky Mobile™ Posts: 441 Member: 1049764 Status: Offline Sonork: 100.1678585 Thanks Meter: 62	Welcome to Octoplus/Octopus Box Samsung software version 1.8.1 ----------------------------------------------------------------------------------- To connect GT-I9515 phone you have to perform the following steps: 1. Disconnect USB cable from phone. 2. Go to Menu->Settings->More->About Device. 3.Tap on "Build number" 7 times to enable developer options. 4. Go to Menu->Settings->More->Developer options. 5. Turn on "USB Debugging" option. 6. Go to dial window. 7. Enter "#0808#" number. 8. Select "DM+Modem+ADB". 9. Press Home button. 10. Go to dial window. 11. Enter "#9090#" number. 12. Set "Diag config" to "USB" value. 13. Restart phone. 14. Press "Read Info" in software. Selected firmware file: I9515XXU1AND3_I9515YJV1ANE1_KSA_Saudi_Arabia_Andro id_4.4.2.oct Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing ABOOT section... ABOOT section has been written successfully. Writing SBL1 section... SBL1 section has been written successfully. Writing SBL2 section... SBL2 section has been written successfully. Writing SBL3 section... SBL3 section has been written successfully. Writing RPM section... RPM section has been written successfully. Writing TZ section... TZ section has been written successfully. Writing BOOT section... BOOT section has been written successfully. Writing RECOVERY section... RECOVERY section has been written successfully. Writing SYSTEM section... SYSTEM section has been written successfully. Writing MDM section... MDM section has been written successfully. Writing APNHLOS section... APNHLOS section has been written successfully. Writing CACHE section... CACHE section has been written successfully. Writing HIDDEN section... HIDDEN section has been written successfully. Firmware writing successfully completed. Selected firmware file: PIT_I9195XXUBML4_2340422_MULTI_CERT.oct Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing PIT section... Writing Firmware Failed Please put the phone into Download Mode and connect USB cable. To put GT-I9515 into Download Mode, You have to perform the following steps: 1. Reconnect the battery. 2. Press and hold "Volume-" + "Home" + "Power ON" keys. 3. When phone turns on, press "Volume+" key. Found phone on Firmware write started. Writing PIT section... Writing Firmware Failed flash compleat after hang on samsung now phone e: failled to mount/system(invalid argument)